Satellite L300 - 2 6 (PSLB8E) connection problem XP WLAN

Similar Questions

• Re: Satellite L300-1AS - unable to connect via a WLAN

  Anyone, please help.

  My L300-1AS connects not wireless.

  The switch on the front is on and to the left, the F8 function key turns on the light and offshore, but even with it on, when I try to connect to a network it tells me that it cannot find. The diagnosis tells me to make sure that the wireless feature that it is. I'm sitting on top of the router and using another PC for this type so that the signal is there.

  I looked in Device Manager and in adapters network and when I do properties on the Intel(r) wireless WiFi link 5100 he says its working properly. The 'Update Driver' button tells me his up-to-date.

  It's as much as I think I'm able to check.

  Any help please.

  Hello

  I have a Satellite L300 too but it s a L300-10 q, but it should be very similar to yours
  In any case, the hardware switch on the front of the laptop must be on the right side. On my laptop on the right side is marked with and the left side with judgment.
  Check again!
  If you are not sure, take a look in the user manual.

  In addition you can enable/disable WLAN with FN + F8.

  If it doesn't work you should try to update the WLAN driver on your laptop. See the Toshiba WLAN portal for a newer version:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Satellite L300-1AQ unable to connect to the WLan

  Hello

  I'm a novice at computers so any help would be grateful.
  My husband bought my laptop Toshiba L300-1AQ 5 days ago, I am trying to link up to my netgear router, when I look at my wireless network I can select my network as its signal strength excellent.

  But when I go to connect it just happens like windows cannot connect to my netgear Wireless association failed because windows did not receive response from the access point or wireless router.

  The wifi light is amber and when press FN + F8 the wireless is turned on?
  Please point me in the right direction im running on Vista Home premium.
  Device Manager my network card is showing the link of wifi wireless intel (R) 5100 that the device works properly.

  Any help please.

  Kind regards

  Shelley

  Hello

  The problem may be the router itself. Restart your router and try to connect again. If the WIFI network is encrypted be sure to use the right WIFI password.
  If nothing helps, please contact your internet provider. Make sure your router is good configuration.

• Satellite L300-217 - unable to connect to the WLAN

  I can see the SKY network, I am trying to connect to (5 bars). _I can't connect_ (despite having the network encryption key). The error message is 'user timed out' (he thinks little about when I press on connect)

  I have a connection of network wireless WPA Old Virgin that I can't remove. I hit delete and he disappears for a few seconds then comes back. SKY seem to think that this is the problem

  I have updated the Atheros wireless network cards so my Realtek

  Any suggestions? Thank you

  Hello

  What is SKY network? Is this normal router WLAN you have at home or what it is exactly?
  This network is probably blocking the new MAC addresses. If the MAC address of your wireless network card must be allowed on this router.

  I put t think the problem is your old WLAN connection. This doesn t affect other connections

  > have updated the Atheros wireless network cards so my Realtek
  What WLAN card you have exactly?
  You need a single driver because that one wireless network card is installed.

• Satellite L300-11th: unable to connect to the WLAN

  When I try to connect via WIndows - it cannot get an IP address. When I try to connect life PROSet - I get the message that WLAN driver is not installed.

  Driver for RTL8187B since the Toshiba site has been installed successfully.

  There is no Bluetooth in my model.

  Your laptop still has factory settings or you have installed your own operating system?

• Re: Satellite L300-254 - need Win XP driver for WLan and FN keys

  I have laptop satellite L300-254 pslbge and have problems with drivers. This computer was emty (no recovery disk or drivers) then I bought it.

  I installed Win XP SP 2 disabling AHCI. Instaled the common Modules, Chip Set Utility, and when I try to install the drivers of controls (for the Fn keys). It is said that I did not install common Modules.

  Tried to install the WiFi drivers (realtek, but I do not know if the wlan hardware is realtek), but it is not recognized in Device Manager, (? ethernet controller), Lan works well.

  So please help me with wlan and the Fn keys problems

  Hey Buddy!

  I m using a Satellite L300 too with XP and I t notice any problem. It works correctly and the Web from Toshiba site displays all the drivers and tools for this.

