Satellite L300-29V - failed to initialize for the logon process

Similar Questions

• Failed to initialize for the logon process

  My phone displays the following message when I turn it on (the screen is black, but this message shows): failed to initialize for the logon process
  The interactive logon process initialization has failed.
  For more details, please see the event log.

  Clicking OK doesn't do nothing, the message just keeps reappearing.  I tried stopping and starting Windows up in Mode without failure.  The message appears in Safe Mode, as well.

  Hello berniesun,

  You can give the Startup Repair to try to clear this error. I've included the steps located in the help section on all versions of Windows Vista. If you want to print these instructions for yourself, you can go to help & Support in the Start Menu and type the Startup Repair in the top search box.

  Check back with us and let us know if this solves your problem.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows Vista installation disc:

  1. Insert the installation disc.

  2. Restart your computer.

     Click the button start , click the arrow next to the button lock , then click on restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

     Note

     • If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. Choose your language settings, and then click Next.

  5. Click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  If the Startup Repair tool is an option of recovering preinstalled on your computer:

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

     Click the button start , click the arrow next to the button lock , then click on restart.

  2. Do one of the following:

     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  3. In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).

• Select a keyboard layout, and then click Next.

• Select a user name and password, and then click OK.

• In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

Judd
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Can satellite L300-1BV - I ask Toshiba for the installation CD?

  Hello

  How could I go ask Toshiba for the installation CD? My laptop (L300-1BV) came with the pre-installed operating system, so I can ask them for the CD?
  But I don't know how I'd go to this topic.

  Any advice?

  Hello

  I think you mean the Toshiba recovery disc. Is this correct?

  If yes you can create yourself Toshiba recovery disc. So start the Toshiba recovery disc creator to create this diskette.
  This disc you create operating system preinstalled with all the drivers and tools of Toshiba. It s also called settings factory or let's say the same thing that you started the laptop time first.

  Normally, you get a recovery reminder message and I think that this information could be useful for you:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Satellite L300 - 2 7 - XP drivers for the PCI and WLAN device

  After the installation of the new XP Pro yet, I see in the control panel mising drivers for:

  1. PCI device
  2 Ethernet controller (wireless)

  What drivers I still need to install?

  Thank you
  Giyora

  Hello

  Go to the page of the Toshiba driver and download driver WLan:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Can satellite L300-29V - I roll back to Vista after installing XP?

  Simple question: assuming I made the recovery discs, is it possible to erase Vista, install XP and then re install Vista using recovery disks? The laptop is a Satellite L300-29V.

  A big thank you in advance I can see no clear answer elsewhere.
  John.

  Hello

  If you created the recovery disc, you can do what you want. Why? Very simple: the recovery disk contains an image of the factory settings. This means that the version of Vista pre-installed with all the drivers and tools. It is him you even have started the laptop, the first time.

  You can install XP, Linux or whatever you want. Demarrer start from the recovery disk, follow the instructions on the screen and you go back to Vista.

  I hope this information is useful for you.

  Welcome them

• Error Windows XP Mode: "device failed to initialize for mode video full screen.»

  When I try to run an old MS-DOS application in Windows XP Mode, I get the following error in the system under MS-DOS 16-bit: "the device video failed to initialize for mode full screen.» I use Windows 7 Ultimate x 64 edition.

  The program starts in mode text very well, but when he tries to enter graphics mode, the error message described above results.

  It would seem that the emulation of the video driver in Windows XP Mode isn't quite complete as far as emulation goes. The application is an old one that was written in Borland Pascal 7.0 and used the BGI graphics programming interface. There is no equivalent version of Windows, and I would like to be able to run under Windows 7. He ran under a native install of Windows XP Pro, switch mode full-screen graphic as needed without any problem.

  Is there something that can be done to make it work under Windows XP Mode in Windows 7? The emulator of map graphics of virtual machines may be adjusted/changed somehow to run full-screen graphic mode?

  I had the same problem too, so instead of using the windows mode I downloaded dosbox and the programmaX interface. It's great for running applications in DOS on windows (all versions as far as I know.)

  www.dosbox.com

  its pretty easy to install just choose a directory to install to. Then to install the interface you simply point to the directory where you installed dosbox. When you start the interface (programmaX), there will be a button to the top of the upper part called Assistant. Just click on the wizard button and follow the pages. If you want to create an icon for it in windows just goto tools... create a shortcut, and then click ok when the box is in place. ;)

  Best of all, its all to is free with the exception of pay for you're internet usage.

• Satellite C660 is unable to start for the first time

  I have a Satellite C660 - PSC0AQ-03C019 + 1B194392K

  For the last year laptop worked fine in the last 2 months, however he had a problem starting. The first starting attempt of the day, it does not start, it is consumed on gets in front of splash screens after the cursor flashing in the top left then hold with a blank screen (not the cursor just a low glow).

  Hold down the power button / turn off and turn on again then the computer will start. sometimes (not always), it will ask to start normally or repair.

  The laptop works perfectly in use does not fall out of mistakes. Restarting the laptop works as expected close and turn on/off after 5 minutes works great.

