Satellite L300 - impossible to switch to Windows 7

Similar Questions

• Satellite A500 - impossible to switch to Windows 7

  Recently, I received my copy of Windows 7 ultimate 64-bit. When I actually bought my laptop, it was delivered with Windows Vista family premium 64-bit, all I wanted is upgrading to Windows 7 I bought.

  So I followed the instructions with the Windows 7 Upgrade Assistant tool but I get this annoying message of release-able
  This model does not support windows 7... and it closes when I click OK... So I am not able to upgrade because I'm afraid of damaging anything. Slthough its an A500-PSAM3E - 014011G 3. It can completely support Windows 7, so I have yet any idea where to start to fix that. The version of the BIOS is same 1.21

  I can't find a solution for this PLEASE HELP

  Hey,.

  What disc of Windows 7 you are using? Is this a Microsoft one?
  And you get more error than only this information?

  To be honest, I never heard such a question. It works if you install Windows 7 clean install and not an upgrade?
  Maybe also should contact Microsoft for help

• Satellite L300 laptop will not load Windows

  I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

  The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
  After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

  My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

  Hello Jane and welcome in the Toshiba forum

  After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

  Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

  You have some important data saved on your laptop?
  Do not use this disc reinstall Vista and everything should be ok again.

• Satellite L300 - impossible to go from Vista to Win7

  Hello

  I have a problem I bought the Satellite L300 (windows vista family premium was installed, I had to buy the upgrade to windows 7 in toshiba which I did and installed without any problem at all.)

  But now after using the cause of recovery, I had a virus on my computer that he returned to windows vista.

  Now when I try to run the upgrade cd 7 it gives me a message (the template does not support windows 7 upgarde) how could this be, since I already had on this system before?

  Can someone help me to fix the problem of the tp or give me an explanation on why sound what do I do?

  Thank you.

  Hello

  I got a Toshiba document on upgrading Vista to Windows 7:

  + Windows 7 upgrade: step by step Upgrade Guide +.
  http://APS2.toshiba-tro.de/KB0/TSB9902P60000R01.htm

  and

  + Which updated the path exists since Windows XP, Windows Vista and Windows7 for Windows7? +
  http://APS2.toshiba-tro.de/KB0/TSB9C02RG0001R01.htm

  Here also some useful information of Toshiba U.S. on Win 7 upgrade:
  http://us.Toshiba.com/Windows7-upgrade/

  Check this box and post comments!

• Satellite L300 - perform a repair of Windows Vista installation

  Hello
  I have a Satellite L300. I have NO dvd of windows vista, the seller told me that the dvd of windows found in the pc.

  Now I have to solve a problem of windows update (80073712 - kb 971644) and in this link http://support.microsoft.com/kb/957310/en-us I do not know how to perform the steps in method 3, because I don't have a vista dvd.
  Can you help me???

  * Method 3: perform a repair of Windows Vista installation *.
  * When you perform a repair installation, it restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.*

  * To perform a repair of Windows Vista installation, do the following: *.

  * Restart the computer
  * Insert the Windows Vista DVD in DVD of the computer dur.*

  * Note If Windows does not automatically detect the DVD, click Start, type : \setup.exe in the search box, and then click Configure in the list programs. Then, click install maintenant.*
  * Click go online to get the latest updates for installation (recommended). *
  * Insert the product key if you are prompted for it.*
  * Click to accept the Microsoft software license terms
  * On the type of installation you want screen, click Upgrade.*
  * When the installation is complete, restart the computer and try again to install updates again.*

  Hey,.

  I m a bit confused now
  What exactly happens on your laptop? You can start Windows?

  I think the article MS says it all: to repair Windows you need a disc of Microsoft Vista.

  Alternatives to reinstall the entire system use the Toshiba recovery disc that contains a picture of the factory settings. Have you created this disk?

• Re: Satellite L300-1AP BSOD when installing Windows XP

  I have a new L300-1AP and would like to intall XP Pro but when I try it I get the stop message 0x0000007b.

  Made a new installation disc integrated with all updated sata drivers, I still get the message. I'm not sure about how I would install drivers of third party on the F6 function because it has not a diskette and cany to find how to do the same thing in a CD anywere.

