Satellite L300 - after installing XP it does not find the WiFi router

After insatlling XP SP1 and insatlling a lot of everything except drivers WLAN works. I installed the drivers and I install Atheros to manage my connections, but it seems not yet to find the wifi router.

I use toshiba satellite l300 pslbce.
PS! I had the laptop that works on Ubuntu berfore, worked well.

Hello

Have you updated XP SP2 or SP3? I m wondering that you only use the SP1 and you need to update. SP2 or later is required for some pilot applications and software.

And where did you downloaded the Atheros driver? You must use the driver from the Web from Toshiba site. The portal of WLAN, you can find the latest drivers:
http://APS2.toshiba-tro.de/WLAN/

Welcome them

Tags: Toshiba

Similar Questions

  • Laptop does not find the wifi network

    It's probably a bit of a stupid question, but I guess I'll ask in all cases... What should I do to my laptop, if not to find a wi - fi network you want to connect to? When I get the help, I thought that an ethernet cable is unplugged, but my other laptop is to find a network very well, so why not this particular laptop?

    Seems to me that you have not installed the drivers for your wireless network card.

    Try to go to the Dell support site - below is the link to the drivers for your laptop special.
    If this does not work somewhere on your laptop (below) be a sticker with a "service tag" will enter this on the Dell site and it will connect you to the drivers you need.

    Look at the link below and download the driver for the card relevant wireless in the category 'Network' - unfortunately I do not know who it will be exactly so some trial and error may be needed.

    Dell link: http://www.dell.com/support/home/uk/en/ukbsdt1/product-support/product/inspiron-15-3521/drivers

    Judging by the result of your device manager that you may need to install some other drivers on the Dell site. Ideally, you should have no device showing that they need a driver.

  • Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

    * + Hello + *.

    I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
    Already everything works because I had a compilation of drivers copy of the past.

    The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

    So I tried with the power that said safety program to:

    Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
    And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
    Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

    So, how to control the peripheral power turn off on?

    Bq. * + thanks for your attention and patient. + *

    Hello

    Firstly the Toshiba Power Saver requires the installation of the common Module.
    The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

    So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

    In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
    Is the laptop supports the Intel wireless network adapter?

    AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
    Check it!

  • After installing SP2 NIC does not

    Hello

    Windows server 2003 with SP1 WIRELESS speed of 10 Mbps. After installing SP2 NIC does not.

    Ravi

    Hello and welcome to the community of VMware.

    You have installed VMware tools on this comments?

  • I try to install OBIEE 11 g 11.1.1.7.0, but it does not find the Webogic server already installed on the computer.

    Hello

    I have installed:

    -(Oracle Linux) OL 6.6

    121 GB HD

    5.0 GB RAM

    -JDK-7u80-EA-bin-b05-Linux-x64-20_jan_2015.tar.gz (Java)

    -Fmw_12.1.3.0.0_infrastructure.jar (infrastructure)

    -Fmw_12.1.3.0.0_ohs_linux64.bin (SST)

    I try to install OBIEE (Oracle Business Intelligence, c. 11.1.1.7.0), I unzip these files:

    -bi_linux_x86_111170_64_disk1_1of2.zip

    -bi_linux_x86_111170_64_disk1_2of2.zip

    -bi_linux_x86_111170_64_disk2_1of2.zip

    -bi_linux_x86_111170_64_disk2_2of2.zip

    -bi_linux_x86_111170_64_disk3.zip

    I try to install OBIEE 11 g 11.1.1.7.0, but it does not find the Webogic server already installed on the computer.

    I run:

    / Home/Oracle/OBIEE/Disk1/RunInstaller

    I checked the option "install the software only:

    foto1.png

    I select the 'Home Oracle Middleware' directory:

    / Home/Oracle/Oracle/middleware

    foto2.png

    On the next screen does not appear that there is a weblogic Server installed on the machine, but it exists and works on:

    / Home/Oracle/Oracle/middleware/Oracle_Home/wlserver

    foto3.png

    What can be?

    According to the matrix certification > it seems http://www.oracle.com/technetwork/middleware/bi/bi-11gr1certmatrix-ps6-1928219.xls , OBIEE 11.1.1.7 is not certified with Weblogic 12 c... Take a look at the roadmap "Web and application server interfonctionnements" of the matrix.

    If you want to install the software only, then I think you should use a version of certified weblogic as 10.3.6 and repeat prior steps. The installation wizard should be able to detect your installation of weblogic 10.3.6.

    Kind regards

    White

  • Dell Vostro 430 sometimes breaks down and does not find the hard drive in the bios

    So I have this old - ish Dell Vostro 430, intel cpu, windows 7 hard disk sata 250 GB, 4 GB of ram.

