Satellite L300 - 2CL - built in mic has stopped working
Hello
When I bought this computer (sep-09) everything worked fine. Then in March (I hade it idle for some time), my built in mic has stopped working.
What eles is fina, and I scanned the Web for solutions and tried to install the new drivers, unistall them, all possible boots, disabel and restart, but at most I just get a static sound of my recordings of test.
I use win 7 home pre, but the problems started when I was with Vista. Now, I am of ideas, and my friends on Skype develops enough not to hear me.
Is that what I can do to get the microphone working, or should I buy a headset?
Grateful for help
Hugo
Hi mate
To be honest, I would use a helmet because helmet still provides a better speak of quality.
But the internal MIC is part of the webcam and the microphone is controlled by the software of webcam too.
Please launch the webcam software and go to settings.
Then, choose Audio tab.
Here, you must increase the volume to maximum.
Welcome them
Tags: Toshiba
Similar Questions
-
Satellite L300-1AQ - Bluetooth tray application has stopped working
When I put my laptop it comes up with an error that says:
* bluetooth tray application has stopped working *.
A problem has caused the problem to stop working correctly.
Windows will close the program and notify you if a solution is available.Anyone who has a solution?
The laptop is a Satellite L300 - 1AQ
Didn't it monthly!Please help, thanks
XX
Hello
Have you tried to reinstall the battery Toshiba BT?
Usually, this will help you get rid of this error message.
Here you can download the new BT stack:
http://APS2.toshiba-tro.de/Bluetooth/First remove the old BT of the system software and after restarting again install the BT downloaded from the Toshiba BT page.
Good bye
-
Built in mic has stopped working on my Satellite Pro T130
Dear Forum,
the microphone of my Satellite Pro T130 15F stopped working a couple of days at a time.
It captures the white noise.
But he responds only to knock on the place where it is located next to the built-in webcam. It does not pick up normal voice or cry out to him...Can't bring any changes to the software that could influence.
What I've done so far: deleted drivers, installed new, updated all Toshiba Software and downloaded and run all the stuff suggested to this problem.
And of course, it is not set to mute or upgraded to the bottom.Still no cure.
What's next?Thanks much adavance.
Hmmm, it makes a static noise? Kinda sounds like hardware related issue
But check the microphone settings in the control panel-> sound-> recording tab
Here, you should see two entries; internal microphone and external microphone port.
The internal microphone must be turned on!In addition, the internal mic belongs to the webcam. In the assistant webcam-> settings-> audio tab, you can increase the maximum microphone volume.
Check this box -
Satellite A350-20s - built-in microphone has stopped working
Hello
I was wondering if someone could help me? My mic has suddenly stopped working. I was away for two weeks and when I tried to use the microphone it no longer works. It was working perfectly before.
When I go into Control Panel and watch settings for the microphone, he said his assets. I also installed the volume on the microphone and checked if everything is muted. But as far as I could see everything fine.
If I test the microphone the sound bar still gray and the microphone is not any sound recording. I tried a few of the instructions I found online, but nothing helped.
I mainly use the microphone on web with Skype calls.It is a very frustrating problem. I hope someone can help me. Thanks in advance.
Hello
The built-in microphone is the webcam and is a part of it. Which means it would be recommended to reinstall the driver for the webcam. You can download the driver for the webcam on Toshiba website for your laptop.
Can send you additional information about your operating system? You use the preinstalled operating system from Toshiba or did you do your own installation of Windows?
-
Satellite M50D-A-10W - display driver has stopped working while gaming
Hey guys I just bought a toshiba Satellite M50D-A-10W and I have a very annoying problem...
When I play in dota 2 sometimes I get a massage like: "display driver has stopped working" or answerI remember exactly, and the freezing of the game and then screen I need leave the game and reconect. If you can help me guys, I'll be very grateful
Rare Hi
This message is certainly created by the installed graphic card driver.
I can't say for sure why this happens, but I recommend you to reinstall the graphics driver.
In most cases, this should fix problems with gambling.Greetings
-
Satellite A200 - 23K - Excel and Word has stopped working
Hello!
I have a problem on my Toshiba Satellite A200 - 23 k. I installed windows 7 and office 2010. I have a problem whenever I try to run excel or word it stop working. It shows who has stopped working the window.
