Satellite L300 - fall of communication wifi after upgrading to the Vista SP2?

Similar Questions

• Error Code OxcO190036 when trying to upgrade to the Vista SP2

  I have a laptop running Vista SP 1 Home Premium 64-bit. I had a lot of problems with the windows updates, that appear to download and install, but who, at the start of the show failed.  I found I could do individually (with some exceptions), most of them and have tried the clean boot to determine if it is a third-party application problem and it seems to be a problem in Microsoft.  I tried to upgrade to the Vista SP2, which really was my original intention, and it seemed to work until it froze on a screen for a long time.  I should have written to the low all this, but I think it is! 0xc0190036!  In my view, that he said something like "msiexecu.exe" as well.  Thus, he remained on the screen for a long time and then finally closed and ran a start-up repair and after a long wait, restarted again.  He did it twice.  Any advice would be appreciated.

  The 2 methods more reliable, faster to solve this error are an "in-place upgrade", alias repair facility, or a clean reinstall of Windows Vista.
  The first requires the installation of Vista DVD disc, will bring the system back to the State it was in when you first started, but it will retain your personal data (music, photos, files programs/applications installation, etc.).

  The latter does the same thing, but will NOT retain your personal data.

  How to do a repair installation to repair Windows 7

  You can also try to run the File Checker system from a system (or CheckSUR) (sfc/scannow), the update tool command prompt, configure the system to boot, download and save the complete, standalone SP2, etc..
  But, from what I've been see posted in the discussions on the various forums of MS, there is no definitive answer to this specific error code, 0xc0190036, Stephen.

  In addition, you can contact MS for assistance in obtaining SP2 installed from this page:
  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Satellite L300 webcam no longer works after upgrade to Windows 7

  I upgraded from Win Vista to Win 7 and my webcam no longer works.
  He said that there is an error. On the support page, it is said that this model is not intended for Win7, so I installed Win Vista drivers.
  Because the driver for Win7 is not available, the link is down. http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091013162352.zip

  Any suggestions?

  Hello

  For me, it seems that you have not installed the right webcam software and so you can't get the webcam works with installed Win 7.

  Have what version of Win7 you installed? 32-bit or 64-bit?
  European driver Toshiba page provides the software of webcam for Win 7 32 bit for Satellite L300
  It s version 1.1.1.4.

  I found this choose: laptop Satellite L300 webcam driver satellite
  In such cases you will get listed all drivers webcam L300 series

• Why can't I show my battery icon after installation of the Vista SP2

  I recently installed Vista SP2 and my Volume, network and power system icons have disappeared since that time.  I go into the bar area tasks and menus then Notification and check boxes for Volume and power network are grayed out, the clock is always accessible.

  Can someone tell me how to solve this problem, I have to go back to a previous restore point, or do I have to uninstall SP2

  I had the same problem, but only with the battery and the sound icons, the network was ok. Chris-technician support suggested re-installing the drivers, after checking the driver updates. My drivers are up to date, so I reinstalled from the Device Manager and regained control of the display check boxes in the config of the taskbar menu. Strange thing is that I had to reboot twice more that the fix would "take." But now I have the icons in the taskbar and they work.

• Load of gadgets in a random order after installation of the Vista SP2

  I have two Vista Home Premium 64 PC, one with an Intel Core 2 Quad CPU and the other an AMD Athlon 64 processor. Since the update SP2 of Vista, PC AMD load randomly gadgets when loading of account user or administrator, then the Intel PC continues to load them in the right order.

  I followed some discussions on issues like, particullarly just after the update was released, but have found no solution was offered this job. Don't back to SP1 makes no sense when SP2 works fine on both my PC except for this one problem. I remember as part of SP2 improvements in the effectiveness of Gadgets and believe that service pack may have been buggy. There is no other anomalies that occur on a PC.

  Is anyone aware of a fix for this? Before SP2, I think I'll stop Gadgets and try gadgets Google or Yahoo, if it cannot be resolved.