    Update BIOS to the latest version 2.4.0

    In certain exceptional circumstances, this PC sometimes crashes in windows, it is restarted, and then when he comes back it does not find the hard drive as a gift. He is not seen in the bios and does not start.

    To fix, I have to unplug the power cable, wait a few seconds, plug in, reboot the computer and it starts normally, load windows and everything.

    So far, I have tried to paginate on another hard disk, reinstall the Windows operating system from scratch, and same thing happens from time to time.

    It is difficult to find the cause of the problem, because this happens very rarely.

    Sometimes, when the pc is turned on for the first time in the morning, the hard drive is not found by the bios and we reappear at the same trick (disconnect the power cable) to take him back.

    When it crashes when using inside Windows, it seems that the reason is the computer can't find the hard drive.

    Such computer is out of warranty.

    It would be nice to just throw this computer because it is still fine for the work it has to do, + I have Windows and Office OEM license on it, as well as many other software that I have to reinstall etc.etc.

    No idea what I could troubleshoot?

    Maybe change the motherboard? How can I buy a new motherboard for an out of warranty Dell?

    While possibly keeping all the OEM licenses (Windows 7 and Office 2007).

    Desu
    .. .once in a while...

    That will make hard to resolve this situation.

    • Have you tried to replace the battery in the motherboard, if nothing else than to exclude it? CR2032, 3-volt lithium-ion, ~ $2 at discount stores. Do not forget to open the BIOS Setup and copy down all current settings first because remove battery BIOS resets the default values, which is maybe not correct for your specific system.
    • Have you tried another SATA data cable, or reinstall the existing at both ends?
    • Have you reinstall RAM and PCI card in their slots?
    • Have you used canned air to blow out the dust?
    • Maybe a power supply problem... ? If insufficient voltage, he could not start the HARD drive quite fast at startup, or quick enough after your option settings to be able to turn the HARD drive off when it is not accessed, what may cause this error message 'not found '.
    • If you use a power strip or surge protector, have you deleted and the PC connected directly to a wall jack?

    If it is a motherboard defective and you replace it with another jury of Vostro 430, you shouldn't have any problems with Windows or Office licenses. Assuming you are using Windows Dell reinstall for exact same version of Windows drive that was installed at the factory, it should not even ask the product key, if you must reinstall Windows on the HARD drive. But even if she asks, there should be a sticker somewhere on the PC with your unique product key so you can enter if the installer made the request.

    and make sure you have the Office product key too...

  • I can't access firefox, everytime I try I get that windows does not find the file, I tried it redownloading but he still gave me the same message?

    I can't access firefox, everytime I try I get that windows does not find the file, I tried to download again, but he still gave me the same message. the problem has nothing to do with my internet because it freaks on the internet explore and everythign is fine, just my computer can not access firefox for some reason any. I tried uninstallign it and then install again, but that did not work, I tried to install a different version and it still doesn't work.

    yesterday

    User Agent

    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; MSDigitalLocker; FunWebProducts; GTB6; .NET CLR 2.0.50727; InfoPath.2; .NET CLR 1.1.4322; OfficeLiveConnector.1.3; OfficeLivePatch.0.0 .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    I'm sorry, but you have not answered my questions.

    (1) on the last stage Setup lets you start Firefox, if you keep all of the checkbox "Launch Firefox now", turns on Firefox when you click on "Finish"?

    (2) how did you launch Firefox when you receive the error message? How do you 'by clicking on the freshly installed target Firefox.exe?

    (3) what is the exact error message? (Post a screenshot if you cannot re-type precisely). Text you have posted it lacks an ending quotation mark and does not resemble any message I know.

  • Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory.

    Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory. What is that?... and how can I solve this problem?

    Hello

    These methods should help for Windows 7 or Vista.

    References to Vista also apply to Windows 7.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
    Safe Mode account has no default password (so unless someone changed
    the password should be available).

    Some programs such as the Google Updater (if you've added the Google toolbar,
    Chrome or Google Earth) has been known to cause this problem.

    Error message when you log on to a Windows Vista-based or Windows 7
    computer by using a temporary profile: "the user profile Service has no logon.

    Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
    http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have visited
    logged on with a temporary profile. "in Vista & Windows 7.
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    ----------------------------------------------------------------------------------------------------------

    For Windows 7:

    How to enable or disable the built-in Windows 7 Administrator account
    http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

    Use the hidden administrator account to lower your user account APPLY / OK then
    Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
    If necessary after following the above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
    your password even (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the command prompt
    from there if necessary.