Maybe someone had the same problem and knows a solution? Thank you in advance. Waiting for answer
Hey Buddy,
As far as I know Office 2010 isn't on the market yet and he s only available beta version.
You must choose an official version of the office such as Office 2007 or 2003. Both versions work well and most of the problems he's already resolved.
-
Satellite A300D - upgrade Vista - "Setup.exe has stopped working".
Hello
I use Satellite A300D with Vista and I tried to upgrade to Windows 7 using Toshiba upgrader.
After the language selection and proceed to the other steps, it asks me to uninstall a bunch of programs. Some are uninstalled very well, but when it comes to four other programs he says "Setup.exe has stopped working" and it does not uninstall.
I tried to uninstall the manually, but I got the same message.
These programs are;
Setup driver Atheros
Toshiba hardware configuration
Toshiba supervisor password
Realtek High Definition Audio DriverSo I can't go ahead with the upgrade.
Anyone know what could be the problem?
Thanks in advance,
Pouvez - TR
.Hello
Anyboday tried to run the upgrade as an administrator? Therefore, click on the setup.exe file on the upgrade disc and run it as an administrator.
Moreover I also upgraded from Vista to Windows 7, but in the manual supplied with the notebook, I founded the information, that it s to start the upgrade directly after a new installation of recovery.
If you did a recovery facility before the upgrade?
Welcome them
-
Satellite X 205-SLI1 - VGA fand has stopped working
The VGA fan on my laptop has stopped working and I could not find one another other than States.
Anyone know if its possible to buy a new fan for this laptop at the United Kingdom?You must go to an ASP and request a quote for an original Toshiba fan. The fan is not a common design, so it would be difficult to find a compatible generic.
-
Satellite A300 webcam problem - CEC_MAIN.exe has stopped working
Hello
I have problem when I open my webcam Ii see this message:
+ Cec_main.exe has stopped working.http://www.assayyarat.com/MyImages/Sep08/bloool_Untitled.jpg
Can someone help me?
I m wondering how someone can help you if you n t post something on your laptop and installed OS?
Just for the note; Have you tried to reinstall the webcam software?
Maybe you should try this instead of waiting and waiting and waiting -
Logitech USB headset mic has stopped working
Windows 7 - headset stopped working suddenly
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
About 5 days ago my Logitech USB headset microphone has stopped working. The helmet always plays the sound, but the microphone is not input all the sounds.
Things I've done:
-Uninstalled / reinstalled the Driver Headset, USB Drivers, & sound card driver.
-helmet I tried on another pc (it worked)
-tried headphones different USB on my machine (a no exit worked / entry)
-tried headphones with input jack then the sound card. (has no output worked / entry)
-bought a new sound card and used the headset with Sockets (has no output worked / entry)
-tried all the possible configurations of devices of entry & exits in my sound options (nothing worked)
-Re-enabled the sound card integrated and connected only (output worked / entry has no)
1 odd thing happens. If I smack physically the pc microphone picks up which leads me to believe that somewhere the sound is just set really low rather than not working do not at all even if I turned upwards never slider that I can find to max volume. I get no error. Nothing has changed recently with my pc.
Technical support of Logitech said simply that my 500 DSP is no longer supported in the version of Windows 7 SP1. Logitech provides no drivers, etc except through Microsoft. Microsoft web site shows incompatible.
But after going through Control Panel/convenience store, he started working for the micro and headphones. Hooray! -
Satellite A300-243 - keyboard and touchpad has stopped working
Hello everyone
I have a serious problem in my Satellite A300-243. I installed a driver for external keyboard using a CD and once I rebooted both keyboard and touchbpad stopped working and to make any order, when I reached the vista welcome page.
What should I do because you know that even if I can't get into the windows to uninstall this driver.Any way to do during windows startup?
Hello
Why you installed a driver for external keyboard? I've never heard of such drivers
Anyway, you should try to start in safe mode and then you are able to remove driver external keyboard to the list of software. After I restarted in normal mode, the keyboard and the touchpad should work properly again.
-
My Satellite L755 HDMI - output 16 M has stopped working
Hello!
