Satellite L300 - I can not install an update for Windows Vista
I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.
When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?
The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.
I would like for you to perform general troubleshooting steps for Windows Update.
This diagnosis is generally applied to all Windows Update related issues.
Stop Windows Update services *.
1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
2. If you receive a user account control notification simply click on continue.
3. at the command prompt, type the following commands and press ENTER after each command.
net stop wuauserv
net stop bits
net stop cryptsvc
4 Please, do not close the command prompt window.
* Rename Windows Update records *.
1. at the command prompt, type the following commands and press ENTER after each command:
2 ren %systemroot%\System32\Catroot2 Catroot2.old
3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4 Please, do not close the command prompt window.
Registration of DLL's on Windows Update *.
1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.
Restarting Windows Update services *.
1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
2. If you receive a user account control notification simply click on continue.
3. at the command prompt, type the following commands and press ENTER after each command.
net start wuauserv
net start bits
net start cryptsvc
output
4 now, please check the updates via Windows Update to determine if the problem has been resolved.
Tags: Toshiba
Similar Questions
-
I have reset my Toshiba laptop for the orginial on the parameters of the box using my recovery disk that came with the laptop when I bought it years ago. Now reinstall and update of windows, I can not service pack 1. He said that the system may reboot several times, blah blah blah, it is said installed. I just want this computer up-to-date with all the updates. Its use will be mainly internet, e-mails and word documents. Help, please
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058Diagnose and automatically fix common problems with Windows Update
http://support.Microsoft.com/mats/windows_update/Learn how to install Windows Vista Service Pack 1 (SP1)
http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspxLearn how to install Windows Vista Service Pack 2 (SP2)
http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx -
I tried to solve this problem, almost every day since the 01/08/2012 a period of 3 to 7 hrs @ a time, following troubleshooting instructions everything including the fix It Center without success. I even tried to do it manually. I need a disk to achieve? Please give me detailed instructions thoroughly. Is this a common problem with Windows Vista.
What are error codes: 800F081F & dt000
Hello
1. have you made changes on the computer recently?
2 is the issue specific to this update?
3. are you able to install other updates successfully?
4. What is the brand and model of the computer?
5 all the troubleshooting steps you have done?
Try these steps and let me know the status.
Method 1.
I suggest you follow the steps in this article.
Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates
Method 2.
Clean boot : Try to set up your computer in a clean boot state and check if you are able to install the update. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Disable Firewall: turn enable or disable Windows Firewall: http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
Note:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3.
Learn how to install Windows Vista Service Pack 1 (SP1): http://windows.microsoft.com/en-us/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. The virus scanner is provided so that the computer is virus-free before you start to install the updates.
Method 4.
The system update tool scans inconsistencies in the computer where it is installed. It usually takes less than 15 minutes to run the scan. However, the tool might take much longer on some computers. Although the progress bar seems to stop, the analysis is still running and you should not cancel the update.
The system tool that corrects problems with Windows Update is available for Windows 7, Windows Vista: http://support.microsoft.com/kb/947821
For reference:
Windows Update 800F081F: http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/2cf14002-250f-4cd3-baab-185b13d1e501/
I hope this helps.
-
I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.
What should I do?
Hello
· Did you do changes on the computer before the show?
· You get the error message?
· You are able to install other updates successfully?
Follow these methods.
Method 1: Temporarily disable the security software .
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.
Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
Method 4: Follow the steps in the article.
How to reset the Windows Update components?
You cannot install some programs or updates
Note: You must take the backup of the data before performing any installation of windows.
-
security update were not installed security update for Windows XP (KB956572) (update 1 of 1)... The amendments failure disappeared many times
kindly help to solveHi DEVOO,.
Follow the steps listed in the link below: how to troubleshoot Windows Update, Microsoft Update and Windows Server Update Services installation issues: http://support.microsoft.com/kb/906602/
Then install the standalone update package. You can download the stand-alone version of the link below: http://www.microsoft.com/downloads/details.aspx?familyid=73d2324f-be59-4b0c-b1ac-9876a13c2c03&displaylang=en and check if the problem is resolved.
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem
0X8007000D ERROR_INVALID_DATA
Try to manually download the update and installation
http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basicIt will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services
-
I'm unable to install the update for Windows Vista for x 64-based systems (KB972145). Whenever I try, I get the error code 80070570.
0 X 80070570 - ERROR_FILE_CORRUPT
The file or directory is corrupted and unreadable.Perhaps it is the update itself that is corrupted, try to manually download and install the same:
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=enIf this does not work maybe reset - WU
http://support.Microsoft.com/kb/971058/en-us
How to reset the Windows Update components?Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
Windows Update loops round and round constantly to not set up correctly, then restores the changes
Do I need to install the System Update Readiness Tool KB 947821?
Probably not: I had a lot of doubt that SP2 is installed if KB947821 has not already been installed.
Given that this problem is after a fairly recent install of SP2...
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=pick this="">=pick> ).
