Satellite L300 - 26K - after update BIOS touchpad no longer works

Hello

as recommended by tempro, I have updated the BIOS to the version 2.1 to 2.2 (windows). After the reboot, incl. touchpad. doesn´t advice working. In the bios, touchpad is enabled in the system, it said unit works correctly. FN/F9 does no effect. Reinstall the synaptics - no effect - drivers still dead.

Satellite L300 - 26K
Using Vista 32-bit home

How can I restore BIOS to 2.1 again? (if I try the V2.1 windows-bios utility he says that it is always installed - so I can't downgrade by this easy way)

Please help - I need my laptop without external mouse (this works)

your

Oliver

Post edited by: enigmo

Hi enigmo,.

I can t imagine this happening due to the update of the BIOS. Have you tried to reinstall Windows using the Toshiba Recovery disk?

This BIOS downgrade is possible only to an authorized service. Technicians can install all versions because they have these special tools to do a downgrade.

On the Toshiba site, you can find a list of them. Just give the guy and ask for it. They will help you! :)

Tags: Toshiba

Similar Questions

  • Satellite L300 (PSLB8E) - after update BIOS no longer start

    Hello..
    Please, help me to overcome this problem.

    I downloaded the latest BIOS for my Satellite L300 PSLB8E. The previous BIOS was 1.90 but I was facing some nework of error so I thought to upgrade the BIOS can help solve. I have download a new BIOS which is the exe 2.10, its installed successfully, and then shut down, but never started again. I tried to start it several times. I tried all the keys. I don't see a power led and two battery light.

    I don't know what to do now. I have a recovery disk but it also does not work. I'm stuck. II had built a bunch of emails to answer that I am lost now.

    Please help me someone.

    Hi dhaval2000in,

    Unfortunately, I think the case is clear: something was wrong because the BIOS update and now your laptop can start t more :(

    The Toshiba Recovery disk will not help you because it doesn't contain any BIOS programs it contains only an image of recovery of Windows with all the drivers and flashing tools.

    In my opinion, please contact an authorized service provider in your country to get rid of it because the guys do reflash ROM. module
    I m that you can clarify this issue with the technicians and then you can use your laptop again :)

  • Satellite L300 - dead after update BIOS!

    Hello!
    I had a problem with Windows XP, so I decided to update the BIOS. After update, I got 3 lines of errors. After the reboot, nothing appears on the scree! I have toke off the power to the battery and the power cable for some time, I had taken only one cable, but still nothing! No beeps, some noise of hard/dvd disc on begging. Can someone advise?

    Thanks in advance!

    Thom

    Hey Buddy,

    It seems that the BIOS is damaged and it must be reflashed to an authorized service provider. This is a delicate procedure so these tools can t be downloaded and are only available for the FSA. On the Toshiba site, you can find a list of all FSA. Simply contact the closest in the country and ask for help. Guys will help you best possible
    However, this forum can help you:
    www.theeldergeek.com/forum/index.php?showtopic=21209

  • Equium A210-1AS - after update BIOS screen no longer works

    I tried to find the same problem but impossible.

    I had to reinstall Windows Vista after mistakes with programs (recovery was useless so install fress was necessary) and everything worked fine. I downloaded all the drivers and updates section of drivers Toshiba, I installed the ATI graphics driver, then update the BIOS.
    While the closed laptop, now when I turn it on, the fan on the works of graphics card, battery, power and load turns on but the screen remains off (not illuminated). I tried an external monitor and the same problem again. As the screen worked fine until the update im guessing its something that the BIOS has done, or the graphics update.

    TOSHIBA SATELLITE A210 - 1AS
    PSAFJE
    -AMD Turion 64 X 2 Dual-Core Mobile Technology TL-58-
    Genuine Windows® Vista® Home Premium edition-
    DVD Super Multi (Double Layer) drive-
    2 048 (1 024 + 1 024) MB of RAM DDR2 (667 MHz)-
    15.4 "TFT display 1280 x 800

    Thanks to all who can help.

    To me, it sounds like the update of the BIOS's not on your laptop. If the BIOS update fails more often than computer start doesn t more you can see anything on the screen but you can hear the fan, etc.

