Satellite L300 - I do not have 32-bit colors on the screen
Hi all
I just bought a new laptop Toshiba Satellite L300 and after Vista initial installation it doesn t show the colors of the screen properly. I set up the resolution, but also the 32-bit color, but on the screen, it shows just something like 256 colors.
Everyone he knew similar, any idea where I should look like or change something to have own 32-bit colors.
Thanks Zeljko
Hello
To be honest, it's really strange.
What you could do is to repeat the HARD drive recovery.
Turn on the laptop, press the F8 key and choose fix my computer.
Then choose Toshiba Recovery and you start the resettlement process.
The laptop must be set to the factory settings, and you can check if the display problem would persist.
Good bye
Tags: Toshiba
Similar Questions
-
Do not have NAVIGATOR_WINDOW_INACTIVE if you lock the screen during the startup screen
Title describes the problem, is this a bug or what type of event should I listen to?
Solved the problem in NAVIGATOR_DEVICE_LOCK_STATE of handling then check if the screen is locked. I guess that's the solution?
-
Satellite L300-215 - Webcam not working not
The webcam on my Satellite L300-215 did not work because I downloaded the new software of Toshiba months ago.
The Chicony webcam is not yet recognized, and it will not install the Toshiba software.Two hours with Toshiba technical staff, including their having access remote to my computer, does not solve the problem.
It seems that this is a very common problem and I tried some of the suggestions on the assignments, but without result.Anyone out there have the answer?
I have two laptops Toshiba, Satellite P200D and Satellite A300, both with webcam and everything works fine. I agree therefore with statement on the very common problem.
Webcam works well if your laptop is preinstalled with recovery image Toshiba (factory settings)?> I tried some of the suggestions on the assignments, but without result.
What you have tried to solve this problem? -
Satellite L300 - Windows does not recognize the connected device
I have Toshiba Satellite L300 series, PSLB8E. It came with a basic version of vista pre-installed window and it was working fine until I decided to update.
I took it to a computer for an upgrade store to ultimate window.
This version worked very well for a few weeks until I have received a message on the screen that says: 'I have to get a genuine copy of windows.Because ever since I started having problems with my usb ports, my computer couldn't detect something I connect to it (usb, printer, mouse, etc.) he worked with modem only, sometimes it would open my external hard drive but it does not have its drivers.
I then decided to buy a window 7 home base, but instead of this problem will disappear, that it got worse as my usb ports completely stopped working.
I tried all the stuff I can think, but nothing has worked. the problem I have is that I don't have the original disc in Windows vista
Someone please help!
I agree: installing drivers for Windows 7 is very important to get all devices work correctly. Windows 7 is much better than Vista OS and I don't see any reasons why your L300 Sat should not work properly with this Win 7 OS.
I recommend you to install the Windows 7 system again by install completely clean.
After that, download all drivers Toshiba Win 7 of the Toshiba UE driver page.Very important are the drivers as value added package, Chip Set Utility, card reader controller, display driver, LAN driver, WLan, Sound Driver, Storage Manager and driver of the touchpad
-
Why I do not have a button "nearby", after the upgrade to watch OS 2.2
Why I do not have a button "nearby", after the upgrade to watch OS 2.2
If you are referring to the card program, I have this button on my screen.
-
I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone. The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?
Probably there is debris and dust in the decision-making of the lightning. Serve with compressed gas canned (NEVER orally). If this doesn't help, try electronic contact cleaner has a q - Tip. Finally, take it to Apple.
-
need help this is the message that I have this morning cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.
Hi amyturnkey,
What operating system do you use? (Windows / Mac?) What version number?)
This thread pourrait be useful: error starting InDesign CC: '... ". lack of sufficient permissions to access the folders preferences'
Kind regards
Maurice -
Hi, I get the error message following the launch CC15 attempt:
Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.
Any help appreciated as I passed the age trying to find a solution!
Hi André,.
