Satellite L300-215 - BSOD after upgrade to Windows 7

Similar Questions

• Satellite L300D BSOD after upgrade to Windows 7

  I got this laptop (Satellite L300D) for a little more than a year with windows vista (32-bit) running and there were no problems. However, I've recently upgraded to Windows 7 (x 64) and became the problems since the first reboot.

  On the first reboot after installing windows 7, the computer off just after the "Starting Windows" screen Turn on again took me to the repair of the system where he performed a system restore and I was able to start successfully even once. I thought that the problem had something to do with the automatic updates, so I disabled the and tried to restart to see if the problem has been corrected. This time, after the "Starting Windows" screen I got a BSOD of unrecoverable system error. After several attempts to reboot and multiple attempts to repair system (which usually says she didn't) it started correctly again.

  This problem has been going for about 3 weeks now and it is quite irritating. The results of the system of compensation for claims that a "Boot critical file is corrupt", but it starts eventually after several attempts to start. He also has a habit of turning at random during the race (it happens about once or twice a day). So from now on, whenever I chaque fois que je tente tries to start my computer it shuts down after the start screen or give the BSOD and restarts and the only way to make it work seems to be to keep trying to start and hope for a successful boot of the system upward (this happens finally after a few failed attempts).

  I did some research on this and came to [this | 1251 http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L300D-ST3501&rpn=PSLC8U&category=&selCategory=3&moid=222 & os = & ct = DL & selFamily = 1073768663] page. I think that's exactly what my problem is (need to update the BIOS), but if I understand correctly installing windows to do this only for 2000/xp/vista and I am unable to use the second option to boot from the disc as I get the BSOD before he gets to that point. I should try the windows install option although I am running windows 7 or is there another way to update the BIOS? Or I'm off completely and the problem is with something else?

  I wasn't sure what information I would like to add to this post so if need more information please let me know.

  Thanks in advance

  Edit: Oops, just realized the page I linked is not link to exactly what I had opened. I do not speak of 'critical BIOS updates for Windows 7 64-bit' under 'support form '.

  Post edited by: Jacob27

  Hello

  First of all, it would be interesting to know what code BSOD, you get exactly. Can you post this information useful? Normally, on the Microsoft Knowledge Base, you can find additional information about most of the BSOD codes and so you can start to solve this problem.

  BSODS are often associated with drivers or RAM/HDD. The latter, you can check with special diagnostic tools, Memtest86 for RAM and Drive Fitness Test for the HARD drive. These two tools are free and you can find it using Google. You can download an iso image of them to create a bootable media where you can start the test.

  Regarding your update to the BIOS: I put t know what L300D you have exactly, but according to the Toshiba site it shows an update of the BIOS also for Windows 7 64-bit. You can try to install it.

• Satellite C670 problems start after upgrade of Windows 10

  Hi all

  I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinctions I can once again the password login screen. Have already reinstalled Windows 10 because I did not come to the login screen more. But the problems are still there with ignition and extinction attempts it works. But this isn't a solution. You have ideas - drivers for Win10 or bios? Thanks for help

  Hello, I have the problem of the grandmother after the installation of Windows 10 I have nothing white screen
  Impossible to do a spanking Granny restore F8 or F12 nothing to do
  If someone gives you the solution I'm interested
  Thank you, CDT

  
  Validation has been translated by Google Translator

• Satellite U940 really slow after upgrade to Windows 10

  Hello

  Just upgraded the Windows 8.1. Windows 10 installation on my laptop U940-100 with 32 GB SSD for implementing caching.
  The laptop really performed very well (fast start etc.) until this upgrade.
  It seems that on the SSD caching does more.
  Anyone familiar with this problem? I can't find any useful information on the Toshiba site.

  Thanks in advance!

  Hello

  I had the same problem of yours on my 940-11 K,

  I solved it very easily just by installing the drivers for fast boot Intel and Intel Rapid Storage Technology drivers.

  You can download the latest version from the Intel site, here is the link:

  https://Downloadcenter.Intel.com/Dow...art-technology
  https://Downloadcenter.Intel.com/it/...-rapid-storage

  I have upgraded to Windows 10, then I installed the drivers.
  After each driver installation, I did a reboot.
  SSD caching should automatically work again after these 2 steps.

  You should see an improvement in performance just after.

  I hope this will help you!

• Satellite L730 - Bluetooth problem after upgrade to Windows 10

  Hello. I use a portable Satellite L730 and the only thing that would prevent me from upgrading to Windows 10 is the problem of Bluetooth. RFHID, RFCOMM and RFBUS will not work properly because there are no drivers. Apart from that, the computer there is no requirement of meeting problem Windows 10.

  So is it possible that a sollution to this problem will be provided anytime soon?

  Hello

  In most cases, BT does not work due to lack of BT software.
  The point is that most laptops use a module for WLan and BT.
  This combo module WLan/BT requires additional driver filter...

  According to your WLan / module BT, you will need to install the filter for the BT driver package.
  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10...

  But you have to watch for the manufacturer of modules... There are different modules like Atheros, Intel or Realtek

• Satellite L30 - frequent BSoD after upgrade of RAM.

  This problem is almost identical to [this post | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=144540𣒜], but given that the response was too general and did not help, I want to provide more details about my problem and hope for a better answer.

  My L35 (i.e. American L30) came with Vista Home Basic and only 512M of RAM. It was slow, but smooth otherwise. The problems started after I upgraded the RAM to 2 GB occasionally a BSoD will appear, and the computer restarts after a second or two.
  Most of the time, instances of BSoD are not taken at random; usually, it happens when you watch a film or multimedia and online during the wake her up after suspend.
  Also, it happens much more frequently if an external monitor is attached. He does, connect an external monitor and watch a movie will result in BSoD with 100% certainty. My laptop has shared video memory, maybe it's a question here.

