Satellite L300-215 - how to use the Draft N Wlan

Similar Questions

• Satellite P300-133 - how to use the internet connection via BlueTooth

  Hello

  I finally solve my problem with the synchronization via bluetooth between my P300-133 and my [HTC | http://www.htc.com/europe/product.aspx?id=15674] with Windows Mobile 5 - with step by step instructions of Toshiba.

  But I don't know how to use the Internet via BT, I tried many ways, one of them was to create a PAN with P300 as server - correctly connected HTC to P300, but it seams I can share internet with P300 as a gateway. And I want to do the opposite - get internet from my mobile to the computer (while she is away from all the cables). I'm not sure this PAN in the right way...

  The question of the other and less important is to be able to share that connection with your laptop via bluetooth - I guess that this must be done through Pan

  Thanks for any help.

  Bartek

  You found a solution to this?

• Satellite L300 - RTL8187B - how to change the FCC to ETSI (13 channels)?

  Hello
  I bought the Toshiba Satellite L300-1BB in Poland (Europe).
  But after the installation of the driver (WinXP SP3) - World version of download Toshiba - WiFi I can use only 11 channels as in the standard of the FCC (American). How to force the wifi adapter to work with the standard ETSI (European) to have 13 channels available? Some points have set higher to 11 channel, and I can't use them.
  Thanks in advance for all comments and suggestions :-)
  Mac

  Check this box:
  + Why is it not possible to use all 13 channels WiFi on a Toshiba WiFi card? +
  http://APS2.toshiba-tro.de/KB0/FAQ35002P0001R01.htm

  I think that this article will explain everything.

  + In the USA and the Canada, there are only 11 permitted use WiFi channels. +
  + In Japan, there are 13 channels like in Europe. +

  + In order to use a WiFi card anywhere in the world, has created a so-called "WORLD Card" standard with 11 channels. +

• Satellite L300 PSLB8E - how to increase the ram clock speed

  I have a laptop which is equipped with 2 slots for ram PC2-6400
  1 - Samsung module M4 70T5663QZ3-CF7 [800 MHz] 2GB
  2 - Samsung module M4 70T2864QZ3-CF7 [800 MHz] 1 GB
  GPU: Intel GM45
  Processor: Intel Core 2 Duo T5870 Mobile @ 2000 MHz
  According to the manufacturer, this kit allows you to work with the 667/800 MHz memory speed, but the problem is that reference programs show the actual frequency of the ram at 399 MHz.

  Question No. 1:
  (a) why not clock the memory works in 800 MHz but only 399 MHz,
  (b) how to change to a 800 MHz

  Question No. 2:
  I'm going to buy a processor
  Penryn Core 2 Duo T9600 processor (1066 MHz FSB) (2.80 G) Hz or T9400 (2.53 G)
  and install it in the computer
  and increase the memory of 2 x 4 GB 800 MHz (8 GB)

  I explained that this possibility is provided for by the manufacturer according to the Maintenance Manual for:
  Toshiba computer
  Satellite L300/L305
  Satellite Pro L300
  EQUIUM L300
  SATEGO L300
  (PSLB8x/PSLB9x)
  (PSLBAx / PSLBBx)

  If this operation will help to improve system performance

  I put t know what programs you use and if it is good or not if this info can be good and perhaps not. I put t know. The fact is that you n t have one any influence on the functionality of memory and I doubt that you can do something and change some values.

  Exact specification for laptop laptop does not for me but I think that Satellite L300 must have Intel GM45 chipset and I presume that for your motherboard FSB is 667 MHz. You can improve up to 8 GB and compatible 4 GB RAM module has PA3670U-1M4G part number.

  Upgrade CPU on Satellite L300? I put t know man. A friend of mine has this model of laptop and I don t know if it's the right decision to spend money to upgrade this old model of laptop budget.
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

• Satellite L500-1WG - how to use the modem internal?

  I am new to computers and laptops and that you just bought the Toshiba Satellite L500-1WG. I was told, in the shop, he has an internal modem?

  What should I do to activiate/get connected to the internet? Do I need an external modem wired or wireless as well? No difficult language or abbreviations please, I am a total novice with very limited on this subject knowledge. Have only to learn how to start and run the basic set up.

  HEY buddy,

  > Told me, in the shop, he has an internal modem?
  It seems that this shop doesn't know what they are selling or they wanted kid a small round little

  It turns out satellite L500 is not equipped with modem and it doesn t have a modem (RJ12) port.

  So if you want to use the modem connection, you must purchase an external. But for now he s not advised to use a modem, the majority of the pages are not designed for modem more.

• Satellite - WIi 8 - How to use the SD card

  Windows 8 on Toshiba Satellite.
  I do not know how to connect my sd card

  I pop my card to build in reader and now what?
  Nothing happened and I don't know where to find the answer.

  Perhaps you could provide some i.e more details:
  What model of laptop do you have exactly?
  Have you changed anything in the configuration of the system?
  Do you use the Windows system preinstalled by Toshiba?

