Satellite L300 and win 8 - How do I activate the Fn key for touchpad?

Similar Questions

• Satellite Z30 - A - 1-2 - How to re activate the original key

  Hello
  I have Toshiba Satellite Z30 - A - 1 2 and recently my home / end / pg buttons (etc) stopped working.
  When I press the FN key and the House, I get 7.

  The FN key is working o.k. - I can use it to adjust the volume, etc. without any problems.

  I see that there are several options on the same button FN - & 7-7 home
  The 7 and the home button are the colors of FN button - but I can't use it to get the home function to work.

  I tried to change the FN with FN and F11 option - but it did not help.

  Can you help me please?

  Thank you!

  Hello

  What operating system is running and you have the tool button installed Toshiba?

  See you soon

• How can I activate the "Host key" for my sftp to the ISE Server?

  Hello

  I can't copy my files to upgrade 1.2 ISE to my repositories the.

  Here is a cut and paste of my CLI on one of my knots ISE after attemtping to copy from my workstation (running a SFTP server) to one of my nodes of ISE.

  XXX-ise-01 / admin # s copyftp: / //ise-upgradebundle-1.1.x-a-disque 1.2.0.899.i386.tar.gz.:.

  User name: Admin

  Password:

  % ERROR: backup failed due to one of the following reasons

  1 host option key is not configured

  2. the host key is removed due to the new image

  3 host key is removed from any other depositary having same ip/hostname

  % Please reconfigure the host key option

  % Error: transfer not possible

  I don't have whatever it is configured with the option "host key.

  I googled and searched, but cannot find references limited to the "Host key" command within Cisco. I tried various forms of it on the ISE node with no luck.

  I tried an FTP transfer, but it does not work.

  Any ideas?

  You can try to add a repository to your local configuration as an sftp server that should start the process host key.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Can I get a configuration of single language somewhere? How can I find the license key for my installation.

  Original title: single language of windows 8

  I had 8 single language on dell inspiron 15-3521 pre-installed windows. I did repartitioning disks and windows recovery options 8 as 'reset your pc' and "Refresh your pc" has stopped working, saying that the not found recovery partition, but it was intact. I have no recovery disk.

  Can I get a configuration of single language somewhere? How can I find the license key for my installation.

  Hi Mohammed'metwally,.

  Please answer this question to get more clarity on this issue.

  • The application or program that you use the partition of the drive?

  This problem may occur if the partition table is damaged or altered. As a result, the recovery partition does not work. I'm sorry to know that you are facing this problem.

  You will not get the unique language anywhere to download setting. You have an OEM computer that comes with the product key integrated into the BIOS. The product key of Windows 8 on new machines is now integrated in the machine. It uses the Secure Boot technology. When you perform a new installation of Windows 8, the installation program ask a product key and will be automatically get it from your system and proceed with the installation.

  As Windows 8 came pre-installed, you must contact the manufacturer of the computer with this problem for more help.

  http://en.Community.Dell.com/?~CK_=_mn

  Dell technical support: http://www.dell.com/support/contents/us/en/04/category/Contact-Information/Technical-Support?c=us&l=en&s=bsd&cs=04

  Thank you.

• How can I get the license key for the trial app, now that I joined creative cloud?

  How can I get the license key for the trial app, now that I joined creative cloud?

  After trying once again, the registration process has worked and activated my copy of test for me.

• How can I buy the product key for windows 7 Professional 64-bit online

  How can I buy the product key for windows 7 Professional 64-bit online

  http://www.Microsoft.com/Windows/buy/default.aspx
  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  MS Windows 7 store price:
  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102
  Keys are not specific to 32-bit or 64-bit

• How do you activate the mode debugger for xml publisher PeopleSoft

  Hi all

  How do you activate the mode debugger for xml publisher PeopleSoft

  E-BI/XMLP: how to manage BI Publisher/XMLP in Debug Mode/Turn LOGGING reports? [Video] (Doc ID 821195.1)

• How can I find the WEP key for my wireless network so that I can connect to it?

  How can I find the WEP key

  Steps to find a WEP key:

  1. open a browser (the program used to access the internet). The following process worked for me when using the

  Internet Explorer, Firefox and Opera browsers, although I'm not sure it will work for other browsers (for example

  Chrome, Safari etc.).

  2 type the following in the address bar of the browser. If you use a Linksys router type in "192.168.1.1" and if

  using a type of router Belkin "192.168.2.1". The address bar is the area where the Web pages are typed. It is important

  When you enter there is NO http://www. before the numbers.

  3. If everything is is well past that should open a page which says that Linksys or Belkin.

  3. There may be the need of connection. When you use a Linksys if you don't know what are the user name and password, it may

  always be the factory settings and then enter "admin" for the username and "password" for the password. If you are using a

  Belkin router, the factory settings often come without password, click just send without having to type a password.