  However, firstly everything that you should make sure that you have installed all the drivers for your laptop. The site Web of Toshiba shows only Realtek driver for WIFI then I guess you have Realtek WLAN card. You can run setup.exe to install drivers or if you get an error message?
  If you are not sure, you can also check what WLAN card you have on this site:
  http://www.PCIDatabase.com/
  The vendor and device ID, you can see in-online WLAN card properties Device Manager.

  Toshiba tools for FN keys, I can only say that you must install applications first Toshiba and then all the other common Modules. Common modules are required for all Toshiba applications works. Then remove the tools installed Toshiba and use this installation order that I used successfully on my Satellite L300:
  Toshiba Common modules
  TOSHIBA Hotkey utility
  Toshiba Touchpad POWER utility
  Toshiba Utilities
  Toshiba controls
  TOSHIBA Power Saver (not necessary, but very nice tool).

  I hope I could help a bit.

  Good bye

• Re: Satellite L300-1DN - unable to connect to the internet

  Hello guys! I recently bought a Toshiba laptop - Satellite L300-1DN and I can't connect to the internet wirelessly or by cable.

  I tried to turn on the wireless button and my laptop recognized my network without wire from my house, but he just not able to connect. Then I tried to connect the cable, but my laptop itself connected to an 'unidentified network' and the internet still does not not :(

  The internet works perfectly fine for my old laptop and my other roommates. So I guess that is not a problem with my router itself.

  I don't know computers very well, so I'd really appreciate your professional opinion!

  Thank you very much!
  Scarfy

  > One last thing, I tried to connect to an unsecured wireless network and it worked!

  It looks like a problem with your router. Check this box and look on the site of the factory for an updated firmware.

  Make sure the laptop and the router using the same standard WiFi (for example 802.11 g).
  Disable all the functions of economy of the WLAN card in Device Manager.

  Last but not least follow Luke posted.

• Satellite L300-1BV - how to connect to the TV?

  Hello
  Should what cable I plug the Satellite L300-1BV to my TV?

  Thanks for the answers in advance

  Hello

  What video ports you have on your Satellite L300 of output?

  I have the Satellite L300 too but he has only normal VGA output. This means that I m using a cable RCA VGA adapter to connect it to my TV. After that I connected the cable that I turn on the TV and then the laptop. On the laptop, you can switch between monitors now with FN + F5.

• Satellite L300 has no internet connection wireless

  Hi all

  I can not connect to wireless internet on my Satellite L300. It is not a connection in the network connections window. I'm completely stuck. Any ideas?

  Thank you

  Stand by. Is your favorite visible WLAN for your Satellite L300 or not?
  Otherwise make sure that the wireless network adapter is enabled correctly (WLAN switch on IT and FN + F8 to enable the wireless network adapter)?

• Satellite Pro A40 can't connect to the WLan using the Win XP

  Hi all

  Newbie on your site so thank you in advance for your answers ;-)

  Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.

  Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?

  It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.

  Any ideas please?

  Thanks Mike

  Hello

  First of all, you must update the WLan driver.
  I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.

  In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
  If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.

  Last but not least, you can try to use this command in a DOS (CMD)
  Ipconfig / renew

  Big names

• Satellite M70: I can't connect to the WLan access point

  I have several wireless laptops, all work fine - except my M70.
  I use Intel Proset, and he sees the access point, but says "unable to connect" when I try.
  The signal is high (2 meters distance).

  I tried with WEP, WPA and without security. I am absolutely convinced that I entered the right keys.
  The access point is a Belkin Pre - N-, but I tried with a point of access 3Com, with the same problem - my Ipaq, my other PC, and all guests can connect,- but not my Toshiba!
  The wireless card is the standard Intel, with the latest driver from October 2006 intalled.

  Getting desperate...

  Hello

  If you get a signal strong, so I guess that the laptop is already connected to the access point. Or am I wrong?
  On my laptop, the computer WLan small icon appears only if I connected to the Wlan and then I can see the State of the signal.

  However, you suggested to use the Intel Proset utility to configure the WiFi network but on the clean Windows configuration. Have you tested it?

  This question seems very strange to me.
  Sometimes it of not possible to connect the WiFi network because of poor compatibility between the router and wireless network card.
  My router supports Wlan AB mode and my second card for computer laptop support BG.
  That's why I m not able to connect to the Wlan. Maybe it s also your case.

