Satellite L300-217 - recovery disk cannot complete installation

Blue screen appeared after having a few problems. I tried to reload the factory settings that did not work, so I ordered the Toshiba recovery media. After following the instructions that it seemed finally said to wait while windows was installed, after a few minutes this appaears:
"Windows can complete the installation. Restart the installation '

I tried this 6 or 7 times now and I do not get the case. I would be really grateful for assistance if possble.

Thank you
Kiki :)

Advertisement

Hey,.

Before you start a lengthy discussion, can you install Windows from a normal disk of Microsoft? Just to test if it s a bad hardware work or not.

See you soon

Tags: Toshiba

Similar Questions

  • Satellite L300-147 recovery disk problem

    Okay, so I lost all of my drives for my laptop (story tl; dw) and then it dies. I have order a new Toshiba Recovery disk image and start running repairs to it.

    Pull upward, press F12, select CD/DVD from the Start Menu and press ENTER.
    It gives me a message "Windows loading flies... "and a progress bar.
    Progress bar ends, clears the screen, there are about 30 seconds of animation 'The thought of Microsoft Bar', the computer is hard drive/CD drive noises.
    Then...

    Nothing happens.

    For ten minutes, nothing happens.

    Except a piece of my electricity bill is consumed by the white backlit screen.

    All words of advice, support, etc. greatly appreciated.

    Mark

    Hello

    At first, I can say that this recovery disk cannot be used for repairs. You can only use it for the new operating system installation.
    Behavior described is certainly not OK and you should be able to see the menu with the language options listed.

    What you can do?
    I'm scared of m not big thing. BIOS setting to default and try several times to see if you're lucky and the installation of recovery will be properly implemented.
    For testing purposes, you can try to get the Microsoft installation disc and see if the installation of the operating system starts correctly.

  • Satellite L300 - product recovery disk hangs on step 2 of the installation program

    The product recovery disk will not work, it hangs on step 2 of the installation program.

    Help appreciated

    Hello

    Do you mean you cannot create the recovery disk or do you mean that you cannot complete the installation of recovery procedure?

    If you can not finish to create the recovery disk, then you must test different drives from different manufacturers. In most cases, this helps

    I m with Verbatim DVD-R

  • Satellite L300-215 - recovery disk could not be installed on this hardware

    Hi, after running fine for several months I stopped my laptop recently and when I went to start upward again it tells me that there is an error with Windows and was to be the center of repair.

    After four hours of waiting and get no - where I decided to use the recovery discs, I had the last time I sent him away. After installing all the necessary components it then tells me it was installing Windows. After doing this for ten minutes, I got a pop up block telling me that "Windows cannot be installed on this material. After it closes and I restarted, he told me the same message and suggest I reinstall so I tried the process and it ended in the same result.

    What is the problem?

    Hello

    I m wondering... I never heard of such an issue.
    If I understand you correctly, you have received the Toshiba recovery disks or have you created yourself?

    Maybe the recovery discs are not designed for this type of laptop
    If you can test it with a disc of Microsoft you should do. Maybe it will work.

    In addition, it would be interesting to know if the motherboard of your laptop was exchanged prior. Theoretically, this could happen missing DMI information. In this case an authorized service provider can help you. :)

  • How Formatt Satellite A200 with recovery disk

    People...

    I need help.

    I currently own a Satellite A200 and I contain the recovery disc. I have 2 hard drives, 1 with vista, 1 with all the stuff not install as a music. I want to formatt the discs with the recovery disk. I formatted the C drive with vista before, but I don't remember how once again.

    I booted up the laptop with the recovery disk, eventually the mode of repair of the system... but what's the next step? I have to formatt and get the stuff to fabric settings.

    Please help me

    When you use recovery disk for the installation of operating system of the first HARD drive will be formatted completely. This means that all partitions and data will be gone. Second HARD drive can be formatted in Vista.

