Satellite L300 has only a black screen and will not load.

Similar Questions

• My Apple Watch has a black screen and will not load.  I have it odd, but I can't seem to pair again.  Any ideas?

  My Apple Watch appears to be dead.  The watch screen is black.  I have not matched the watch and we tried pair again, but the iPhone doesn't seem to acknowledge that she and I can't manually pair either.  Any ideas on what's going on?

  Charge the watch first. Instructions here > check your battery and load your Apple Watch - Apple Support

  If necessary, restart the Apple Watch.

  You should force reboot your device as a last resort, and only if it does not. To force the restart your Apple Watch, press in and hold the side button and the digital Crown for at least 10 seconds, and then release both buttons when you see the Apple logo.

  Try the assistance provided in this support article > If your Apple Watch does not load, or it will not turn on - Apple Support

  And here > set up your Apple Watch - Apple Support

  Apple Watch user's Guide will be useful > https://help.apple.com/watch/

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!

• I accidentally put 100 files on my desktop and it went to black screen and will not work

  I accidentally put 100 files on my desktop and it went to black screen and will not work

  Hello

  Following methods and check if that helps.
  
  Method 1:

  Step 1:

  Start your computer in safe mode and check if it starts very well.
  
  Step 2:

  If the system starts in safe mode, then there would be a third-party software, causing the issue to occur. I wish that you start your machine in a clean boot State. Clean boot helps eliminate conflicts of third party software.

  Note: Follow step 7 to your computer as usual.

  Method 2:

  If this does not help, you can perform System Restore in safe mode.

• Satellite A100 has a black screen and will not charge in the Bios

  I bought a Satellite A100 - (model psaa8c-0fh00e) about 5 months ago. It was left overnight, which is not uncommon, and when I came back using about 15 hours later it was just a black screen. moved from the touch screen and keys, and nothing did. so I cold it starts and he died. I then turned it back as usual and the laptop turns on but the screen is completely black. It's not loading the normal Toshiba Bios screen.

  Now my question: If there is any way I can solve this, I am familiar with computers and parts. I don't get this cause I've ever had to reflash the wood or something like that. I am unsure of how to activate and I really want to have to take it to a shop, any suggestions would be helpful.

  Thanks in advance.

  Hi Conrad,.

  If your 100 starts normally (spinning HARD drive, optical drive LED flashes, fans turn etc.) then I suppose that your FL inverter or LCD screen is not. You can check this by connecting an external monitor to the laptop to see if it shows the normal display.

  On the other hand if there is no activity at all portable computer turn when you turn it on then I guess you have an internal hardware failure, possibly the main card, which must be checked by a Service partner authorized Toshiba since the unit is still under warranty if it is only 5 months old.

  Kind regards

• Satellite A200-13 M - black screen and will not turn off

  Hello

  I just bought a * Satellite A200 13 M *. In the first market, Windows Vista seems to be properly installed and worked to internet (wifi) access. The Norton program has been updated, and I could download and install OpenOffice. However, as OpenOffice had reported a small amount of disk space available (55 GB) I tried to see the hard drive in the browser.

  I clicked on Control Panel and waited to open. At this point, the arrow of the mouse has frozen. After awhile, I tried Ctrl, Alt, Del, and the system asked if I wanted to stop. I did, and a new screen has announced that Windows is being closed. This screen froze then in turn. I waited for a while and then tried to turn it off with the switch. The screen went black.

  However, the blue light comes on, the fan is still running, but I nothing seems to wake up the machine. I called the service of maintenance of the shop, I bought from (Darty), but they are overloaded and said they'd call me in a couple days (!). Is there anything I can do in the meantime that would allow me to continue to work with the machine.

  Thank you

  Tim Mason

  Strange sounds! But it's a computer and sometimes, these machines don't {color: #ff0000} {color} strange things ;)

  Anyway... try to remove the battery from the laptop and unplug the power adapter.
  Wait about 20-30 min and connect everything again.

  Then try turning on the laptop computer. If it is not a serious problem, the laptop must again!

• Xbox 360 wired controller works only with Windows 8. Xbox 360 Assecories status when I click on it says I have it has been changed or moved, and will not work.

  I have a controller wired xbox 360, not one of these pieces of plug. I put the USB controller and installed the device. However, it does not work. Xbox 360 Assecories status when I click on it says I have it has been changed or moved, and will not work. I have not touched. When I search for a download for Windows 8 all get them are downloads for Windows 7 and below. It's a bit frustrating to not be able to use it. I would be very happy to help.

  Original title: windows 8 wired 360 controller

  I found the problem. I had the appropriate controller and installed the device correctly. This is the program that runs the unit that had either corrupt or missing files. I uninstalled the program and then installed from the Microsoft Download page. Now he works currently. Thanks for the support.

• When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

  Acer E5-471

  When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

  Hello

  1 power off the device
  2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

• I had to change my Apple ID because of accusations of fraud but my iPhone 6s 9.2 still has the old Apple ID and will not accept old or new passwords. How can I update the iPhone with the new Apple ID 9.2 6s?