  I appreciate that we should all try to use the vista OS that came with it, but it is a problem of compatibility with older software that I use.

  Can anyone help please?

  In the Microsoft Knowledge Base is an article about it:
  http://support.Microsoft.com/?scid=kb%3ben-us%3B324103&x=17&y=8

  I think that there is something wrong with the SATA drivers. My Satellite L300 works with XP without problems or BSOD when installing.

  The SATA drivers are in this package, and the Intel Storage Manager you can download on the Toshiba site.
  You can create your own installation with nLite (http://www.nliteos.com/) disc.
  If I have integrated the SATA drivers, you do not have to press F6. The HARD drive will be automatically recognized.

• Satellite L300-1AQ - Fan switches do not properly under Linux

  For L300-1AQ, the CPU fan is controlled by the BIOS. When you start the Linux machine against the cold, the fan runs at least as it should. But then nothing happens until the critical temperature is reached. At this point, the CPU fan going at maximum speed and stays there even when the air coming out is still cold. So the only way to make the rotation of the fan down once again is to restart... The startup parameter "acpi_osi =' has no effect."

  This isn't a hardware problem, because the fan works well under Windows: slow and steady rotation up in States somewhere between min and max. After a few seconds slow and steady to the low towers.

  This could be a roadmap dsdt buggy, which affects only Linux.

  Problem is that Toshiba doesn't support this model of laptop for Linux and there is no tool available as Toshiba Power Saver for Windows power management.
  Try visiting some Linux forum and discuss it.

  On Linux forums, you will find the most useful information or people who might be using the same specifications with the same distribution of Linux.

• Satellite L300 - 14G - want to install Windows 7 32 bit

  Can anyone help?

  I have a Satellite L 300 - 14G with a terrible copy of windows 7 on it (cannot be updated occasionally, validation problems, etc.).

  I think he still has the vista on HARD drive recovery partition (it's a healthy score of 1.46 GB OEM) but because its operation Win 7 I can't access it.

  Whenever I try to go in diagnostic tests (option of safe mode) there is no option for a factory restore that I tried with '0', all turning on but nothing.

  I really want to Win 7 32 bit on it & I was hoping there is a kind of installation disc Toshiba Win 7 32 bit similar to what use of Dell (who says Dell disk) which only works on PC Toshiba for a fee, clean install.

  Can anyone help?

  Post edited by: milkyjoe

  Hello

  Your laptop has been pre-installed with Windows vista, and that's why you can order only a recovery disk Toshiba that contains a Vista system.

  If you use Windows 7, you must install this system using the Microsoft Windows 7 installation disc

  The essential Win 7 drivers can be downloaded from page driver Toshiba.

• HP EliteDesk 800 G1 USDT: impossible to switch to Windows 10

  This is my first time on these forums, so I hope this is the right place to post this.  I'm trying to upgrade my work computer to Windows Windows 7 Professional professional 10.  I work in it, so I have full administrator rights to do this.  However, when I try to run the Upgrade Wizard of Windows 10, it keeps telling me that I can't do, and the display is the problem.  The message it gives is:

  ! Display: The display is not compatible with Windows 10.  Consult the manufacturer for support.

  I am currently using two monitors, a HP EliteDisplay E241i and a HP Compaq LA2405wg.  Both work very well.  I just went to HP's Support site and downloaded the latest drivers for both, and it has not yet resolved the problem.  Is someone can you please help me understand why I can't upgrade?  The app has only said that it is not compatible and offers no help or anything.  Thank you very much.

  Thanks for the info...

  You're lucky - done HP offers 32-bit Drivers for some versions of Win7 for your PC.

  It's the HP for your PC product page: http://h20565.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5387484 & lang = to & cc = us

  Select the version of the OS you are using.

  Then, download and install the graphics drivers.

  Then restart.

  IF all goes well, you should have complete graphics capabilities after that.

  However, I've updated several Win7 PC to Win10, and with everyone, some issues had to be resolved - so I wrote this guide to help people who are determined to make this update...

  -------------------------------------------------------------------------

  You think about the amount of work that you want to post just to run Win10.  Seriously.