    In any case, you can try this workaround: remove the battery and the AC adapter. Wait an hour and then reconnect the two devices. Now try to start Notepad and hope this works ;)

    If it doesn't work, you should contact the nearest authorized service provider. Technicians can try to reflash the ROM module

    Good luck!

  • Satellite Pro L300: BSOD after updating BIOS

    Hello

    After updating the Bios of the Satellite Pro L300, windows will not start!
    His show the blue screen of death!

    What can I do?

    Hello

    You are able to access the BIOS settings?
    I m not very well why this BSOD appears, but eventually the SATA mode settings have been changed after the BIOS update

    Usually the SATA mode must be on AHCI if the SATA drivers are installed.
    But if the SATA drivers are not included the SATA mode must be set to compatible.

    Please check this!

    In addition, you could set the BIOS default settings and may try to start the computer again.

  • Re: Satellite L300-214 PSLB8E - update Bios broken link

    I had the laptop Toshiba Satellite L300 - 214 PSLB8E.

    Since a few days, I checked the Web from Toshiba site against Bios upgrade and found a new bios, finally, the link is broken. He points to http://support1.toshiba-tro.de/tedd-files2/0/bios-20090430112041.zip; I checked http://support1.toshiba-tro.de/tedd-files2/0/ and couldn't find any close file of that date (30/04/09).

    Can someone indicate something?

    Hi mate

    I found some similar discussions on the broken links to the BIOS update and I think that there is a server problem I think you should try to download the BIOS in the next few days

    See you soon

  • Satellite A210-199 - after updating BIOS only seeing yellow on

    Hi all, help is needed.

    After a BIOS updated with the help of Toshiba TEMPRO laptop Satellite A210-199 stopped working. The updated spent normally, but when it was turned off is more responsible. All this time the yellow indicator Burns power only. In a few minutes a laptop trying overloaded, but has no outside effect and so constantly.

    How is it possible to correct?

    Hello

    Well, it seems that the BIOS update has failed or something else. Maybe the ROM module must be reflashed by a technician of the laptop.

    But you can try this workaround first:
    Remove the battery and the AC adapter and wait an hour. Then reconnect both devices and try to start the laptop.

    If it doesn t work on the Toshiba site, you can search for nearest authorized maintainer:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good luck!

  • Satellite A500-13W - after update BIOS the FN buttons do not work

    Yesterday I updated my Bios of my laptop to 1.50. After that the FN buttons no longer works. Can someone help me? ^ ^

    Sorry for my bad English

    Hello

    You have installed the correct version of the BIOS of your laptop?

    Features of FN buttons are normally not depending on the version of the BIOS. So, you need Toshiba value added Package and utility tools to Support Flash Cards. Then I recommend to reinstall two of them.

    You can download it here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Remove all older versions first. Reboot then install VAP and finally Flash Cards Support utility.

  • Qosmio F50 - after update BIOS Bluetooth does not work anymore

    I need to update BIOS and F50 v 2.20.

    After update Bluetooth stopped working. Bluetooth in the taskbar icon turned red and I couldn't use any bluetooth device. I got my comp. 3 times to factory State, nothing has changed. After that I uninstalled the bluetooth stack, when I re install the installation crashes and now there is no icon in the taskbar and no link in Control Panel.
    I've tried everything.

    Need some professional help. My computer is only 2 months old.
    I am very angry.

    There is a new version of battery available Bluetooth.
    http://APS2.toshiba-tro.de/Bluetooth/?page=download

    But before install you it I recommend to remove the old battery installation BT.
    After removing the battery of BT, reboot the laptop and follow the BT facility.

    Installation should finish correctly and then you can activate using the FN + F8 keys.

    Should work.

  • Satellite Pro L450D - 12 X - pad touchpad no longer works

    My daughter used the laptop earlier, when suddenly the mouse pads and buttons right and left click stopped working.

    I tried to restart and even restore to an earlier time, but nothing he will work again.

    Any ideas what this could be and how it can be sorted?

    Thank you.