  Usually, if you insert the compatible! SD card in the SD card slot, after little time the SD card should be recognized by the system and should be visible in windows Explorer

• Re: Satellite L300-255: how to increase the shared memory graphic

  Hello

  My laptop is Satellite L300-255. I have improved it's ram to 4 GB. I want to increase the graphics card 1 340 MB. In the specifications of the laptop, he said that the graphics card can increase if the Ram has increased to 3 GB

  Thank you

  Post edited by: PauPau

  Hello

  Shared graphics memory is controlled by GPU driver. You cannot add or edit it manually.

  More depends on the Windows OS you use, because the 32-bit system can manage max 3.2 GB of system memory.

  For example:

  * (32 bit OS) *.
  System memory: 2GB | 4 GB
  Dedicated video memory: 128 MB | 128 MB
  Shared system memory: 702MB | 1214 MB
  TOTAL available graphics memory: 830MB | 1342 MB

  * (64 bit OS) *.
  System memory: 2GB | 4 GB
  Dedicated video memory: 128 MB | 128 MB
  Shared system memory: 702MB | 1631 MB
  TOTAL available graphics memory: 830MB | 1759 MB

  Hope I could help you

• Satellite L300-144 - how to replace the HARD drive?

  Hello!

  I have a problem: my laptop is Satellite L300-144, but I don't even know my hard drive model.

  Anyone know anything on this subject? And how replcae it? I mean where the hard drive is placed?
  And another question: is it available in BestBuy for example?

  THX

  Hello

  As Akuma said on the underside of the laptop, you will find a HARD drive cover is fixed by 2 screws I think. If you remove these screws, you can see the HARD drive and remove/Exchange it.

  Satellite L300 supports SATA 2.5 hard drives, and you can buy the HARD drive of every computer store where you want to.
  I have good experiences with Seagate and Western Digital hard drives but of course, you can buy a disk from a different manufacture. ;)

• Satellite L300/BCI: How to get the Microsoft Office 2007, Google earth, etc.

  Today, I bought one of these laptops Satellite L300/BCI
  When I turned it on it took about 5 minutes, make an installation after a while I accidentally pressed ESC while piking he then restarted the computer
  as soon as switched on, it worked but it was missing:

  -Microsoft Office 2007
  -google earth
  -Google Toolbar
  -Google Desktop
  -Google Picasa

  Is their anyway for me to get these programs back?

  Any help would be appreciated!

  Hi mate

  Just a question; are you sure that this application must be installed on your laptop computer at 100%?
  It's really hard to imagine that you have removed or deleted from the disk only by pressing the ESC key

  But if these applications have been pre-installed, so you should be able to get back the system restore to factory settings.
  I mean by installing the image of Toshiba.

  It seems that it is an Australian model of laptop. Is this good?

  Well, I'm not quite sure how it works on Australian laptops, but I think the procedure should be explained in the manual of user m! Check it!

  But in a few discussions such procedure has been explained and some have said that you must press the 0 key immediately after switching on laptop.

  However, manual control of the user, then you would be 100% sure how it works!

• Re: Satellite L300-1DN - how to use recognition of face for login

  Hello

  I recently bought a new Toshiba Satellite L300-1DN and I want to use face recognition to connect.
  I registered my face with the usual set up, until the movement of the head and side by side in a fixed sofa downstaires.
  Now here or in any position other than this couch I can't connect without a fault which is very annoying!

  Because I thought that I would probably be more connect from my office in any case, I have re-made the installer, which worked.
  Over and over in the exact position even newspaper failure!

  Now, whenever I try to re setup my face etc, I am going through the whole process and it fails.
  I've done about 5 times now and make me very frustrated!

  I just want to know if theres any way to connect with different places and run the perfect set up?

  Thank you, Joe

  Hello

  Maybe I can help my friend.
  I searched here in the forum for useful discussions and forum it here:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=147434

  The user shaaaaan has reported this statement:
  To use smart Toshiba face recognition software:

  First of all,

  step 1. Although it cannot be configured or whatever it is, check the weather its already installed in your system, to do,

  1.a. open 'computer' from the 'Start' button
  1.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
  1.c. double-click "Program Files."
  1.d. double-click "TOSHIBA."
  1.e. weather check the folder named 'SmartFaceV' exists in this folder.
  1.f. If the file exists, this means that you have installed, s/w face recognition even if it is not configured to use, skip step 2 and GO to step 3.
  1.g. Else if the file did not exist, this means that the software is not installed, if it does GO to step 2.
  step 2. To install the software of face recognition

  2.a. open 'computer' from the 'Start' button
  2.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
  2.c. double-click "Toshiba."
  2.d. double-click "drivers."
  2.e. double-click "FaceRecognition.
  2.f. Double click on "setup" - one with an arrow going into an icon of sortoff loop.
  2.g. follow the procedure step by step for installation.

  step 3. To configure the software of face recognition

  3.a. open 'computer' from the 'Start' button
  3.b. Double click "C:" drive or every time your windows is installed, by default the C: drive.
  3.c. double-click "Program Files."
  3.d. double-click "TOSHIBA."
  3.e. double-click "SmartFaceV".
  3.f. double-click "SmartFaceVSettings".
  3.g. follow the prompts. A word of counsel is to ensure that your face is well lit when you use the software otherwise, you end up spending a day in front of the software trying to get it configures your face with the selected account.
  3.h. To sheck it simply lof out press the "Windows key" AND "key of L."
  3.i. Then you will see the normal login page, click on the "Other" credentials and on the next page, click on "Start Face Recognition" & "Smile" :))

  Check it!