  Note first of all, what about placing the elements not anchored where they would be so grounded. This would be simply place the items on the desktop in the sidebar, that would show them so low place on the screen below anchored points, but you'd have a dickens of a time access without closing the sidebar. With lots of gadgets, those anchored would cover those under the box. Nice thought, but not a practical solution.

  Now, as I left the thing alone for a few days, I have connected at the start of this suggestion and noted that the gadgets that I had left at the dock were in the same position when I finally logged, as well as the posted items. It was the first time that they had not scrambled. So I closed and then reopened the sidebar, and they maintained the position. I moved their autour, closed, and then reopened and the same thing, everything remained in post.  So I have carefull brought all but two gadgets, I was wondering if when they move some on the second "page" if it left the jostling. But again, all is well in the sidebar. So I disconnected and turn it back on, and they are perfect. Even with a reboot and a connection, all of a sudden, everything is back to normal and the sidebar is to remember where everything was.

  I have not checked to see if there was a Windows Update today which may have addressed, but otherwise I did correct it, it just fixed itself! For me, this issue is closed.

• Satellite 1400: I get IDE-error after upgrade to the slimeline DVD - RW drive

  I have the laptop with a DVD-ROM above it. (Second hand and no manual)
  I have a DVD - RW Drive (SOSW - 852S) I would use.

  I can adapt without any problems.

  It freezes on the spot but for about 2 minutes and then it says IDE-error then it it boot XP.

  When I go into my computer there is no DVD player.
  Have I missed something when I put the disc?
  I can't? t get the BIOS to check it out.

  I tried most of the buttons for example F2.

  Hi David

  It s a clear case for all those who have a little experience with mobile technology.
  You must know that not every drive slimeline is compatible and supported with the device.
  The Player supports uneditable master / slave or c - salt settings.

  In your case, the laptop freezes 2 minutes because the BIOS trying to find STRANGE.
  This is not possible because of wrong settings and pops up the error IDE.

• Satellite L300 has very slow wifi

  I have a connection speed of 68mpbs and speeds of the following on the these currencies:

  Dell: 15mbps
  HTC Desire: 5mbps
  PS3: 20mbps

  But on my Satellite L300 I get 1.2mbps.
  It is using vista and has a realtek wireless card driver update. I have the computer next to the router.

  Please can someone tell me why this is so poor.

  There could be different reasons for this:
  -Old WLan driver
  -For WLan of energy economy can be activated.

  Have you tried to update the WLan card driver?
  Have you checked if power save for WLan is assigned to the performance?
  This is possible in the Windows 7 power management

• After upgrading my Windows Vista computer to SP2 double my user account icons.

  Original title: After upgrading my Windows Vista computer to SP2 double my user account icons. I'm not trying to delete one of them, because all of the account will be deleted.  How can I fix it?

  I use a laptop Lenovo Dual 32-bit CPU. My OS is Windows Vista Business.

  Hello
   
  Where it seems double?
   
   
  Method 1:
  Step 1:
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode 
   
  If step 1 work, try step 2
   
  Step 2:
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Method 2:
   
  If the problem persists, you can uninstall service pack 2, put the computer in start state in minimum mode, and then reinstall Service Pack 2 and see if that helps.
   
  Step 1:
  
  Perform the system restore and go back to a date when Service pack was not installed on the computer.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
   
  Step 2: Put the computer in a clean boot state.
  Here is the link:
  http://support.Microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Step 3: Download Windows Vista Service Pack 2 here:
  http://www.Microsoft.com/download/en/details.aspx?ID=16468

• After upgradeing to the 8 elements is 13 elements safe to uninstall elements 8

  After upgradeing to the 8 elements 13 elements is it save to uninstall elements 8?

  Hi Robin,

  If you do not want to use the Version 8 more and moved to 13; You can go ahead and uninstall it.