    Hello

    Have you checked if the touchpad has not been disabled by mistake using the FN + F9 keys?
    Please check this box.

    In most cases, this tiny option would be to neglect and in most cases, this is the reason why the touchpad does not work.

  • Satellite Pro 4270: after update BIOS CPU speed at 250 MHz

    Welcome.

    I have upgraded the BIOS to version 2.7 (downloaded on toshiba website) in Satellite Pro 4270 and after her, my bus speed decrease to 250 MHz, so now I have Celeron 250 MHz instead of 500 MHz. You have some suggestions? Where can I find the old version of the BIOS in v2.7?
    Thank you

    HI Artur,

    Unfortunately, it is not possible to download an older version of BIOS on yout laptop since the BIOS update procedure is written to test later versions pre-installed and not too write.

    You will need to take your laptop to a Service partner certified to have a previous version of the BIOS re-installed.

    Kind regards

  • Satellite C55 - Has - after update BIOS fan turns faster

    Hello

    I have been informed by Toshiba application this new version of the BIOS is available, I confirmed BIOS and it has been updated. Now I have the problem. Cooling fan runs faster than before and it is very annoying.
    Find old versions of BIOS somewhere and roll back? I didn't need it if it does not work properly.

    Now I have version 1.40. Y at - it a solution for this new version?

    Message was edited: assignment has been translated

    Driver Toshiba UE page provides only the latest version of the BIOS.
    In addition, the BIOS downgrade isn't possible using the update to the BIOS of win-bases.
    To downgrade the BIOS Toshiba unit, you will need to use the traditional method of updating the BIOS that requires a special version of BIOS. It is available only for the authorized service provider.

    On the other hand, it must be a good reason, why the cooling module run faster.
    Perhaps that the cooling method has been improved again BIOS just to make sure that the internal parts would be properly cooled.

    It s just a guess but I think it makes sense

    By the way: after each update of the BIOS, you must load the BIOS default settings and should save the changes. If you haven t done this in the past, it doesn't

  • Satellite L350D - crash after update BIOS?

    Hey all.

    Put windows XP on my Satellite L350D, worked well, has all the drivers etc. and works perfectly. Returned on the toshiba site and saw there is an update of the BIOS for it, then downloaded and says to install. To halfway through she turned off the laptop (thin power supply and had a full battery, so must have been updating).

    Now it will not boot up what so ever. The power light turns on but nothing else works.

    Im guessing that he wiped or corrupted BIOS, is there any fix for this, I can refer to toshiba or am I out of luck?

    Hello

    The failure of the Bios is one of the most painful problem in this forum. Too many discussions on the failure of the bios posted and typical response is to contact the ASP. Read this, may be useful for you

    http://www.theeldergeek.com/forum/index.php?showtopic=21209

  • After updates, access samba no longer works.

    After Windows update has installed a security update: KB2536276, I can't access shares samba (Version 1.9)

    I can access is no longer shared Unix via- or already drives mapped.

    Errors:
    "Year error occurred while reconnecting to <\\name\share>.
    "Microsoft Windows network: the local device name is already in use.
    "The connection has not been restored."

    and

    "The mapped network drive could not be created because the following error has occurred."
    "The specified server cannot perform the requested operation".

    I found that with Samba version 1.9.16(c), the KB2536276 of broken Windows communication with Samba security update.

    The temporary solution was to uninstall the update... the more permanent solution was upgraded to Samba to version 3.x.x

    http://support.Microsoft.com/kb/2536276

  • Touchpad no longer works after update BIOS on Satellite A500-1GL

    Hello world

    I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

    Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
    After that Windows 7 (x 64) started the touchpad no longer works...

    I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

    I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
    But unfortunately it still doesn't.

    Now, I'm out of ideas, can anyone help?
    Is there a chance to get the older version of BIOS to downgrade it?

    Thanks in advance ;)

    Hello

    It seems strange that after update Bios touchpad no longer works.

    > Is there a chance to get the older version of BIOS to downgrade it?

    To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
    The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
    Advice for the future; Do not touch the running system.

    Good luck!

Maybe you are looking for