  Desktop computers older Win7 tend to fare badly when upgraded to Win10 - mainly due to lack of HP Win10 drivers for older hardware.
  
  If you are determined to upgrade to Win10, you must be willing to do four things:
  (1) do a full image backup of disk external drive or USB stick, capacity
  (2) changes to the reserved system partitioning hard disk recommandΘes mΘthodes,
  (3) use a different approach and maybe more than one, as Windows Update to do the upgrade,
  (4) prepare for a clean install.

  ---------------------------------

  1: backup of images:
  This is VITAL, because the machine is doomed to failure of the upgrade, and when that happens, you will learn that GoBack to Win10 function is NOT reliable, and that can leave you with a corrupt machine that will require the factory reset and lose all that on it, to get it working again.
  
  You can avoid this by making an image backup to an external hard drive or a USB drive using Macrium reflect (MR), which provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  ---------------------------------
  2: System reserved for resizing:
  There is a small partition on the HDD with Win7 preinstalled machines known as system reserved.  It is something known as the boot loader code.  There is 100 MB format: all that is necessary for Win7.  But Win10 needs 350 MB and, in some cases, is NOT able to resize it on its own.  IF this happens, you must manually use a partitioning tool to resize it yourself.
  ---------------------------------
  3: use a different approach to upgrade:
  Windows Update is the simpler, but less reliable, way to do the upgrade from Win10.  A much better and more reliable way is to use Microsoft Media creation tool: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10 choose the upgrade this option now PC.
  
  After all this, you know that MS install drivers with only the most basic features.  Given that HP does not have drivers for your PC Win10, this limited functionality is the best you're going to get.  HP does not actively write new drivers from Win10 for the old PC Win7.  To keep all the features of your PC, your best shot is NOT to upgrade to Win10.
  ---------------------------------
  4: be prepared to clean-install:
  If you do all this, and after the upgrade, your PC works partially, this means that the upgrade is not well and stuff is still there the previous OS corrupt the functionality of Win10.
  
  You MIGHT be able to solve the problem in fact a clean install of Win10. Problem is that, often, a clean-install does not recognize prior activation, even if it should. So, before doing the upgrade, follow these instructions on the community forums Win10 on creating a genuineticket.xml file: http://www.tenforums.com/tutorials/23354-clean-install-windows-10-directly-without-having-upgrade-first.html
  
  You need more later to activate your pc Win10 after the installation of clean.
  
  -----------------------------------------------

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Can satellite U400-112 - I switch to Windows 8

  Can I upgrade my Satellite U400-112 Win8?
  I have 4 GB of RAM and today I am running win7 Ultimate 64-bit

  Thank you

  Hello

  Visit http://eu.computers.toshiba-europe.com/innovation/generic/windows8-message and that compatibility of Toshiba with the list of all matrix them currently supported models of laptops.

• Satellite L300 - impossible to restore unity

  A friend has a nice laptop L300 Sat that become corrupted.
  The data D: drive still contains 4 .swm files and the E:winre player is always accessible (command prompt)

  Pressing F8 or 0 does not give the possibility to restore using toshiba hdd recovery.

  Is there a way to recover the drive or create a recovery dvd?
  Anywhere I can get a copy of the toshiba recovery cd/dvd creator?

  concerning

  Hello

  Seems you are not able to start the recovery of HARD drive and it seems that you have not created the recovery disc Toshiba at the beginning as described and recommended in the user's manual

  As much as I know there no other way to recover the device.
  Either you use the recovery disk or recovery disk
  If you n t have recovery disc, you can order it from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  > Anywhere I can get a copy of the toshiba recovery cd/dvd creator?
  Lol s is not available for download.

• T530: Impossible to switch to Windows 10

  Everytime I try to upgrade to Windows 10, either from Windows Update or the DVD, I get the following message after the restart:

  0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation

  My T530 running its original Windows 7 64 bit, completely up-to-date with all Lenovo software up-to-date as well. BIOS upgrade to the latest version 2.64.

  Things I've tried:

  1. remove all the stuff from Lenovo

  2. remove all drivers

  3. turn off all non-critical devices in the Windows Device Manager.