  Reference: uninstall | Adobe Premiere Elements | Photoshop Elements

  Kind regards

  Sheena

• Satellite L300 - cannot install Microsoft updates after replacing HARD drive

  I am repairing a Satellite L300, which had a dead HARD drive. I replaced death 160 GB of HDD with a 500 GB WD, then used the recovery disks to install Windows Vista SP1 at the exit of the State of the box.

  Now, Windows update does not work, won't install autonomous not of Vista SP2 I downloaded, MS Security Essentials moved there also.
  Then I borrowed a 160 GB of work and went through the same process and everything works fine.

  To make it work with a 160 GB HARD drive, but not a 500 GB HARD drive. Why?

  > ... Standalone Vista SP2 I downloaded will not be installed
  Usually after installing recovery image, you have just to connect laptop to internet and after a short period of time, you will get messages about available Windows updates. Just install the offered updates process automatic Waterer and install important updates only.

  Let the system to install all the updates and don t force the installation of some own downloaded stuff.
  Last month I've updated HARD drive (320 GB I think) and installed Win7 on friends L300 and I didn't noticed any problem here.

• Satellite L850 - Bluetooth does not work after upgrade to Windows 10

  After the upgrade of the W10, BT did not work so I updated the drivers Atheros AR3012 version 10.0.1.1

  It still does not work. My phone can see the laptop on BT, but says that he cannot communicate with him.

  The laptop does not tosee phone & Yes the phone is discoverable. My BT headset can not be seen now by phone.
  All this worked fine with W7

  My laptop is Satellite L850 (PSKDLE)
  Any ideas?

  Hello

  In most cases, BT does not work due to lack of BT software.
  I guess you will need to install the filter for the BT driver package.

  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10... Then try to install the Atheros Bluetooth driver filter package and check to see if you will be able to activate BT

• Satellite L755-M1M3 driver sound problem after upgrade to win 10

  Salvation;
  I have problem with audio driver Toshiba Satellite L755-M1M3 after upgrade to win 10, the sound does not normally work in YouTube or Facebook even when I play the video files from my computer it is dug into the sound or noise goes, I update the driver but not help, can you help me please, I have Toshiba backup files how can I restore it?

  Inability of Toshiba to make the solution, always shocks me. !!! ???

• Satellite L750 - WLAN does not work after upgrade to Windows 10

  After the upgrade from Windows 7 to Windows 10, internet Wifi don't work do not. Unrecognized WiFi. Seems that the driver for the wifi does not work with windows 10. Any ideas please?

  Dear Jolgas,

  It seems that the problem of driver. You should installed driver WiFi for window 10.

  Thank you
  Solène

• C855 satellite can not boot from battery after upgrading W8-W10 Home >

  Hi all

  I have a problem really strang after upgrade my C855 Satellite of Windows 8 to 10 of windows. After the upgrade, I can't boot my system of battery only. With the adapter, I had no poblem.

  I bought a new battery, but it still had the same problem. Cannot start system battery only.

  The following steps, I was

  • Got the latest Bios Update
  • Used a new battery
  • Do the powerless laptop (detach battery and adapter) and hold the power button for 15-20 seonds. After that return battery and adapter
  • Do seals in my power, parameters of balanced energy vice versa

  Is there anyone who has had the same problem or can advise me?

  Thanks in advance for the help

  Hi Repairlab

  You are not alone. I currently have a C50 Sat with exactly the same problem, with the exception of the upgrade. My problem started before I upgraded to 10. Like you, I can start with the battery and using taking current, but which is rubbish for a laptop.
  I didn't upgrade the bios but the laptop does not recognize when the battery is connected and the bios update tool continues to ask for it (VERY annoying ToshIba if you already read your forums).
  I was trawl through these forums looking for a solution, but there are 0 replies on the vast majority of positions. Not even ToshIba engineers seem to have a presence.

  In any case, did you ever solved the problem, and if so can you please share?

  Thank you.