    So now install new OS by using recovery image.
    Start your laptop and press F12 will be bootable devices
    Place the recovery media in the optical disc drive
    In the list, select CD/DVD and press ENTER
    Follow the menu on the screen (for the most part, you must press button NEXT)

    When the facilities of the OS is finished and you can start Vista, type Windows Explorer (combination WIN + e. click with the right button of the mouse on the second HARD drive and select Format...

    All that s!

  • Re: Can I use the other Satellite U400 series recovery disk

    I have Toshiba Satellite U400 121. My recovery disk does not work may be due the scratches that I see in it. I took the laptop to the Toshiba Center service and I got a negative support of them. They said, they can't put the Windows Vista because the recovery disk is not there, and they have put Windows XP inside and handed to me.
    later I got to know that Windows Xp is not Geninue one. :|

    I can still see one of the Partition 'D:' with folder HDDRecovery inside.

    So can I use Recovery Disk of all PC model Toshiba laptop other than the Toshiba Satellite U400 121 recovery disk.

    In fact, I tried with the other model recovery disk, that at boot with this disk, Recovery Wizard starts up, but since I'm not sure about this one I stopped there and brought out.

    Please one of you let me know if you have valuable contributions on this.

    suggestions are welcome!

    Thanks in advance.
    wassim :)

    Post edited by: Mikael

    Hello

    I don't know Mr. which series Satellite U400-121, it is, but you must use the recovery disc designed specifically for this series of laptop!

    Another recovery disc cannot be used because the drivers and tools that have been implemented in the image of Toshiba are not designed for this series of laptop!

    By the way; You can order the CD from recovery from here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Good bye

  • Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) (see downloaded the image)

    Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) on the status bar of the installation window. OS: Windows 8.1 system had old version of Firefox, but is no longer in the list programs. There is no file helper.exe manually uninstall any previous version or remnant of an older version, but I don't have folder C:\Program Files (x 86) \Mozilla Firefox to. Thank you.

    Try this:

  • Satellite Pro A60: Recovery disk damaged

    Can someone help me get a new satellite pro A60 recovery disk. My first drive was damaged.
    Thank you
    carol9430

    Hi, Carol Ann,.

    You can get the new partner authorized Service Toshiba recovery disks. You will find them listed on the Toshiba Web Site.

    Kind regards

  • Windows 7 cannot complete installation, halfway, it stops and gives me the message "windows Setup could not configure windows for the hardware on this computer.

    Windows 7 cannot complete installation, halfway, it stops and gives me the message

    "windows Setup could not configure windows to run on a hardware on this computer.

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  • Installation of Satellite P200-144 recovery disk problem

    Model Satellite P200-144 PSPBGE

    Hi all

    Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

    Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

    My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
    Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

    In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

    Try to rename all the letters of potential left to HDD0
    Try to rename all the letters of potential left on HDD1

    Microsoft DiskPart version 6.0.6000

    Copyright (C) 1997-2007 Microsoft Corporation.

    On computer: MINWINPC

    Disk 0 is now the selected disk

    DiskPart succeeded in erasing the disc

    DiskPart succeeded in creating the specified partition

    Partition 1 is now the selected partition

    DiskPart successfully assigned the letter of the drive on the mountpoint.

    100 percent complete

    DiskPart successfully formatted ther volume

    DiskPart succeeded in creating the specified partition

    Partition 2 is now the selected partition

    DiskPart successfully assigned the drive letter or mount point

    100 percent complete

    DiskPart successfully formatted ther volume

    DiskPart marked the current partition as active.

    Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
    RECO-info-imagecount value = 2
    define the RECO-info-partnumber = 1
    RECO-info-numsplit value = 5
    RECO-info-bootindex value = 0

    L ' ImageX for Windows tool

    Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

    Progress: 67% 06:44 minutes

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
    [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

    [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

    [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

    Error image restoration.

    The file or directory is corrupted and unreadable.

    Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

    Is there a reverse this problem?
    My thoughs is that the image is corrupt.

    The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

    Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

    If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

    0844 847 8944

  • Satellite Pro M40 recovery disk install XP on satellite or L300?

    I had a Satellite Pro M40 with XP Pro who died completely (hard drive). I have the recovery disk.

    I now have two laptops more - a satellite and a L300, both with Vista. I want to install XP on one of them (preferably the L300). Is it possible to do using my M40 recovery disk?
    A bit of googling suggests that the differences in the size of the hard disk - may be an obstacle. My M40 40 GB drive, these new drives are much larger.

    Anyone tried this or have any advice?

    It will not work. Before the start of the recovery procedure the laptop will be identified. If the recovery media doesn t code is code on the laptop, the installation will be interrupted.

    M40 MS on L300 recovery no way.

  • Satellite Pro L300 PSLB1A: Recovery disk doesn't work no-error 0xc000000f

    I get error 0xc000000f on restart and if I try the recovery disk I get error error: 10-FC12-0241
    operating system is vista professional and toshiba laptop L300 PSLB1A - 02S 008

    Hello

    You mean that you cannot start the laptop using the Toshiba Recovery disk you created?

    Go into the BIOS and check if the CD/DVD drive is recognized. It should appear on the first page of the BIOS.
    If the CD/DVD drive is not listed, then you should set the compatible SATA mode and must save the changes.
    After this attempt to boot again from the recovery disc.

    I also searched on the Toshiba driver European page for info and found a few details;

    There is an update of firmware for CD/DVD TS-L633A and TS-L633P player.
    This Firmware solves "sometimes not able to writing on DVD + R media'.
    The problem occurs only on DVD + R media, other media type have no problem.

  • Satellite C670D-19th - recovery procedure cannot be completed

    Hello

    I recently bought from recovery disc for my laptop.

    However after the first disc ends it tells me to insert the second medium wich of recovery must contain the next part of the recovery (15535xsp9.swm).

    To bad it does not work and I hope someone has a way to understand it.

    Teun

    Hello

    Problem is that there is nothing you can do about it and it is not possible to force recovery to complete procedure correctly. Either it works or not.
    I guess that something goes wrong with the creation of recovery disks and my opinion is that you should contact Arvato if you order it it and explain the situation. They should send you a new recovery disk.

  • Satellite L300 - error recovery disc creator - disk is scratced or dirty

    Hi all

    I tried to create recovery disks for my L300, but after a 1-2 minutes, the program stops and says: 'Please check if the disc is scratced or dirty, if so, try again with a new disc' error code 0E01B5-26-2A030C00.

    I tried this many times with many different DVD in recent weeks, but this continues to be!

    The machine is old just a few weeks and run Vista family premium advice please as Im stuck.

    Thanks for reading.

    Hi mate

    I think that you have used are simply not fully compatible disks and supported.
    In my case I couldn't t create the recovery because the CD/DVD drive was not able to manage it.

    Is that many CD & DVD discs supports properties and different standards and in many cases, CD/DVD players have a lot of difficulties to manage different disks.
    I think you should just test some DVD-R discs.

    I use DVD-R and was able to create the recovery disk.

  • Satellite L755 - creator Toshiba Recovery disk cannot be used

    I L755 series PSK2YE for 40 days, and I have a problem with the part recovery disk creator. According to me, it lacks something I simply don't have the TRDCLcher.exe in the menu. I uninstalled probably by mistake or so.

    I still have the recovery disk on D: partition.

    Is there a possible way to get this file back then I do drive recovery?

    Kind regards
    Alec

    Hello

    This means that you can start t the creator of disc recovery or what happened exactly?

    Recovery disc creator can t be reinstalled because it s only preinstalled on your laptop. I think that in this case, your only chance is to leave the drive recovery HARD option and reset Windows to the factory settings. With the box settings, you can use the recovery disk creator.

Maybe you are looking for