    How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    ----------------------------------------------------------------------------------------------------------

    For Vista:

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the hidden administrator account to lower your user account APPLY / OK then
    Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
    If necessary after following the above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
    your password even (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the command prompt
    from there if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    What are the system recovery options in Windows Vista?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    How to create a Vista - free methods recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ---------------------------------------------------------------------------------------------------------

    If you can't access your old account you can still use an Admin to migrate to one
    new (remember to always leave an account Admin who is not used except)
    to test and difficulty).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

    I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

    Now, I get the message:

    "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

    As I understand it, that does not affect really any other files, they rely on the spot (I think), but

    HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

    Thank you!!!

    Try to be...

    SereneJulie

    Hi serene,

    Thanks for posting your query on the Microsoft Community.

    As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

    • Create missing files that are listed in the error message.
    • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
      1. In Control Panel, open backup and restore.
      2. In the section back up , click change settings.
      3. In the dialog box Configure the backup , click Next.
      4. In the dialog box that you want to save , click Let me choose, and then click Next.
      5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
      6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
      7. Click Next, and then click Save settings and exit.
      8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

    If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

    Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

    http://support.Microsoft.com/kb/973455/en-us

    Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

  • Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

    This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?

    Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

    Hello

    You did changes to the computer before the show?

    These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.

    Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
    http://support.Microsoft.com/kb/973455/en-us

    I hope this helps. Let us know if you have other problems with Windows in the future.

  • Windows 7: the search does not find the files that should be, directory is indexed and *.php included on the list of extensions

    Windows 7: search does not find the files that should be. I have indexed directory and *.php included on the list of extensions, but search can't find files for Word searches that I know there are files with these words in them.

    If you're frustrated by research (aka Desktop Search), you are not alone. Click the Start button and type find and click the button 'change the way Windows search'. Now click on the Advanced button and select the tab file types scroll down and find your type of file (in your case .php) and make sure the radio button "index properties and the content of the file" is selected for the file type.

    Out the form by clicking on the OK button, but do not close the form when you click the Advanced button.

    Then, you may need to change the indexing locations. If the folder where your files are located is not known for indexing search, then search is not even bother looking for here (a source of frustration for many users). Maybe your files are located on another drive or partition without the knowledge of the indexing engine. Using the options icon and select/deselect expand, make sure that at least the files of interest are included for the indexed locations. I hope this helps.

    samc1

  • When I want to download the trial version of the CC, creative cloud does not find the file. Always seek

    When I want to download the trial version of the CC, creative cloud does not find the file. Looking, what should I do?

    Hi clemdef,

    Change your browser and try again. Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html for download issues.

    You can even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html .

    Please follow the very important instructions before downloading.

    Kind regards

    Romit Sinha

  • Satellite L300 PSLBGE - Win XP - FN does not work

    Hello!
    I just installed Windows XP (sp3) on a satellite L300 PSLBGE by Toshiba... and the FN key does not work.
    At the moment I have to activate bluetooth... but FN + F8 does not work.

    What can I do? I installed Hotkey, save energy and controls (1.0.0.8)...

    FN still does not work. FN + F3 does not activate the option to sleep...
    FN + F8 does not Bluetooth... FN + F6 and Fn + F7 to control brightness... nothing to do.

    Am I the only one having this problem?
    There is no updated BIOS... and it's very frustrating.
    If I press FN the Green led appears under tension... that there is no problem about the keyboard... What can I do?

    I absolutely have TO activate bluetooth... but if I press Fn + F8 it does not work! I want to read someone who have this laptop and told me "I have your satellite L300 PSLBGE 1 b 1 and my bluetooth and my FN button works with Windows XP!" ... maybe he could help me :)

    Thank you very much
    Tier

    Hello

    You need to install the common Module from the Toshiba European page and the FN keys will work!

    Check this box

  • Satellite L300 - cannot install Vista - HARD drive not detected

    My laptop model is Satellite L300. Model No.: PSLB0E-06U01HAR.

    I am facing problem with Windows Vista Home Basic.
    In the middle of the instalation, it does not detect the hard drive.
    Its shows me the error that is your hard drive erased or not connected the power cable.

    But I installed the operating system like UBUNTU successfully opened.

    Let me know how to solve this problem.

    Thank you

    Did you include the SATA driver?
    If this is not the case, this could be the reason why the HARD drive is not detected.

    However, you can disable the AHCI in the BIOS and it could spend in compatible mode. In this case the SATA driver is not important

  • Satellite L50 - after Win10 touchpad upgrade does not

    Brand-new Satellite L50-C03E laptop pad touch does not work. Upgrade to Windows 10. Tried using all combinations of F5, FN & F5, don't hit to swipe and checking settings and nothing works.

    I guess you can use external USB mouse.
    Connect it to the laptop and uninstall the old touchpad software / driver for Windows 10 system. You should find it in Control Panel → programs and features.

    After the the touchpad driver has been removed, restart the laptop and win 10 updates.

    It would be very interesting to know if this solution allows you to get the touchpad working again.

Maybe you are looking for