Satellite L300 - 20 d - after updating the BIOS, that it does not start now

Similar Questions

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My HARD drive is detected by the BIOS, but it does not start

  I have a laptop, OS is Window7, the HARD drive is detected by the BIOS, but it does not start, I formatted and the procedure going well until the reboot, it starts not to finish formatting.
  Please, I need help!
  Thanks in advance

  Hello

  Sounds like the hard drive has failed, or other hardware issues affecting the reader by the mother-
  Board or wiring.

  Check with Lenovo support, online documentation and diagnostics and ask questions about known issues in their
  forums.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  ---------------------

  The manufacturer Diagnostic utilities - use them to check the disk.

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en

  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Just downloaded LR 5.3 and after update, the lens correction Panel does not appear on develop module.

  I just downloaded LR 5.3 and after update, the lens correction Panel is not displayed on the develop module.
  One having this problem?
  Thanks in advance.

  Right-click anywhere in the area of HHR panel and check the "Correction of the lens' to display the Panel.

• Satellite A-C50-K9K - after updating the BIOS, cooling fan is very loud

  Gas station proposed to update the BIOS. 1.00 to 1.30. After updating the cooling system is 90% of the time. Load the default settings BIOS do not change.

  No backup of the BIOS. Is it possible to download BIOS 1.00 or solve this problem?

  The downgrade of the BIOS is not possible because you n t have the first version of BIOS and even if you get the 1.0 version of BIOS, the BIOS update procedure is not possible because the newer version is already flashed.

  But I recommend you set the method in Windows to optimize power or better management the cooling battery life

  + Control Panel--> Power Options--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method.

• After updating Windows twitter blackBerry smartphones does not start

  I downloaded the version 2.0.0.11, and the application does not start.
  Could you help me? Thank you
  Rodrigo

  Do a simple reboot on the BlackBerry this way:

  With the BlackBerry powereddevice, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

  Now, please try again on Twitter.

  Even if you already have, please try again.

• I have windows Vista Sp2. Cannot get into the BIOS. Computer does not start on the desktop. What can I do?

  Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

  Someone at - it ideas. Thank you.

  Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

  Someone at - it ideas. Thank you.

  Don't ned to start the Office before accessing the BIOS...

  The following tutorial is about changing the bios boot sequence.
  #1 step is how to get to the BIOS window. THIS show be what you need. You can skip the rest if they do not apply to you.
  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• Satellite L50-B-177 - after upgrading the BIOS can not use the Polish symbols

  Hi, I'm newbie here. This is my first post, so sorry for the plain text.

  I have a problem with the laptop Satellite L50-B-177 1 month of my wife. After update BIOS (from Toshiba Service Station) to version 1.70 I have this problem: it is impossible to use symbols of Polish that comes with ALT + z, ALT + x, ALT + c. other - ALT + a - works normally.

  Problem is the operating system independent (even on the live session of Ubuntu). I understand that this is a specific problem for the location of the Poles, but causes cell useless for my wife (she is a teacher and write a lot of text). As much as I know BIOS downgrade is not available for customers, and the weeks of waiting for the new package of BIOS is out of the question.

  Any suggestions will be appreciated.

  Hello

  This problem occurred imadiately after updating the BIOS?

  Have you tried to set the BIOS settings by default once the update is complete?
  If this isn't it.

  Also, check if the Polish keyboard language was chosen correctly and as a default value.

  Comments are greatly appreciated.

• HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

  Hello
  
  WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

  Update driver BIOS update effective system is rebooted and the wifi does not.
  
  Please help me.

  In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

  Select the update that is dated from when you had the question.

  Click it to uninstall.

  You have to restart the laptop afterwards.

• G72-a20EM screen has stopped working after updating the BIOS F.48.

  How is it possible that BIOS update recommended could turn off the LCD screen.

  Currently I see almost anything on the screen, but vga port works. But increasingly,.

  Intel graphics card is not recognized.

  G72-a20EM screen has stopped working after updating the BIOS F.48.

  What can I do to fix that?

  Good news!

  I found the working version, and it is version F.08.

  Supposedly new version have different Active cables, and this is the reason why the screen is dark.

  So, case closed, everything is perfect.

• I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.

  After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]

  A few external links to help you set permissions:

  MAC

  OS X Yosemite: set permissions for items on your Mac

  WIN

  Set, view, change, or remove permissions on files and folders

  r-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed http://Answers.Microsoft.com/en-US/Windows/Forum/windows_vista-Files/How-do-i-change-folde

  Kind regards

  Ashutosh

• Get the error that store is not available now, please try again after some time in Windows 8 Enterprise.

  IM using windows 8 Enterprise.

  When im opening the windows store im getting the error that store is not available now, please try again after some time
   
  Original title: store does not connect

  Hello

  Please, try the Troubleshooting Windows App tool mentioned in the following article and see if that helps:
  http://www.kapilarya.com/download-Microsoft-accounts-Windows-apps-troubleshooters-to-fix-casual-issues-for-Windows-8
  Hope this helps, good luck :)

• my computer has the power, but it does not start.

  my computer has the power, but it does not start. crancking for several minutes, after that it will quickly be able to record and then it starts again. Also, he asked once to restore to an earlier date that I did. He worked for a night, but come back to the same thing. Help!

  Hi moozer_890

  
  1 during how long have you had this problem?
  2. have you updated display drivers installed on the computer?

   

  Method 1 :
  To resolve the problem, you can see if the uninstall and reinstall then the display driver-
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Method 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site, then check.

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW