Satellite L300 doesn't start after upgrade memory

Similar Questions

• Equium M50-192 doesn't start after upgrade memory

  Hello

  at the moment I have 2 x 512 MB sticks of memory in my laptop, I bought 2 x 1 GB sticks of mrmemory.co.uk as an upgrade. When I tried to use the computer will not start until I put the original RAM support. State Mrmemory that they sent me the correct memory for my laptop, I have done no matter what wrong?

  Thank you
  Andy.

  Hello

  I think that the modules of memory are not fully compatible or defective
  It's the only plausible explanation why start Notepad doesn t
  As far as I know the laptop can be upgraded up to 2 GB of RAM (2 x 1 GB) and this module should be compatible DDR2-400 and 533 Mhz 1 GB (PA3411U-1M1G)

  PS: Have you tried to update the BIOS by using the old memory modules?
  Check if you are using the latest version of the BIOS if it is up-to-date and check if the new modules would

• Satellite M100 does not start after upgrading memory

  I recently bought two sticks of DDR2 1 GB 533 Mhz RAM memory.
  I placed both in the slots (the one under the keyboard and one at the rear).

  For some reason any when I try to turn the computer back on to, nothing happens.
  The screen is black and nothing seems to load.

  Help please!

  The case is clear like a Crystal;

  The M100 cannot start because memory modules are not fully consistent or both modules or only a single module is defective.

  I put t see any other solution to test for laptop with other modules

• Satellite L300 - will not start after the installation of Skype

  My Toshiba Satellite L300 won't start after installing Skype.
  This happened to someone else, and can I do?

  Thank you.

  I think Skype is probably the most used messenger and ideal application for communication.
  It is professionally designed and programmed. As you know in recent years, it has been offered in many different versions and it is always better and better.

  So I think that Skype itself is probably not the problem. I know that a lot of people also use Skype and I've never heard problem described.

  Anyway, what you can try is to remove Skype and try to install it again. Try also push the BONES at that earlier time. Maybe some Microsoft updates are responsible for the stability of the software.
  It's really not easy to say what the problem is here.

• Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory

  Upgrade memory L50 - A - 1 5 pskk6e

  I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
  memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.

  I tried to mount only the new but it won't start.

  Some ideas?

  I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)

  But why, box for computer laptop doesn t is very simple: the new modules are not compatible.

  I found modules recommended by Toshiba.
  These are:
  8GB DDR3L - 1600 PA5104U-1M8G
  4 GB DDR3L - 1600 PA5104U-1M4G

  Both are made of Kingston and the specifications are:

  Memory speed: 1600 Mhz PC3-12800
  Capacity: 8 GB (1x8GB module)
  Pins: 204 SODIMM
  Type of RAM: DDR3 SODIMM
  Verifying the integrity of data: non ECC
  Specifications:
  Latency (CL) CASES: 11
  Voltage: 1.35v

• Satellite 1410-304 does not start after upgrading memory

  I tried to extend the memory of 512 MB to 1 GB by placing two memory modules in my laptop Satellite 1410-304.
  These blocks of memory are each 512 MB and type: DDR400 PC3200 SODIMM.

  Each memory separate block in one of the memory slots A or B works well, no problems.

  However, when the two blocks of memory are installed, the laptop does not start no more.
  I hear the soft beeps indicating that a problem has occurred. The system works under Windows XP.

  Someone who can tell me how to solve this problem. Thanks in advance for your help

  concerning

  Marten

  Memory sticks are made by the same company? If this isn't the case, it will not work.

• Satellite A200 PSAEOE does not start after upgrading memory

  Hi, I am first time here.

  I bought a Toshiba A200 PSAE0E-03J02JDR with 2 GB of RAM. I bought a pair of ram Corsair (2 * 2 GB VS2GSDS667D2). The computer does not start after that I installed the memory. I have intel 945 chipset, which is capable of 4 GB (manual page 1-2). The bios version is 1.8 2007.