• Satellite L300-1AS: how to replace the touch pad buttons

  Hello

  I have a 16 month old Satellite L300-1AS, my question is simple, I hope.

  HOW TO REPLACE A DEFECTIVE TOUCHPAD/LEFT MOUSE BUTTON

  Thank you

  Hello

  To do this the laptop everything must be dismantled.
  It is very difficult and not recommended for common users other parts that can be damaged while removing the process.
  In addition, you will need to the right spare parts.
  These parts can be ordered from ASP in your country.
  But if I would you so I ask for the help guys

• Satellite L300 - 17L - impossible to use the keys FN under Win XP

  I recently bought a Toshiba Satellite L300 - 17L and I can't use the combination of keys (Fn + F1, F2...).
  I downloaded all my drivers Toshiba s website... but nothing... all utilities... and nothing.
  I use a Win XP OS

  Please, if you can help me...

  Hello

  As I m wrong not the Satellite L300 - 17L belongs to the PSLBCE.
  You must choose this series to download driver.

  I can find on the European driver Toshiba page all the necessary XP drivers for this series and as much as I know to install the * Modules * common for Win XP get the FN keys feature!

  If please check this and reinstall the common Modules!

  Good bye

• Satellite L450-12W - how to use the folder HDDrecovery?

  Hello

  I need to get this L450, but its owner did not get it back dvd.

  The system does not start, and he said:
  + BOOTMGR is missing.
  Press ctrl + alt + delete to restart +.

  I noticed the hard drive of 320 is divided into three partitions:
  first of all, hidden, SYSTEM, 400MiB, with the diag + flag +, and there's the Startup Manager (+ bootmgr, BOOTSECT. BAK+ and the folder + start +) and a folder called recovery + where there is a subfolder called + WindowsRE + which contains + winRE.wim +.
  second is WINDOWS, 149GiB, with the flag + start +; This is the operating system.
  in third place is given, 148GiB, no flag. Here's a folder called HDDRecovery size 6.4GiB and a folder called + MONICA-TOSH + where there are a lot of backups that I don't know how to use.

  Then, I tried to follow the manual, which know to press the 0 (zero) key when starting to start the recovery from the hard disk, but it did not work, no screen appears and the error message appears again.

  What should I do?

  Thanks, and sorry for my English, I'm Italian.

  EDIT: I forgot to say that I also tried to fix the problem with the Windows7 DVD repair tools, but he did not find any operating system with a Linux Live, I see that all the system files are in the WINDOWS partition!

  Hey Buddy,

  The HDDrecovery usable only if you are able to access the Windows Advanced Boot menu. There is an option called fix my computer which will start the Toshiba HDDrecovery.
  I put t know what the user manual you have, but AFAIK press zero will not work. You must press the F8 key to access the advanced boot menu.
  It work?

  If not, there is nothing you can do I think wait Toshiba Recovery disk Windows reinstallation. This will restore the preinstalled settings of Toshiba. If you n t have this disc, you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Alternative you can use a Microsoft Windows disk to reinstall Windows. After that, you have all the drivers and tools from Toshiba Web site.

• Satellite L300-129 - how to increase the video memory (shared)

  Yesterday I bought TOSHIBA Satellite L300-129

  AND I WANT TO ASK SOMETHING:

  I want to share some memory to improve the proceedings of VGA card.
  I know that I need to do from the CONFIGURATION of the BACK but I can't and I need to improve my VGA card because the default is so so small... I want to give him some PART of MEMORY (RAM) SYSTEM

  PLEASE I NEED HELP

  THANK YOU GUYS;

  Hey Buddy

  Unfortunately, I doubt that you can allocate a portion of system memory to video memory manually. AFAIK this sharing process is controlled by the driver for graphics card and all run automatically.

  On the other hand the graphics card driver could assign more memory for video card if the system memory could be upgraded.
  In other words the higher system RAM superior video RAM.

  Welcome them

• Satellite L350D-213 - how to use the WLAN?

  My mother & father has bought a laptop last week and are having problems with the connection to the sky broadband. Sky Broadband is a netgear router, which has wireless capability.

  My question is how does broadband on your laptop? They need to get a wireless dongle to use, my experience with laptops is minimal.

  Any help much appreciated.

  Hey Buddy,

  I think you should read the user manual. There you can find all the necessary information using the laptop.

  To use the WLAN functionality, you must enable this feature using the WLAN hardware switch on the laptop and the FN + F8 key combination. Check it!

  If the WIFI is enabled, check the configuration of TCP/IP. It s according to your router if you use DHCP or a static IP address.
  In addition you must disable management feature in the management of WLAN power supply.