  I had to change my Apple ID due to fraudulent charges but my iPhone 6s 9.2 still has the old Apple ID and will not accept old or new passwords. How can I update the iPhone 6s 9.2 with the new Apple ID and password? I tried to perform a complete reset, but which requires the Apple ID and password that doesn't work not... pretty frustrated here.

  YYou have unlink the old iphone you as find my iphone the reset all devices on this subject from your account then plug it to your iTunes then restore a new one after that reset password that under the new phone then connect

• My disk of Windows XP Professional has a crack in it and will not install or reinstall.

  My disk of Windows XP Professional has a crack in it and will not install or reinstall. The product key is: [removed]. I don't know who to contact for replacement.

  How to replace the lack of Microsoft software

  Carey Frisch

• Now when I open my email in Outlook Express, it opens in full screen and will not restore down on a smaller size. How can I reset that?

  Already when I opened my email open in small size.  Now when I open my email in Outlook Express, it opens in full screen and will not restore down on a smaller size.  How can I reset that?

  Then, you need to ask in this forum I posted above. I have not used it myself and can be useful.
   
  
   
   

• Samsung TS-H653G DVD burner, I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully.

  I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

  I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

  Hello

  See how you go with this great piece of software.

  http://www.thewindowsclub.com/repair-fix-Windows-7-Vista-problems-with-FixWin-utility

  Concerning

  GT4U

• Satellite A210 - 11 p - gos black screen and HARD drive does not

  Hello

  My Satellite A210 - 11 p suddenly goes to a black screen and the hard drive stops working. It is always under tension and if I want to restart I have to unplug the unit and remove the battery.

  I thought it was overheating and checked the time and they were really high in the 1980s. I took the fan and cleaned (very dusty) and the basic form of thermal paste. Temperatures plummeted now immediately but I still have the same problem, I updated the graphics driver and watched the temp on GPU (which is fine) but the problem is still happening. I used a number of programs to check for errors on the hard drive and no reported problems. I reloaded Windows 7 but still no joy.
  The problem seems to occur at any time and is not due to the execution of a given program, even just browsing with firefox

  Not too sure what to do and any advice would be welcome.

  Hey Buddy,

  > I reloaded Windows 7 but still no joy.
  Have you ever tried with Toshiba Recovery disk operating system?

  The Toshiba recovery disc there is an image of the settings from the factory with all the drivers and tools. If you install Windows on this disk, you factory back.

  That would mean if you have the same problem after the installation of recovery it s really bad hardware working because you have pretested settings of Toshiba. In this case an authorized service provider can help you make an accurate diagnosis what part is affected.

• Windows Movie Maker (Vista) stuck on 'check project files', does not and will not load past to halfway.

  Hey guys,.

  I have been editing videos using Windows Movie Maker with great success, but I have recently installed the K-Lite Codec pack (http://www.free-codecs.com/download/k_lite_codec_pack.htm)

  and since then, Movie Maker will not load one of my projects.

  I uninstalled and reinstalled the codecs but I feel I did something for the Movie Maker of the program itself, installing the codec pack, it came with a list of files it wanted to replace. As I obviously had no idea what I was doing, I just said yes to everything that was recommended. I don't know for the life of me exactly what files were etc however, it seems Director impact because now it does not load the project files.

  It's such an embarrassment because I don't know what is happening and really need this problem as soon as POSSIBLE. Any help would be appreciated.

  Hey guys,.

  I have been editing videos using Windows Movie Maker with great success, but I have recently installed the K-Lite Codec pack (http://www.free-codecs.com/download/k_lite_codec_pack.htm)

  and since then, Movie Maker will not load one of my projects.

  I uninstalled and reinstalled the codecs but I feel I did something for the Movie Maker of the program itself, installing the codec pack, it came with a list of files it wanted to replace. As I obviously had no idea what I was doing, I just said yes to everything that was recommended. I don't know for the life of me exactly what files were etc however, it seems Director impact because now it does not load the project files.

  It's such an embarrassment because I don't know what is happening and really need this problem as soon as POSSIBLE. Any help would be appreciated.

  =======================================
  Might be interesting to try to open Movie Maker and go to... Tools /.
  Options / compatibility... tab and uncheck all filters.

  If you still have questions... do a Safe Mode system restore
  at a time before installing the codec pack could be useful.

  * Proceed at your own risk *.

  Using Windows Vista
  System restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Satellite A105-S4274 has only a black screen

  Screen saver burst on the laptop and I closed it.
  Open it back up and the screen is blank.
  It starts at the splash screen and stays black. I can boot into SafeMode ok. I guess it's a video thing. I have the chipset for the installation, but I get no info in the settings of the card, only this...
  chip type: not available
  DAC type: unavailable
  memory size: not available
  channel of the card: not available
  BIOS information: not available

  What is going on. I'm doing something wrong? Thank you

  Hi mate,

  you said screensaver is appeared and firm. This means, after the loading of the screensaver, your computer crashed? Then you the switched on again ("Opened it back up and the screen was empty.") and no photo was available.

  Moreover, operating system you have? Please, give a better and a MORE DETAILED description since it s impossible to solve a problem without any information. What do you have before the problem happened? You have installed some new software/drivers/etc and so on.

  I'm waiting for your answer.

  Welcome them