  Can anyone help me, please.

  Post edited by: Marian ovidiu

  Hello

  The A200 series supports different chipsets;
  Intel 945 PM
  Intel 945GM
  Intel 943GML

  As far as I know your laptop supports the * 943GML * Intel chipset and the chipset supports 2 GB RAM max.
  Take a look at your laptop s user manual * Page 18.*

  Summer: 4 GB of RAM are not possible, and therefore your laptop does not start.

• Satellite M30X-122 does not start after upgrading memory

  Hello

  I want to upgrade the RAM in my Satellite M30X 122. Correctly my NB contains 2x256MB.
  I bought a GB 1 333 MHz. Cl2.5 module PC2700 (corresponds to the former, but more grand ;-)))
  Now I build in the module, but after the build-in system is dead.
  It doesn't show anything on the screen (after pressing the button one)).

  Does Anyboby have some tips?

  Thank you very much
  Peter

  Hello

  Toshiba has recommended the use of these memory modules:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Well, the size of 1024MB should be compatible. In this case, it s not a module size.
  Have you tried to get into the BIOS? BIOS recognizes the memory module?
  Maybe the module is broken?

  In my opinion, you should check if the module memory works on a different unit. If this module works correctly on another unit if your M30X doesn t support this module of memory and you need one another.

• Satellite L100 113 does not start after upgrading memory

  Hello.

  Our Integrator bring to our company KVR800D2S5, but laptop memory modules does not start :(

  I read manual - this laptop supports 533 PC4200 memory modules.

  But SO-DIMM 533 MHz will be delivered in one month...

  The memory modules, we can install to Toshiba L100-113?

  Thank you.

  Hello

  I think that the laptop does not power upward because of a barrette memory faulty or not fully compatible.

  Please visit this memory 3rd party:

  [Memory for Toshiba Satellite L100 113 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=22360&ft=m&st=3]

  As you can see Satellite L100 113 memory can be upgraded up to 2 GB (2 x 1 GB) and you must use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM

  Concerning

• Satellite A60-672 does not start after upgrading memory

  Hello

  I bought an additional memory for my laptop, but after installing it the PC will start is no longer, when I turn it on it makes a brief noise then nothing. After taking the memory expansion out again once, the laptop still does not start.

  Peter

  Hello

  I agree with "guy sos." There is no doubt motherboard problem now. I assume you used the incompatible memory module.

  In any case, contact the after-sales Service of Toshiba partner in your country and explain to them the situation. The address that you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good bye

• Satellite C660D-107 does not start after upgrading memory

  Hi all

  I just bought a Kingmax 4 GB 1333 Mhz memory for my laptop C660D-107.

  Yesterday, I put and I saw on the BIOS if the laptop recognizes it or not.
  The laptop showed the 4 GB memory but when I booted the machine nothing happened.

  Black screen and nothing else.
  The specification to write 8 GB of RAM maximum (1066 Mhz).
  I think that 4-4 GB. The frequency is perhaps the problem?
  Opus 64-bit Win7 system

  concerning

  Robert

  Hello

  The bus front end (FSB) manages 1066 Mhz max.
  Thus, your memory at 1333 Mhz Kingmax cannot operate at 1333 Mhz.
  Usually, this should not be a problem and modules more quickly would run slowly at 1066 Mhz but there may be a compatibility issue.

  Edit the memory at 1066 Mhz I have so I recommend using modules from Kingston and hand never any problem.

• NB305 - does not start after upgrading memory

  Have just bought 2GB memory update for Toshiba NB305-106, and it does not work. Machine unbootable - started 1 GB module.

  Just read a post on memory upgrade problems - different users having problems and they used Crucial memory without any problems. -Is it true?
  Anyone got an advisor?

  Hi ian123,

  If the boot netbook doesn't, additional memory module which means this module is not compatible and you need another.

  It would be interesting to know which module you are buying exactly and what specs it has.
  Can you post this information?

  In General, I have good experience with the modules of Kingston

• R50E does not start after upgrading memory

  I tried to upgrade this laptop from the factory of 512 MB to 1.5 GB. I got a Kingston 1 GB DDR - 333 SO-DIMM, but after I installed it, the laptop does not turn. Only the power led is lit.

  I don't know why this happened, because all tests indicate that it should work.

  1. the new stick is ok. I tested it in another laptop and it worked. I also cleaned the contacts with isopropyl alcohol.

  2. the memory locations are ok. The old memory works in each slot.

  3. I tried to install the new one stick in a slot and it did not work.

  4. This update is officially supported by record of IBM and BIOS is up to date (v2.1, December 2006).

  Unless I'm missing something there is a confusing question. Unfortunately, I don't have an another 1 GB DIMM to test with.

  yehuda1 wrote:

  TBut I don't think it's a matter of density. something fundamentally wrong with this system. I just discovered that I can not upgrade the memory somehow, even not with a stick of 256 MB. The system starts only with the current key.

  OK... This is not good, but I have to tell you that...

  I guess it's time to throw the boy part of retirement and move to a new machine...

  Good luck.

• OBIEE presentation services doesn't start after upgrade

  Hi all!

  We just did an upgrade of OBIEE version 11.1.1.6 to version 11.1.1.9 and now the referral services do not start. The only entries that we can find in the log file are:

  [2015-07 - 06T 14: 03:45.000 + 02:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] Oracle BI Presentation Services (OBIPS) 11.1.1.9.0 (150417.0810 64-bit Build) start. [[

  Leader: sawserver.cpp

  Online: 589

  Geographical area:

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ]]

  [2015-07 - 06T 14: 03:45.000 + 02:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] Using store of credentials provider configured in the jps configuration file "H:\OBI11116\user_projects\domains\bifoundation_domain\config\fmwconfig\jps-config-jse.xml". [[

  Leader: csfcredentialstore.cpp

  Line: 112

  Geographical area:

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ]]

  [2015-07 - 06T 14: 03:45.000 + 02:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] security query's timeout is: 120 []

  Leader: odbcuserpoploaderimpl.cpp

  Online: 1110

  Geographical area:

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ]]

  [2015-07 - 06T 14: 03:46.000 + 02:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.threads] [ecid: 00iUCbv9f0eFKA ^ 5xVL6iW0001Zk000001, 0] [tid: 5584] verified integrity \\?\H:\OBI11116\instances\instance2\tmp\OracleBIPresentationServicesComponent\coreapplication_obips1\earmanager\analytics\B+52gsvcqjfDoqONRCPQxA [] analytics.war

  Leader: earfilemanagerimpl.cpp

  Online: 84

  Geographical area:

  Saw.threads

  ]]

  [2015-07 - 06T 14: 03:46.000 + 02:00] [OBIPS] [WARNING: 1] [,] [saw.catalog.local.checkforcatalogupgrade] [ecid:] [tid:] update is recommended in the latest version of the catalog. [[

  Leader: localwebcatalog.cpp

  Online: 250

  Geographical area:

  Saw.Catalog.local.checkforcatalogupgrade

  saw.catalog.local.loadCatalog

  Saw.Subsystems.catalogbootstrapper.loadcatalog

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ]]

  [2015-07 - 06T 14: 03:46.000 + 02:00] [OBIPS] [WARNING: 16] [] [saw.security.odbcuserpopulationimpl.getbisystemconnection] [ecid:] [tid:] cannot get a login system for Server BI (attempt 1 500) user. Sleeping for 4 seconds before trying again. [[

  Leader: odbcuserpoploaderimpl.cpp

  Line: 1054

  Geographical area:

  Saw.Security.odbcuserpopulationimpl.getbisystemconnection

  Saw.Security.odbcuserpopulationimpl.searchidentities

  Saw.Security.userpopulationmanagerimpl.initializeroles

  Saw.Security.securityimpl.Initialize

  saw.catalog.local.loadCatalog

  Saw.Subsystems.catalogbootstrapper.loadcatalog

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ]]

  [2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [ERROR: 31] [] [saw.connectionPool.getConnection] [ecid:] [tid:] authentication failure.