  If the laptop is left for an hour or more, it starts the same as above. turn off and turn on/off the system will start but with boot normally the question.

  He has not indicated in the error logs files

  I did a full reinstall of HARD drive recovery system.
  I did a full system reinstall from recovery DVDs.
  I did a full system reinstall from DVD disk a hard new recovery.
  I replaced the ram

  I tried to update the bios, but get an error
  BIOS version more than 200
  Battery capacity over 10%
  AC is attached

  Hello

  The description of your problem is, for me, quite confusing, and I do not understand your problem.
  Can your notebook load and start the preinstalled operating system or not?

  Enter the BIOS and set it to default settings. After that restart your laptop and to describe what is happening exactly.

• Satellite L300-1BW - Vista cannot initialize properly

  Daughter has started nine laptop Satellite L300-1BW and can t use the laptop as their was a problem
  I need help to fix it.

  Windows Vista won t even not start. I put t know what is the problem.
  Diagnostics, he said that it s a root problem.

  Any help?

  Result of successful complete event log diagnosis
  error code = 0 x 0 time = 78 mins test internal State
  Code of erro chk full result sauce time = 0 x 0 = 31 mins
  Test test res com sauce eror code boot state = 0 x 0 time = 47 mins
  installation state chk com test result = 0x0 time = 452 mins
  found root cause failure current seup
  syastem details session disc = \device\ harddisk0 repertoire_windows = c:\windows autochk run = 0 root causes of num = 1 chk test updates comp error code from success = 0x0 time = 0 ms test disk diagnostic comp sucsees eror failure code = 0x0 time 94

  Root cause found - failure while playing.
  Also the Vista laptop, is a Toshiba Satellite L300-1BW 415,4 base all Toshiba more round, loading of innovation.

  Any help would be appreciated if anyone knows how to solve this problem and it didn t come with a Vista disk or recovery

  Thanks celticman

  Try the laptop from the recovery of HARD drive partition recovery.
  Do you know how to start this process? Isn't it?

  Immediately after the laptop has been turned on, press the F8 key.
  Then choose the first option called fix my computer
  Then choose recovery Toshiba (last option in a new window)
  Now the HARD drive should products.

  I think this should help you reinstall the Win Vista again and finally the installation of Vista successfully

  Good bye

• The driver \Driver\AFAmgt failed to load for the device USBSTOR

  Hardware: Dell PowerEdge R515, AMD Opteron processor

  OS: Windows Server 2008 R2 (64-bit)
  Peripheral USB do not work properly.  Manager devices displays the following error:
  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
  The observer of events displays the following error has occurred when I plugged the USB key:
  Error in kernel-Pnp, event ID 219
  The driver \Driver\AFAmgt failed to load for the device \Disk&Ven_SanDisk&Prod_Cruzer&Rev_1.02\2006077523163E6032E3&0 USBSTOR.
  Dell recommended running the following updates:

  1 HLDS DP10N external USB DVD Firmware Version A102, A02, published 06/03/12, hard drive option: http://downloads.dell.com/FOLDER98923M/11/HLDS_DP10N-EXTERNAL-USB-DVD-_A02_R318499.exe

  2 AMD SP5100 South Bridge Driver, Version 5.10.10, A00, published 10-22-2010, recommended Windows 2003 x 32 / x 64: http://ftp.us.dell.com/chipset/AMD_SP5100-SOUTH-BRIDGE_A00R262335.EXE (this one may or may not work, initially, the driver is for Server 2003 and I'm not 100% sure if they added 2008 R2 compatibility.)

  3 TEAC DV - 28 s-W 12.7 tray SATA 8 x DVD - ROM Firmware, Version R.2B, A01, published on 26/07/11, recommended problem resolves under RHEL 5 and 6 of RHEL which can cause the Machine error check on PowerEdge server platforms.  Windows & Dos: http://ftp.us.dell.com/rmsd/TEAC_DV-28S-W-12-7-TRAY-SATA_A01_R309483.exe (this one is one I think will do the most good.)

  Any other suggestions?

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. an error message will appear saying "need help."

  I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. a pop error message saying "we met the following problems Installer failed to initialize. "Please download Adobe Support Advisor to detect the problem" I click on 'Get Adobe Support Advisor' and then I get here. Can you help me? I use the Mac operating system. I also run Adobe Photoshop CS6 unistall and cleaner, but now when I try to install it again it gives the same message

  Hi Ashish,

  Please follow the solution 2 in the link below.

  Error: "unable to install". Creative cloud office

  After that, you can install the application by following the instructions on the link below.

  Download and install Adobe Creative Cloud apps

  Hope this will solve your problem.

  Kind regards

  Hervé Khare

• The logon process failed to show safety and connection options when ctrl alt delete is pressed.