  On my router, I can also put the MAC address filtering. You should check this option on your router.
  But generally it is not easy to say why it happens. You know you should check every single option and if it s not possible so I guess that it s a compatibility issue.

• Satellite Pro C870-1E2 - internet connection problem Proxy Server not responding

  My old Toshiba computer connects to the internet via a numbered port,
  yet my new Toshiba Satellite Pro C870 1E2 connects to the internet through a proxy server.

  Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  When I tried the old computer connected instantly he had to wait a long period of time before that the "proxy" got it's act together.

  Advice please?

  > Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  And why you think you ve you have a problem with the Satellite laptop? I understand the original message: the Satellite acts as client.
  In my eyes there is a problem with the proxy server, and this should be checked first.
  Its almost impossible to tell which could affect the proxy, but as a first step, a reboot would be desirable.

• Satellite L300 restart loop if connected to the charger

  Hi all

  My small laptop (Win-7 32) of Toshiba Satellite L-300 which is 3 years old is stuck with a strange problem to enter a loop of reboot if connected to the charger.
  It works fine on battery.
  But it goes into a loop to restart at the point where I plug in the charger.
  I tried without battery by plugging in the charger, the problem still exists.
  Tried to change shippers that always the same thing happens.

  The method of isolation of the problem, I have concluded that the battery and charger are not the reasons. What else could be? Help, please

  Please help identify the problem.

  >... problem to enter a loop of reboot if connected to the charger.
  How to understand this?
  What happens when you press the button walk / stop?
  On what level mobile restarts?

• Satellite Pro m USB devices connection problems

  Hello visitors and insiders.

  can someone help me, please? - or are the causes of the problems of programmed BIOS is not perfect?

  I put on the USB Ports (I tried all 3 Ports) after correct installation of the most recent drivers for devices and the BIOS and chipset.
  I tried MAGIX encoder by USB and PINNACLE for USB encoder - both signal-request-problems and the two could not shut down the system after connecting with USB and close with her current for USB device.

  I tried this on different WinXP installiations (multiboot) - but on all systems even.

  The same reaction has been, as I have connected a special CUSHION cooler for laptop with additional USB Ports.
  The CUSHION cooled - but the USB Ports do not work for all devices (devices I am familiar with the)
  Ports of origin of the laptop, has failed to TRIM, too). (worked directly devices: mouse, webcam, keyboard, drive hard usb)

  What should do? .. If anyone know Somethin ' help... I will be very happy.

  Thank you very much!!! (Sorry for my English is not perfect)

  Ben

  Is what model of laptop exactly?

  Have you installed Windows yourself? Or it was preinstalled?

  Looks like it's a software problem, bad drivers USB can at fault.

  You are able to back up your data and run recovery?

• Satellite Pro C665 and internet connection problems

  Hi, will try and give as much information as I can, so sorry for the long post.

  I bought this new laptop in August is so very old, I connect to the internet with modem USB 3 G telstra and a cycle of 3 weeks he began to abandon the connection within 30 seconds approximately.
  The blue LED on the identification of the USB modem still flash, it has a connection, but I would get the yellow explanation mark on the icon of internet connection in the task bar.

  Now, the only way to recover the connection must close the connection of Telstra, unplug it, plug it back in and reconnect, a few times I have to reboot and will have to go through this routine 5 - 6 times and sometimes up to 10 attempts before I get a stable connection.

  So first I thought it might be the USB modem, so I got a replacement of telstra, but made no difference, then I had a replacement sim card and still no luck.

  Then I did a new install of Windows 7 and installed all the current updates, still no go.

  I then bought a wireless router to eliminate the USB connection and still have the same question.

  Sometimes it can be very frustrating trying to get a solid connection, but once it gets a good connection, it will stay connected for hours without any problem

  I'm not an expert with computers, but can usually find a solution to problems of software, I have, but that left me speechless and I think I've covered most of the region to address this.

  Thanks for your time.

  Unfortunately I can't say anything on Telstra 3 G USB modem. Toshiba doesn't support third party hardware, software and does not offer any kind of support.

  I put t know where you got this USB modem but I m wondering you didn't visit their store and test in functionality it bring your laptop with you. The people who work there could make inspection on site.

  I also put t know why you have this problem at home. Your router is not known to us, but is there a difference when using WLAN secure or unlocked and without password?