  ODBC driver returned an error (SQLDriverConnectW).

  State: 08004.  Code: 10018.  [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.

  [nQSError: 43113] The message returned by OBIS.

  [nQSError: 43126] Authentication failed: invalid user/password.

  (08004) []

  Leader: Connection.cpp

  Online: 471

  Geographical area:

  saw.connectionPool.getConnection

  Saw.Security.odbcuserpopulationimpl.getbisystemconnection

  Saw.Security.odbcuserpopulationimpl.searchidentities

  Saw.Security.userpopulationmanagerimpl.initializeroles

  Saw.Security.securityimpl.Initialize

  saw.catalog.local.loadCatalog

  Saw.Subsystems.catalogbootstrapper.loadcatalog

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ]]

  [2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [ERROR: 31] [] [saw.security.odbcuserpopulationimpl.getbisystemconnection] [ecid:] [tid:] could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again.

  Authentication failure.

  ODBC driver returned an error (SQLDriverConnectW).

  State: 08004.  Code: 10018.  [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.

  [nQSError: 43113] The message returned by OBIS.

  [nQSError: 43126] Authentication failed: invalid user/password.

  (08004) []

  Leader: odbcuserpoploaderimpl.cpp

  Online: 1033

  Geographical area:

  Saw.Security.odbcuserpopulationimpl.getbisystemconnection

  Saw.Security.odbcuserpopulationimpl.searchidentities

  Saw.Security.userpopulationmanagerimpl.initializeroles

  Saw.Security.securityimpl.Initialize

  saw.catalog.local.loadCatalog

  Saw.Subsystems.catalogbootstrapper.loadcatalog

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ]]

  [2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [ERROR: 31] [] [saw.security.odbcuserpopulationimpl.searchidentities] [ecid:] [tid:] error in retrieving data from the API of Population user of the Oracle BI Server user/group.

  Could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again.

  Authentication failure.

  ODBC driver returned an error (SQLDriverConnectW).

  State: 08004.  Code: 10018.  [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.

  [nQSError: 43113] The message returned by OBIS.

  [nQSError: 43126] Authentication failed: invalid user/password.

  (08004) []

  Leader: odbcuserpoploaderimpl.cpp

  Online: 462

  Geographical area:

  Saw.Security.odbcuserpopulationimpl.searchidentities

  Saw.Security.userpopulationmanagerimpl.initializeroles

  Saw.Security.securityimpl.Initialize

  saw.catalog.local.loadCatalog

  Saw.Subsystems.catalogbootstrapper.loadcatalog

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ]]

  [2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [ERROR: 10] [] [saw.security.userpopulationmanagerimpl.initializeroles] [ecid:] [tid:] error in retrieving data from the API of Population user of the Oracle BI Server user/group.

  Could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again.

  Authentication failure.

  ODBC driver returned an error (SQLDriverConnectW).

  State: 08004.  Code: 10018.  [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.

  [nQSError: 43113] The message returned by OBIS.

  [nQSError: 43126] Authentication failed: invalid user/password.

  (08004) []

  Leader: userpopulationmanagerimpl.cpp

  Online: 279

  Geographical area:

  Saw.Security.userpopulationmanagerimpl.initializeroles

  Saw.Security.securityimpl.Initialize

  saw.catalog.local.loadCatalog

  Saw.Subsystems.catalogbootstrapper.loadcatalog

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ]]

  [2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.security.userpopulationmanagerimpl.initializeroles] [ecid:] [tid:] error seeking roles in the backend to resolve the GUIDS during initialization of user population [[] Manager

  Leader: userpopulationmanagerimpl.cpp

  Online: 280

  Geographical area:

  Saw.Security.userpopulationmanagerimpl.initializeroles

  Saw.Security.securityimpl.Initialize

  saw.catalog.local.loadCatalog

  Saw.Subsystems.catalogbootstrapper.loadcatalog

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ]]

  [2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [ERROR: 31] [] [saw.security.userpopulationmanagerimpl.initializeroles] [ecid:] [tid:] error in retrieving data from the API of Population user of the Oracle BI Server user/group.

  Could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again.

  Authentication failure.

  ODBC driver returned an error (SQLDriverConnectW).

  State: 08004.  Code: 10018.  [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.

  [nQSError: 43113] The message returned by OBIS.

  [nQSError: 43126] Authentication failed: invalid user/password.

  (08004) []

  Leader: userpopulationmanagerimpl.cpp

  Online: 281

  Geographical area:

  Saw.Security.userpopulationmanagerimpl.initializeroles

  Saw.Security.securityimpl.Initialize

  saw.catalog.local.loadCatalog

  Saw.Subsystems.catalogbootstrapper.loadcatalog

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ]]

  [2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [ERROR: 1] [,] [saw.catalog.local.loadCatalog] [ecid:] [tid:] error loading the initialization/existing catalog: H:\OBI11116\instances\instance2/bifoundation/OracleBIPresentationServicesComponent/coreapplication_obips1/catalog/sample.

  Error during extraction of data from the API of Population user of the Oracle BI Server user/group.

  Could not create a system for Oracle BI Server user connection during startup. Please check the error message and try again.

  Authentication failure.

  ODBC driver returned an error (SQLDriverConnectW).

  State: 08004.  Code: 10018.  [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.

  [nQSError: 43113] The message returned by OBIS.

  [nQSError: 43126] Authentication failed: invalid user/password.

  (08004) []

  Leader: localwebcatalog.cpp

  Online: 395

  Geographical area:

  saw.catalog.local.loadCatalog

  Saw.Subsystems.catalogbootstrapper.loadcatalog

  Saw.webextensionbase.init

  Saw.sawserver

  Saw.sawserver.initializesawserver

  Saw.sawserver

  ]]

  [2015-07 - 06T 14: 03:59.000 + 02:00] [OBIPS] [NOTIFICATION: 1] [,] [saw.sawserver] [ecid:] [tid:] Oracle BI Presentation Services are shut down. [[

  Leader: sawserver.cpp

  Online: 867

  Geographical area:

  Saw.sawserver

  Saw.sawserver.terminatesawserver

  Saw.sawserver

  ]]

  We have tried to update the GUID, check the password user in the BW system, creating a new catalog. But nothing seems to work. Can someone help us please?

  
  Thank you!

  Hello..

  We've also thought of it... In the successful company there is a custom variable 'virtualize' set to true, it gave some problems. We changed the value false and now it works!

• Satellite M40x won't start after upgrade CPU test

  I have a portable M40x I took the CPU out of it to replace it with another to test the computer started fine then I stopped and took out and put it's original return CPU, and it wouldn't start. Now it primer with any one of all the CPU. When I turn on the power, all I get is a white screen for a few seconds and the laptop is closed down. Both the CPU is good because I since tested on other computers to make sure that this was not the problem.

  Anyone has any ideas on what is the cause?

  I m not surprised.
  As far as I know, Toshiba does not support updates, and it is not advisable to do something like that.
  It of one that the replacement of CPU on laptops is not easy and not recommended.
  The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a method of permanent connection and is used in the interest of miniaturization and heat dissipation.

  He was awarded the new heat paste? It s necessary and important if you want to connect again the CPU.

  It is perhaps a reason for not starting.
  I think more details you will get from the service guy in your country