  The problem prevailed after that I installed Windows 7.
  Memtest86 + showed no problems with my memory
  Memtest86 covers all aspects of the use of the RAM?

  Is it possible that some problems may be overlooked by memtest86?
  Are there other tests of memory, that I could use, specifically to test the shared video memory?

  Not every hardware problem can be detected software.
  You have tested the RAM with Memtest86 +? Try using Memtest86 (no +).

  In the worst case, you must replace the RAM. Ask the dealer for a new computer. I m sure they will help you.

• Random BSOD after upgrade to Windows 7 for Win Vista

  Hello

  I am getting random BSOD, system crashes etc... After that I updated to windows vista.

  It is not a custom built PC, but I checked the inside of the box

  Plug-

  Intel Core2Duo

  4 GB of Ram

  1 TB HARD DRIVE

  NVIDIA Gt 140

  (Big one) memory dump

  http://1drv.Ms/1pIf5US

  OM

  All first please change your control panel of the system to small (lernel) DMP.  It will save you a ton of time when you transfer files DMP.  You can read how in this wiki

  This accident was related to the corruption of memory, please run the Driver Verifier to find the underlying cause.

  These accidents were related to the corruption of memory (probably caused by McAfee).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & win 7 (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

• Satellite S70 - Numlock issue after upgrade to Windows 10

  Hello

  I just upgraded my S70 to windows windows 10 8.
  Everything seemed ok except that now when I press numlock the computer just beeps and the light comes on and off.

  The keypad is actually useless now (direction feature is present regardless of the State of the num lock key).
  There are no updated drivers and my laptop has its language settings for the keyboard like Qwerty of the United Kingdom.

  When I look at the overview of keyboard I don't see in the diagram of a keyboard. Can someone help me please the most frustrating.

  Thank you

  Try this to restore the NUM keys will

  Control Panel
  Ease of access Center
  Set up mouse keys
  Other settings: use MouseKeys when Numlock is: make sure that the OFF is selected.

• Satellite L755 - no webcam after upgrade to Windows 10

  Hi guys,.

  I recently updated my laptop (Satellite L755) 10 Windows in Windows 7. I have problems with the Web camera driver.

  Pls help

  Hello

  I read that you can use your old drivers of webcam Windows 8.1, and your webcam should function normally again.
  You can check this?

• WLAN on Satellite Pro L770-12R after upgrade to Windows 10 has lost

  OK, first of all, I must admit that I know very little about computers so be gentle!

  I have some cleaning on my laptop and uninstall programs I didn't need. All of a sudden my WiFi stopped working and there is no wireless option when I try to connect to the internet, it shows just connect using a cable. I guess that means that I accidentally uninstalled some software required to connect to the wireless internet.

  How can I get it back? Thank you!

  Natalie

  Hi Natalie

  Can you please tell us which model of laptop and operating system do you use?

  Please open the Device Manager and check the first WLAN card status. Wireless network card must be listed and properly activated it. As an example, I send you a copy of my laptop screen.

  

• No CD/DVD drive after upgrade of Windows 8 on Satellite Pro S300L

  The cd Rom drive no longer works after upgrade to Windows 8.
  The drive is not displayed in the Solution Explorer, either. It is mentioned: error in the register.

  I can not change the right driver in Device Manager - probably it was deleted.
  Is the driver of the * MATHSITA DVD-RAM UJ880AS drive * for Windows 8 available?

  How can I make my cd Rom drive working again?
  How can I fix the error?

  Could guide you me in registry change (upper and lower filters) if necessary?

  Post edited by: GRIX

  Hello

  Check please follow thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68988

  Here, you can find the solution to your problem.

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

  Hello

  2 days ago that I have upgraded to Windows 10 my HP ProBook 450 G0.

  Then I realized my graphics drivers are not working, I tried to update to the last registered in the section to download the drivers for my model.

  After that, I got BSOD and couldn't even see login screen. I removed the update installed in safe mode.

  If at the moment I use some default driver I guess.

  In the Device Manager on Intel(r) HD Graphics 4000 I something like (manual translation) "Windows has stopped this device because of disorders raported. (Code 43) ».

  I can't use the HDMI & display internal. To use the HDMI, I have to restart my PC. After using HDMI, I can't use internal display. A lot of questions, because this driver...

  I really need this, as I am a teacher and I ', using both internal display & HDMI for presentations...

  All solutions? All the newspapers that I can get to help you help me ?

  Kind regards

  Jakub Krol.

  Hello

  In case anyone is interested, my PC is now fixed

  More information: https://windowsforum.com/threads/graphics-issues-after-upgrade-to-windows-10-system_service_exception-sgfxk64-sys.220205/page-2 .

  Kind regards

  JK.

• Random Blue Screen Of Death after upgrade to Windows 7 Ultimate 64 bit

  I was running Windows 7 Ultimate 32 bit for many years without any serious problem. After the upgrade to Windows 7 ultimate 64-bit I was prey to a BSOD random. Sometimes I can get several BSOD in one day. Sometimes I could get any same-day heavy after multitasking.  The BSOD may occur during any task or when I try to quit. I have the latest drivers and BIOS. I disconnected all my equipment and refurbished it. I used the diagnostic tools to test my memory 4G and my Seagate 1 t SSHD hybrid and they passed. I changed the sata connection cable my HD to the MB. I did a Windows repair (scannow) and also done a repair install and it did not help. Although these questions is past the BSOD after upgrade to Win 7 64 bit, that I suspect may not be associated with Win 64 bit but could be hardware related. Any help to solve this issue will be appreciated.

  Kind regards

  Chris

  All 5 associated with your ATI video driver.

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?