  4. click on one) "wireless" or b) "settings".

  5. click one) "Wireless security" or b) "wireless settings".

  6. There should be a page with a specified WEP key.

  7 writing it to the down/copy and use as you wish!

• How can I find the product key for a copy of Windows Vista, which has since been upgraded to Windows 7?

  Get a product key lost

  I have Vista Ultimate, upgraded to Windows 7 Home.

  Unfortunately, I lost the product key for Vista installation underlying.
  I used the Belarc, but this shows that the key to upgrade (which I have NOT lost!)
  Is all the same to recover the underlying key to Vista? I bought Vista Home MS directly and they sent the key to a few years back, unfortunately, I have more e-mail either. MS draw their email or pick up the transaction?
  I wan to do a fresh install / clean to a new SSD and this issue is currently prevents me to do.
  see you soon
  Ricky

  Hello

  Unfortunately, the answer does not address the issue.

  Fortunately, MS were able to trace the original transaction and provide me with the key. (The original key has been provided directly by MS by e-mail.)

  concerning

• Satellite X 200-15 k - how can I activate the advanced buffer HARD drive under vista?

  How can I turn on buffer advanced performance HARD drive under vista? This option is not available for this drive?

  * Check this box: *.

  1. right click on the computer in the Start Menu, then select Options.
  2. click on advanced on the left system settings.
  3 select the Hardware tab in the System Properties window.
  4. click on the Device Manager button.
  5 expand disk drives.
  6 right-click on a hard drive under disk drives, and then select Properties.
  7. Select the policies tab in the Properties window for the device.
  8. check Enable advanced performance.
  9. click OK to save the changes and reboot your computer.

  If this is not possible then the buffer of advanced performance is not possible with this HARD drive.

  Hey Buddy

• How can I get the product key for Windows XP? I have is no longer mine.

  I GOT THE CD OF ORIGIN FOR WINDOWS XP HOME EDITION WITH PRODUCT KEY, NOW I DON'T HAVE THE PRODUCT KEY OF FORMATTING IS MADE FOR MY COMPUTER AND IT ASKING PRODUCT KEY

  DEAR SIR.

  I HAD BOUGHT WINDOWS XP HOME OF DIGITAL LIVING ROOM IN BANGALORE (INDIA) 2008-03-18 @10.47 WITH S / N:80043 - 429-709-731 AND I GOT THE PRODUCT ALSO KEY (NOW IT HAS BEEN DAMAGED AND HAS NOT BEEN ABLE READ). ON 3 FEBRUARY, I HAD TO FORMAT THE SYSTEM. AND AGAIN WHEN I WENT TO INSTALL WINDOWS XP IT ASKS MY PRODUCT KEY (WHICH HAS BEEN DAMAGED). I HAD MY ORIGINAL CD. PLEASE HELP ME.

  Hello
  You can check this link:
  How to identify, locate, and replace a product key
  http://support.Microsoft.com/kb/811224
  
  

• How to activate the product key for Windows 8

  * Original title: product ket

  I bought C440 to install the Microsoft product key request, call center does not; machine to say its with windows 8. How to get the product key

  Hi Manon,.

  1. What is the brand and model of the computer?

  2. What is the exact error message?

  If this is an OEM computer, you need to contact the manufacturer of the computer to activate Windows 8.

  How to confirm that the system of Windows 8 is successfully activated

  Please get back to us with the information above to help you accordingly.

• How can I activate the creative cloud for photography on a second computer, that is to say my laptop.

  How can I activate creative cloud for photography on a second computer, my laptop?

  Download cc to your laptop desktop app and use it to install your ps and lr programs, Download Adobe Creative Cloud apps | CC free trial Adobe

• How can I find the product key for microsoft office which is preloaded on my HP TouchSmart PC?

  Trying to replace Office 2003 with Office 2010, which came preloaded on my HP TouchSmart PC, but he keeps invites me for a product key...

  When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

  As a general rule, the Microsoft Office product comes with most HP computers is a trial version or reduced functionality. Unless you paid extra for a version full of Office, it is unlikely that you have or that you will find a valid product key for Office.

  Please send Bravo

• How can I find the network key for my home network?

  I have just purchase a new laptop and access the internet via my home network. The new laptop wonder the network key. Where can I find that on my computer at home?  I had someone else set up the network for me.

  The network key or WEP/WPA key, you should be able to find on your router or access point.  Open your browser and type the IP address of your router to access wireless and search of WEP security or the protection of the network area.  Quite a few routers/access points are configured as 192.168.0.1, that intellectual property then give it a shot in your browser by default.  If it is by default, the name of user/pass is always likely admin/admin or admin and then empty password.

  I hope this helps!