  4 turn off all devices of o in BIOS.

  5. the system for recovery media factory restore, do all the updates again.

  None of those who have worked, I still get the same error. After the first phase of the installation and restarting, I never have the new Windows logo splash, only the old W7 so the window error and then I connect to my system unchanged W7.

  I googled looking for a solution, but it seems that the reason may be different for each configuration, and I couldn't find anything specific to my system.

  Mine is an Intel i5 - 3210M, 4 GB RAM, 500 GB of HDD, Intel graphics card. I have a Linux partition and Boot Manager to select the Grub starts loading system.

  Thanks in advance for any attempt to help!

  
  

• HP Pavilion 17 Laptop: impossible to switch to windows 10 windows 8.1 because the cpu is not compatible.

  Hello

  When I tried to download windows 10 via the 10-notification windows on the taskbar, it said that my laptop could not download windows 10 because my processor is not compatible. I am running windows 8.1, and normally all laptop running windows 8.1 should not have problems with the cpu upgrade to windows 10, so I don't know what could be the problem.

  Your portable computer is compatible with Windows 10.

  You have no need for the icon get Windows 10 to install Windows 10.

  You can download an ISO or proceed directly from the Microsoft web page at the following address. https://www.Microsoft.com/en-us/software-download/Windows10

  Some drivers have been provided by HP alreaduy at the following link.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-17-notebook-PC-series/5401229/model/7101268#Z7_3054ICK0KGTE30AQO5O3KA30R1

  You can get the rest of the drivers required since Windows update.

• Impossible to switch from windows xp to windows 8

  Bank requires upgrade xp to W.8 message saying will not support upgrade.  WHAT TO DO...

  The Bank is probably you asking to upgrade your browser to version 8 If you want to access your account online:

  http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-8.

  As a word of caution, do a backup of your Favorites at the moment:

  Open your current browser and export your Favorites to a file named bookmark.htm

  Then you can begin to upgrade your browser via the link above.

• Impossible to switch from windows vista

  Hello!
  When I have vista windows upgrade vile com a failcode 800700CB masage

  Hi 800700cb,
  Thank you for using the Microsoft answers forum.

  Before proposing any stage, we need additional information about the upgrade that you mentioned.
  -You try to upgrade from a previous version of windows to windows vista?
  -If so, exactly when you receive this error?

  If you try to install some updates through windows update, try the following steps:

  1. open the following link: http://support.microsoft.com/kb/956699/en-us
  2 go to the "fix it for me". Download the tool and save it to your computer. Run the tool. After the completion of the process, restart the computer and try to check the updates of windows now.

  To resolve the problem manually or if you are not able to follow the steps above, follow these steps:

  If there are damaged files in the folders "C:\Windows\SoftwareDistribution" or 'catroot2', try running these commands in an elevated command prompt. To do this, click "Start" and type "cmd"in the "Search" box. " In the results area, right-click "cmd.exe" and then click "run as administrator". You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on "continue". Then, click on "continue". At the command prompt, type the following commands one by one and press ENTER after each command.
  -net stop wuauserv
  -net of stop bits
  -net stop cryptsvc
  -ren %windir%\SoftwareDistribution SoftwareDistribution.old
  -ren %Windir%\System32\catroot2 catroot2.old
  -net start wuauserv
  -net start bits
  -net start cryptsvc
  Exit the command prompt.