It seems your preferences and cache files have not all permissions. There are two things you can do to solve this problem:
1. provide full access to the preferences and cache of InDesign files, more information on ERROR when you try to launch
2. or create a new user on your system admin and start InDesign from there.
Thank you
-Anshul
-
can not update software adobe reader IX error windows do not have sufficient rights to modify the file
Hi janl35265451,
Make sure that you are connected with the Admin account to install the updates.
Open the drive, go to the Help menu & "Check for the Updates.
Kind regards
Nicos -
I got this message when I installed the latest InDesign. Cannot open the application. Do you know how to fix it? "Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.
-
I want to create a PRIVATE within my site from MUSE section so that it is password protected... many of my clients may not have their information visible to the public
You can not. Without a suitable backend server, that is. This has nothing to do with the creation of the page, it's a technical thing.
Mylenium
-
A new installation of indesign CC 2014 - I got this error message:
Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.
I tried to uninstall the application and reinstall it, still get the error
I tried to install a previous version - indesign 9; also get the error
I tried logging out CC and return, still does not work
I tried restart my desktop computer, still does not work.
went to the disk utility to verify and repair permissions. repaired all of an existing, still does not work
Apparently, a permissions problem, I don't know what to do to fix this
-
'You do not have permissions for this item' - the HARDWARE SPECIFICATION
Dear members,
I'm trying to access a material specification, but I am constantly presented with the following message: ""you do not have permissions for this item.
Curiously, I could already access specifications but now I am presented with this.
I have the same problem with the profiles of LIO.
Does anyone have a known solution for this?
Kind regardsThis happens usually when you do not have read permission according to the State of the workflow of the specification. Different permissions can be set up for different status in the Administration of the WFA (WorkFlow).
In addition, if you use business units as a safety feature (rather than just BU visibility), you might get this message. In this case, you should not be able to see this specification in a search result, though, so if you see in the results of material technical search page, is not a DRINK problem, it's a workflow issue permission to read.
There is an additional possibility, that is if your team has put in place the extensibility point of SpecVetoHandler, which allows for personalized reading permission checks added. It is a technical extensibility point configured in the config file CustomPluginExtensions.xml.
But more likely, it's a workflow permissions problem. You should ask your users to s Adminitrator of workflow.
Concerning
Ron -
Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.
These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.
Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu
> options > advanced > General
. -
Original title: someone help please?
Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.
So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?
Hello
1. have you made changes on the computer before this problem?
2 - what you want to say that you receive this error message during the installation of Windows XP?Check to see if the following is useful.
Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.
Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.
Warning of the BIOS:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation
Maybe you are looking for
-
Upgrade the hard drive in a Satellite 4100XCDT
Hello Can someone tell me how high I can update my hard drive in a Toshiba Satellite 4100XCDT?I know he now has a 6 GB one, but I would like to know which is the most important, I can put in this machine.Any information would be appreciated. Yours si
-
You can add a 2012 server box to an area of the 2008 R2 domain controller
We have so many servers 2008 R2, including our domain controllers. We add a box of 2012. Can it be added to the domain without any problem? Functional? Roles? We discovered that it was ok with respect to licensing. But not sure about the other featur
-
Bluetooth mouse Microsoft disconnects randomly.
Vista Ultimate 64-bit. Laptop HP HDX with Bluetooth / wireless card. The MS 5000 Bluetooth Mouse mouse log and will not reconnect after slowing for a hour or two. Back to zero is to reconnect the mouse BT. Cycling the power on the mouse does not hel
-
Can't get HP 2100 M configured as USB printer
Recently, I upgraded my systey (Dell, Vista 64-bit) and can't get my HP 2100 M laser printer configured correctly. The new system has only USB ports, no connection to printer port, so I went thr cable to a USB/parallel printer cable. Vista does not
-
Disable AutoPlay in window 2007
How to disable auto run CD, DVD, USB drive etc permanently in Home Basic window 2007?as there is no gpedit.msc file or folder.How can I stop AutoPlay in my system