Satellite L300 - no sound after installing Win XP

Similar Questions

• Satellite U300 - no sound after installing Win XP

  Hello

  I just reinstalled windows xp Prof today and upgraded to service pack 3.

  Sound has worked well in the first until a reboot, no more noise.
  A few reinstalls the drivers now, sometimes he says its all installed fine, other times it says no audio devices installed.

  In both cases there is no sound...
  Sometime on a restart (many reboots today) the sound suddenly came back to life, to die again at the next reboot...

  Im hoping someone can help me with this problem cos Im leaving on vacation tomorrow and really need my sound ;)

  Thanks in advance!

  Hello

  You should on Windows XP two audio patches if you have a card high definition audio:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  These updates are in integrated SP3, you must install Service Pack 3 or the updates first, then the audio driver. So in your case, I would like to delete the sound driver, use CCleaner and then install the latest version from the Toshiba site.

  Good luck!

• Satellite L350D - 12 M PSLE0E - no sound after installing Win XP

  Hello

  I installed Win XP SP3 on my Tosh laptop.
  I have everything works except the sound.

  We know of a compatible for this model sound card driver in XP.
  I downloaded the bucket full of HD and AC97 Realtek drivers, but none seems not to work.

  I'm really struggling with this one and do not want to go back to Vista.

  Reall any help is appreciated. Robbie.

  Hello

  I had the same problem with sound after installing XP everything seemed fine but no sound!

  I found a solution;
  You need to install the MS patches; KB835221 and KB888111
  These hotfixes must be installed before installing driver sound!

  But I put t know how it works with SP3. I think that you need to remove the SP3 first and then you could install the patches mentioned.

  However, once the patches have been installed, you must follow with the Realtek HD audio driver installation. The latest driver should be placed also on the Realtek page too.

  Well, in my case it worked so it should work on your laptop too!

• Satellite A300D - 14 p - no sound after installing Win XP

  Hello

  I just intalled XP and everything works fine, just a problem with the sound.
  I instaled driver sound and sound is very high up with no bass, I didn't have this problem when I had VIsta or Win 7 installed, it must have something to do with drivers.

  My windows is established to date, have SP3 and everything works perfectly.

  What should I do?

  Thank you!!!

  Nikola

  Hello

  I had the same problem.
  But I could solve this install Win XP fixes needed.
  You must generally 2 patches:
  AUDIO patch 1: KB835221
  AUDIO patch 2: KB888111

  But these fixes are also part of the SP3.
  So if you have previously installed SP3, you don t need other patches.
  Bu the point is that SP3 must be installed before installing the audio driver.

  If you have already installed the sound driver then delete the system.
  Go to Device Manager, then remove the sound card from the list of devices and all devices high definition.
  Restart the device and then reinstall the audio driver.

  This is beneficial because it has helped me too.

• Satellite L300 - 18 d - cannot install Win XP and Win 7

  Hi people,

  I inherited from my brother a Satellite l300 - 18 d...
  He has no BONES. When I try to put an XP installation disc I know work it crashes as soon as it gets to the first windows loading a party Executive.

  I'm trying to use the Win 7 disk, I also know the work and he gets the original file little 30 seconds loading, then it comes up a column just the letter h like that
  H
  H
  H
  H
  H

  ONLY THING I CAN THINK OF IS HARD DRIV IS GOOSED, BUT I DON'T WANT TO REPLACE SO EASILY CORRECTED.

  Hi mate

  I know that you would not be able to install Win XP without previous installation of the SATA driver.
  Another option might be changing the SATA mode in the BIOS
  Go to BIOS and change SATA AHCI compatible mode mode.
  Save the changes, and then try again to install Win XP.

  PS: it s recommended using a Win XP with at least SP2 or SP3 disk

• Satellite 2210CDT: two problems after installing Win XP

  Hello! Maby it sounds funny but I found Toshiba Satellite 2210CDT inside my closet, installed Windows XP (oem supplied with the mouse, I bought some time ago) and it works!
  The only problems I have are:
  * When the system is in hibernation, it is impossible to 'wake up' (I remmember in Win98 in this laptop there is problem);
  * I don't really have the tools provided with Win98 came with the laptop (ie.battery status and so...)

  Appreciate the help, Mike

  PS sorry if I post in a bad place in the forum, but this is my first post (I hope you can understend...)

  Hello

  Satellite 2210CDT is an ancient and you should be lucky that Windows XP runs on you laptop.
  But this unit has been designed and delivered before the era Windows XP started.
  I checked the page of the Toshiba driver and there is no drivers for Windows XP. I found drivers only for W2k and Win98.
  Unfortunately, if you use the Win XP on your laptop you must do without drivers Toshiba, tools and utilities.

  I found a utility to do Hibernation for Win98 on the Toshiba site. I think that this is a utility that is important to use the hibernation mode. But as I said, it is available for Win98.

• Satellite L300 - 03C PSLB8C - cannot install Win XP - BSOD

  Satellite L300 - 03C PSLB8C-03C01X
  I HAVE INSTALL WINDOWS XP, BUT WHEN I STAR IT SUPPORT WINDOWS XP, BUT IT SHOWS BLUE SCREN AND RESTART
  WHAT SHOULD I DO?

  You have already created several discussions on the same subject:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=170439

  Don t start new discussions, but follow the first condition to avoid the various discussions.

• Satellite L40 - no sound after installing XP

  Have downloaded audio drivers and installed on laptop but unit still does not.

  Media players gives this message:
  + Windows Media Player cannot play the file because there is a problem with the audio device. There may be a sound device installed on your computer, it can be used by a program or it is not working properly. +

  What should I do?