  Original title: nothing just won't even ctrl alt del

  When I start my laptop, windows 7, I think that 64 - bit and it starts normally but after a second, I can't click anything on my taskbar and I can click on the Start button but nothing in it. I can't right click on the toolbar to start the Task Manager or press ctrl shift esc. When I press ctrl alt del, it will take a few seconds to load then the screen will go black and say that the logon process failed disppay of safety and connection options when ctrl alt delete is pressed. When I click on one of the icons on my desktop, there was the circle of rotation as if his tent but then going to give up. The problem started a few days ago and I did a system restore to 2 days before it happened and it changed nothing. I have avast and found no virus and I had a legitimate registry cleaner/Fixer and ran both in safe mode and found about 360 registry errors and starts normally again and the same problem persists. If you need more information to help me I will give it to you.

  Hi Sheriff.

  Thanks for posting your question in the Microsoft Community.

  As you have tired almost all the possible troubleshooting steps and the issue can be generated if there is a corrupted user account.

  . Did you recent hardware or software changes to your computer before the show?

  I suggest you to check the question in the new user account.

  Follow the steps in the link.

  Create a user account:

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  If everything works well in the new user account, then I suggest you to transfer data and settings to the fixed aid corrupt the link profile.

  Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I also suggest you to check the error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. click Start.
  b b.. in the search box, type eventvwr.msc and press enter.
  c. click the Application in the observer of events (local).
  d. Locate the event log on the right side of the event viewer window.

  Reference:

   

  Open Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)? :

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• save an image in an image file and reloaded on another computer for the image processing

  Hello

  Can I save the image to an image file and then reload the file on another computer for the image processing? What type of image format should I save for it? Is there any loss of image if I do this? The machine with the camera sits in our lab, and I want to test the software on my own computer image processing. So can someone give some good ideas on this. Thank you

  Jane

  I assume you have the module development VDM and vision acquisition software going TO on your computer.

  So just use playback IMAQ and IMAQ save functions. BMP, png are good for losless save unlike jpg and jpeg2000.

  Hope this helps

• Issue of permanent withdrawal for the background process

  Dear all,

  Oracle DB Version: 11.2.0.3

  Version of the OS: RHEL 5.10

  We have the below listed (with the exception of the mandatory process) background process when querying using the command "ps" on the DB server:

  ora_e006_SID
  ora_w001_SID
  ora_smco_SID
  ora_e007_SID
  ora_e008_SID
  ora_j000_SID
  ora_j001_SID
  ora_qmnc_SID
  ora_cjq0_SID
  ora_emnc_SID
  ora_q000_SID
  ora_q001_SID
  ora_e000_SID
  ora_e001_SID
  ora_e002_SID
  ora_e003_SID
  ora_e004_SID
  ora_e005_SID
  

  Whenever we're tyring to stop the database, he's waiting for active sessions. I predict the cause are treated the foregoing that delay the restart. I also predict that these background processes are releated to Oracle Streams. Can someone help me remove all background processes above? Can I permanently a solution? I've traveled to several sites but could not find the exact solution I'm looking for.

  SQL> show parameter aq
  
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  aq_tm_processes                      integer     1
  
  

  Above is the setting for the QA process.  Thanks in advance for the help.

  Kind regards

  Imran Khan

  This is resolved. It was a bug in 11.2.0.3. Raise SR Oracle and got the one-time patch. Applied and since then, it is not question at all.

  Thank you

  Imran Khan

• How to set the date limit for the whole process

  How to configure dynamically.
  For example, the date limit is different in each case and can be defined by a user so changed in the middle.
  
  Published by: YE may 6, 2009 18:09

  The deadline for the whole process is determined by what you set the variable preset 'deadline '. This interval can be set inside the process as soon as the activity to Begin.

  To set differently for different instances use a time interval variable or a parameter of the company. Here is an example. You have different levels (SLA) different service level agreements in the category of customers. Platinum level customers are 2 days, gold-level clients are 4 customer days silver are six days. In a method, you then have the logic:

  if customer.level = "Platinum" then
      // DEADLINE_HOURS_PLATINUM is an integer Business Parameter set initially to 2 days
      deadline = 'now'.addHours(i : DEADLINE_HOURS_PLATINUM)
  elseif customer.level = "Gold" then
      deadline = 'now'.addHours(i : DEADLINE_HOURS_GOLD)
  elseif customer.level = "Silver" then
      deadline = 'now'.addHours(i : DEADLINE_HOURS_SILVER)
  else
      // no deadline for the process
      deadline = null
  end
  

  If make you a business setting, a business owner could change later ALS a developer need to change the process and by redeploying the it.

  If you want to use an instance time interval variable instead to do this, the logic would be just:

  deadline = 'now' + someTimeIntervalVariable
  

  Hope this helps,
  Dan

• After the system is booted, the logon process takes 20-30 minutes.

  Microsoft Windows Vista Business SP2 [Version 6.0.6002] / ThinkPad x 301 2776 - A23
  The problem was discovered in November-December 2013.
  After the system is booted, the logon process takes 20-30 minutes (the mouse cursor on the black screen).
  I faced the same behavior in "windows boot" mode when Kaspersky Anti-virus is also uninstalled.
  After 30 minutes, as soon as it was possible to run msconfig, I checked and made sure only microsoft services are running.

  Dear Carlos, thank you very much for the help! The problem was solved by executing the steps suggested in this discussion. Please close this message.