In the case opposite & whereas KB971644 is NOT a security update, you can simply hide the "thing":
1. stop the automatic updates service:
Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
Double-click automatic updates > click stop
(Stopping the service will take a moment)2 remove the contents of the download folder:
Start > Right click on run , and then select run as administrator >
(type or copy/paste) %windir%\SoftwareDistribution > [OK]
Open the download folder and delete its content
Close the window.3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update | View the updates available (or Select the updates installed): right click on the (platform) update for Windows Vista (KB971644) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.
4. start the automatic updates service:
Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
Double-click automatic updates > click Start
(Stopping the service will take a moment)=====================================
To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.NB: If KB971644 were available for download/installation manual (and is not), I would have you try it.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I have my computer set up to warn me about available updates. I downloaded the update for Windows Vista Edition full and proceeded with the installation. To restart my computer, I receive a message that a file is missing or damaged and reinstall drive does nothing. I bought the computer from a colleague about 3 years ago and until recently just used it to play DVDs and music. In July, my son set up a wireless network I can use internet on this computer and my main on a floor. What happened and how do I get my second working computer? File: ntoskrn1.exe, status: 0xc0000098.
Hello
I suggest you to refer to this link and check if it helps: http://social.technet.microsoft.com/forums/en-US/itprovistasp/thread/4dc56ab0-3db9-4ff0-b156-864394fe6c04/
It will be useful.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
http://support.Microsoft.com/kb/971644
How to get the platform for Windows Server 2008 and Windows Vista Windows Update updates
Update for Windows Server 2008 platform and the platform for Windows Vista update can be downloaded from Windows Update. To obtain these updates, follow these steps:
- Click StartCollapse this includes this image
Click all programsand then click Windows Update.
- In the navigation pane, click check for updates.
- When updates are found, click view available updates.
- Select the package to update that you want, and then click install.
For problems with Windows updates:
Windows Update Forum:
It's updated operating system Vista, upgraded installation and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
I am running microsoft updates and one update for windows xp (KB2641690 will not install)
Hello
I suggest you to follow the steps in this link and check if it helps:
http://support.Microsoft.com/kb/822798
It will be useful.
-
try to install the update for windows Vista service pack 2.
install the drop-outs, citing error code 80070490. What should I do now?
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
http://support.Microsoft.com/kb/9478210 x 80070490 ERROR_NOT_FOUND Windows could not search for new updates. However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044 -
Will not install SP 1 for Windows Vista error code 800706BE.
I try to install Service Pack 1 for Windows Vista and it continues to fail with the error code 800706BE and then my security/antivirus software detects a trojan virus. What can I do? As I would like to download the trial version of Office 2010.
Just open the program (it may be possible from the notification area icon if you have an or there should be an entry in the menu start / all programs for the program) and most of the AV software that I have seen or used the option clearly identified on the main screen or another primary screen if there are tabs or on a toolbar or at worst a deep layer in the options bar menu. If there are options, clear all.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Cannot download and install the update for Windows Vista (KB2481109) security
Up-to-date security for Windows Vista (KB2481109) and update for Windows Mail Junk E-mail Filter [March 2011] (KB905866) ideas?
Error codes displayed are:
Code 8E5E0147
Code 8E5E03FB
But without any answers of MS
Anyone able to help?
Thank you very much
Hello
you are this posting in the wrong forum
It comes to the installation of vista operating system instance
try this or repost
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
-
Windows 7 - can not install the updates for my computer
Cannot install upgrads on my computer
DDzajko
Try to download it manually from http://www.microsoft.com/downloads
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updatesOther suggestions:
Reset Windows Update components:
http://support.Microsoft.com/kb/971058
http://support.Microsoft.com/kb/883825Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
In addition, you can temporarily disable your Antivirus during installation.
Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
Maybe you are looking for
-
Bookmarks and history now empty and does not.
I turned on Sync on a computer that does not connect to the cloud. I have since disabled. However, history and bookmarks are deleted and I can not add to them. Also the url of the site, I does not always display in the slot of the menu.
-
TestStand 2014 Version selector "Program Error"
I upgraded to TestStand 2014 from 2013. I suspect that I deleted TestStand 2013 by using the uninstall program NOR but had not chosen 2014 TestStand using the version selector. When I try and run the selector version as an administrator, I get an err
-
HP 15-g040au (J6L81PA): add memory to HP 15-g040au (J6L81PA)
Hi, I want to add memory to my laptop - Task Manager says he uses one of the two slots, but the HP product page says there is a location that is accessible to the user. I can't find any documentation or manual on how to access the RAM so I can't even
-
It is after the removal of Security Tool virus. I need to delete everything that is telling Windows (XP SP3) that there is a firewall and anti-virus (es) when they are not running. I need to install real firewall and antivirus, but cannot.
-
TableView with FocusChangeListener question field
I created a TableView and adds items. On one point, I use a FocusChangeListener to get the read line for action. It works for OS 7, especially because the simulator (9900) has a touch screen. However, in an OS 6 non touch screen simulator (9650), t