  Hey Kim

  I found the other thread you have already posted:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=133571#133571

  The user Jayjay has already posted a solution. Check the last assignment!

  Welcome them

• Satellite Pro A10 PSA15E: NO sound after installing Win XP

  Hello world

  I had to reinstall Win XP Home - which went well, however - now there is no sound and it says no audio device is installed. I tried to install the audio drivers on the Toshiba CD but they go as far as unpacking but then say "not installed" and Setup stops.

  I went to www. support. Toshiba.com and follow the menu to identify which drivers to download? but there are several possibilities for the
  Model A - 10 and I am not sure I have listed below models have.
  A10-S100, A10-S1001, A10-S127, A10-S128, A10-S129, A10-S1291, A10-S167, A10-S169, A10-S1691, A10 S177, A10-S178.

  I would be grateful for your advice.

  Thank you

  Andrew

  @mrafowler

  > I went to www. support. Toshiba.com and followed the menu in order to identify which drivers to download, but there are several possibilities for model A-10

  What you mean? On the European driver Toshiba page, you will find only one series Satellite Pro A10.
  Once again; Do you have a computer or a Sat Pro A10 laptop satellite A10?

  There is a driver of sound for a portable Pro A10. This is a version of audio driver Analog Devices 5.12.01.3542.
  If you are using XP SP2 please check the information provided on the page of the driver Tosh

• Satellite U300 - 11y - no sound after installing win XP, SP3 rc1

  Finally got my U300 working with XP, but I can not get the operation. The proper drivers are installed, but nothing. Hardware working on Vista, so this seems like a driver problem. I think realtek for somereason Setup is not totally complete the configuration.

  I followed the advice on
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=99567 but no luck.

  Becomes pretty nervous now, I need sound for Skype in my company.

  Thanks guys,.
  Tim

  Post edited by: ADMIN

  I have seen working on Satellite U300 WXP and well I used Skype. The sound quality wasn't the best but it works.

  Somewhere on this forum I found info on Microsoft KB888111 and KB835221 patches. This should help not working sound on Windows XP Home edition. Please check it out.

• Satellite L40 psl40e - no sound after installing Win XP

  I installed windows xp sp3 on my psl40e and can not get the sound to work. I downloaded the drivers all day and couldn't go. I installed everest and it says I have Intel 82801 GB ICH7 - High Definition Audio Controller.

  Can anyone help? Thank you.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=100688

• Satellite A80: No sound after installing XP Pro

  Hello

  Just upgraded my Satellite A80-115 from Windows XP home to Windows XP Pro SP2

  Download all the drivers for the A80 from the site and install. Everything works except for the audio driver, I have no sound coming from the speakers.

  Nothing is cut on the system.

  Realtek AC 97 Audio driver

  Tried the Patch KB888111 from microsoft but still no sound. It's driving me crazy...

  Please help me! 1

  Kind regards

  Ronald

  Post edited by: cono

  Perhaps the solution described in this thread might help:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21110&MessageID=77805

  1. download Microsoft's KB835221 hotfix
  2. Remove "Audio device on High Definition Audio Bus"
  3. install KB835221
  4. reboot the system
  5 XP automatically detects devices
  6. after that you don't need, but you can install the realtek drivers

• Satellite Pro L40 - sound after installing Windows XP SP3 driver

  Hello

  I bought the Satellite Pro L40 about 6 months ago and the speed of the laptop is too slow with windows Vista. So I decided to install an old copy of windows XP that I had purchased earlier. I updated the windows SP3 installation before installing the drivers.

  Now, all the drivers have been installed correctly except the audio driver. I downloaded the XP version of the driver on the toshiba site, but it did not work. So I though that maybe the vista version would work, so I downloaded that. But that no longer works.

  Can someone suggest a solution where I can get the audio driver to work? Preferably without having to get the reinstalled windows again.

  Please help me...!

  Thank you

  Hello

  Try to reinstall the driver for sound card for XP; Just go here-> [fo Realtek card its Driver XP | http://support1.toshiba-tro.de/tedd-files2/0/sound-20071120150900.zip]

  Hope this helps :)

  Post edited by: iSkO

• Satellite P100 - no sound after installing Vista SP1

  The machine is a Satellite P100 just more than a year, came with Vista installed. No problem until today when Vista SP1 has been automatically downloaded and installed. Now I have no sound from speakers or headphones.

  I've uninstalled and reinstalled the driver Conexant Audio Hi-Def to the latest recommended on the Toshiba site.

  I tried to restore to before the time when SP1 was installed.
  I updated the BIOS to the last on the Toshiba site.

  I pulled my hair.

  Someone at - it any other suggestions?

  It s certainly a useful information. Thanks again!

• L830 satellite - Bluetooth cannot connect after installing Win 7

  I reinstall (Windows 7 Home Premium) on my laptop PSK84V-02400UAR Toshiba Satellite L830, and install all the drivers, but after you install all the drivers, I can't connect any Bluetooth device to this tour...

  When I search using the Bluetooth window it shows in the search window and after a while ' * could not detect the remote device * ' *... Kindly help... awaitng your valuable response.

  Can you please post exactly details how you installed the software and drivers Bluetooth?
  I think that you have made some mistakes there

  Your laptop supports the Atheros WLan card. Right?
  I think that this Atheros WLan card compatible with BT as well. This means that you need to install a special driver that allows to share WLan and BT in a single module.

  This driver calls filter for Atheros Bluetooth driver package.
  Therefore, install the driver Atheros Wlan, Atheros Bluetooth driver filter and battery Toshiba BT package.

  Then BT must be installed correctly and you should be able to activate it in order to start the pairing process.