I have been for long the my Satellite L755 HDMI connection to a TV, but a few days ago it stopped working. The laptop detects the TV and identifies it as Samsung, but there is no signal on the TV screen.
Outputs HDMI to the TV and cable are ok because I can run other devices. Tried to activate HDMI thanks to push "FN" + "F5" key (I choose the TV screen), changed the resolution, updated Nvidia drivers, nothing works. My OS is Win7 64.
I know that the only signal is seen on TV, the screen is when I restart the computer; the I can see on the image on the screen of the TV for a few seconds (while "starting windows" is displayed) and not good image, with lots of red vertical lines on the screen. After a few seconds, no signal again on the TV screen
Can anyone help? Maybe it's a hardware failure?
The laptop is no longer under warranty.Thank you.
Hello
It is not easy to say what may be wrong with that. I think that it will help much, but have you tested the feature with different HDMI ports on the TV?
Have you tried to roll back the OS (System Restore) to an earlier time when everything was OK?On this virtual path, that it is not possible to provide the diagnostic but ultimate test right, you can do if you reinstall OS using original recovery image and test in functionality with the factory settings.
What do you think of all this?
-
Satellite P300-156: CD/DVD player has stopped working
Hi people,
I have a P300-156 and since I bought it, I had a problem with the DVD recorder... ok I know I should take that back!
Sometimes when I press the eject button, that nothing is happening outside the orange light flashes and continues to blink. When this happens that I lose the drive in my computer and the only way to make it work again is to restart the laptop.
Usually, it works when I reboot then stops working, but it doesn't also sometimes from the restart.
Someone at - it ideas.
Thank you
Dan
Hello!
Have you looked on the Toshiba site for an update of the firmware? Search on the Toshiba site for an update, maybe this will solve your problem.
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversHowever, I think it could also be a hardware problem that your drive is defective. Then I'd go to a local ASP. A technician can check your laptop.
Good bye
-
Satellite P205D-S7802 - LAN and WLan has stopped working
Hey all,.
My problem is that all of a sudden all my network interfaces have stopped working. I don't think that my operating system is the problem because I run linux as well as windows and it does not work in any of the 2. Both my local network and my wireless lan doesn't work, please help.
It's really rare that two devices; LAN and WLan stopped working and in Linux or Windows, you can use these cards.
In my opinion, your laptop is OK, but I think that your router to malfunction.
It would be the most simple and plausible explanation.
Did you check the configuration of the router?
-
BlackBerry Smartphones Bluetooth mic has stopped working
I have a Blackberry Pearl 8220 phone. I had paired bluetooth etc. successfully and have used for months before. All of a sudden micro Bluetooth stopped working. The caller on the other end cannot hear me. I am able to hear fine appellant.
It is certainly a problem with the phone because I tried two bluetooth headsets. Two of them showed the same symptom with Blackberry but worked on other phones. Hoping someone thre can help.With the help of BlackBerry 8220
platform v4.6.0.293 4.1.0.100
Tried to do a battery pull several times
Improved using the bb Desktop Manager software
have, check the other threads on this forum. The 8220 simply comes with a defective bluetooth chip and he dies everyone before too long. I hope that your phone is still under warranty with T-Mobile, because it's the only way to get this problem RIM on you fixed. If you don't have T-Mobile, RIM is not concerned. Even if everyone speaks in even on their own forums, they have not even acknowledged that this is a widespread problem.
Maybe you are looking for
-
With persistence locks function keys!
Hello I would like with persistence of lock function to my laptop E531 keys. I know that you can switch between the multimedia and function keys by setting FnLock (Fn + ESC), but unfortunately, this setting is volatile: whenever I restart the system
-
just bought this mac book. How can I get my music and photos on this camera
I just bought this mac book. How can I get my music library and photo in this device
-
I have auto collage and the preview screen shows black no pictures
I just brought automatic collage but when I finished the preview shows empty screens there is no images
-
[BB10] jQuery click() does not work
Hello I have a big problem with jQuery on WebWorks: Description and when I click on the item 'option hand' in the emulator Ripple , div "moreTrans" did not hide... Of course jQuery is added to the application properly, because code: hide the div to '
-
Change of address IP UCS Central
Hello Anyone know if it is supported? Thank you very much