  Create a batch file and copy the following content into it, and then double-click on it to re - register modules or dll files. Open "computer", click on the 'Tools' menu and click 'folder options'. Go to the 'display' tab uncheck "hide extension for known file types". Click 'Ok' at the bottom of the window.
  Now right-click on your desktop, select 'New', then 'text document', then press ENTER twice. Paste the following commands. Click on 'file' and then click 'Save'. Give a name like "test" and save the file. Now right-click on the file, click "Rename." Rename the file "test.txt" in "test.bat". Press on enter and if prompted, click on "continue". Once you see that the file name has changed to "test.bat", double-click on the file that runs the scripts.
  regsvr32 wups2.dll/s
  regsvr32 licdll.dll/s
  regsvr32 regwizc.dll /s
  regsvr32 msxml.dll/s
  regsvr32 msxml2.dll Kbps
  regsvr32 msxml3.dll/s
  regsvr32 comcat.dll/s
  regsvr32 shdoc401.dll/s
  regsvr32 shdoc401.dll/i/s
  regsvr32 asctrls.ocx/s
  regsvr32 /s of oleaut32.dll
  regsvr32 shdocvw.dll/i/s
  regsvr32 shdocvw.dll/s
  regsvr32 browseui.dll/s
  regsvr32 browseui.dll/i/s
  regsvr32 msrating.dll/s
  regsvr32 mlang.dll /s
  regsvr32 hlink.dll /s
  regsvr32 mshtmled.dll/s
  regsvr32 urlmon.dll/s
  regsvr32 plugin.ocx/s
  regsvr32 sendmail.dll/s
  regsvr32 scrobj.dll/s
  regsvr32 mmefxe.ocx/s
  regsvr32 corpol.dll/s
  regsvr32 jscript.dll/s
  regsvr32 msxml.dll/s
  regsvr32 imgutil.dll/s
  regsvr32 thumbvw.dll/s
  regsvr32 cryptext.dll/s
  regsvr32 rsabase.dll/s
  regsvr32 inseng.dll/s
  regsvr32 iesetup.dll/i/s
  regsvr32 cryptdlg.dll/s
  regsvr32 actxprxy.dll/s
  regsvr32 dispex.dll/s
  regsvr32 occache.dll/s
  regsvr32 occache.dll/i/s
  regsvr32 iepeers.dll/s
  regsvr32 urlmon.dll/i/s
  regsvr32 cdfview.dll/s
  regsvr32 webcheck.dll/s
  regsvr32 mobsync.dll/s
  regsvr32 pngfilt.dll/s
  regsvr32 licmgr10.dll/s
  regsvr32 icmfilter.dll/s
  regsvr32 /s of hhctrl.ocx
  regsvr32 /s c:\windows\system32\inetcfg.dll
  regsvr32 tdc.ocx/s
  regsvr32 MSR2C. DLL/s
  regsvr32 msident.dll/s
  regsvr32 msieftp.dll/s
  regsvr32 xmsconf.ocx/s
  regsvr32 c:\windows\system32\ils.dll/s
  regsvr32 /s c:\windows\system32\msoeacct.dll
  regsvr32 inetcomm.dll /s
  regsvr32 msdxm.ocx /s
  regsvr32 dxmasf.dll/s
  regsvr32 l3codecx.ax/s
  regsvr32 acelpdec.ax/s
  regsvr32 mpg4ds32.ax/s
  regsvr32 voxmsdec.ax/s
  regsvr32 danim.dll/s
  regsvr32 Daxctle.ocx/s
  regsvr32 lmrt.dll/s
  regsvr32 datime.dll/s
  regsvr32 dxtrans.dll/s
  regsvr32 dxtmsft.dll/s
  regsvr32 WEBPOST. DLL/s
  regsvr32 WPWIZDLL. DLL/s
  regsvr32 POSTWPP. DLL/s
  regsvr32 CRSWPP. DLL/s
  regsvr32 FTPWPP. DLL/s
  regsvr32 FPWPP. DLL/s
  regsvr32 WUAPI. DLL/s
  regsvr32 WUAUENG. DLL/s
  regsvr32 ATL DLL/s
  regsvr32 WUCLTUI. DLL/s
  regsvr32 STINKS. DLL/s
  regsvr32 WUWEB. DLL/s
  regsvr32 wshom.ocx

  Restart the computer after you perform the steps above. Now, try to check the updates. If you are still unable to check the updates, note the error number that windows update gives. If there is no error or message numbers, please send us the last quarter of the log file of the "windowsupdate.log" that contains the report. To access the log file, click "Start", type "windowsupdate.log" into the "Start Search" box, and then press ENTER.

  Reply back and let us know if this helps.

  Thank you and best regards,

  Mauricette
  Microsoft Answers Support Engineer
  Visit our

  Forum of Microsoft answers Feedback and let us know what you think.