Satellite L300 - Nothing if I try to start it upward, only of the flash light battery

Similar Questions

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Satellite L300 - error if I try to create a recovery disk

  I was trying to create recovery disks for my new L300, but after a few minutes, the program stops and receive Error Messages (boot.wim is not). Yet once, I tried to create through other DVDs of brand as Philips DVD - R, Imation DVD - R, Sony DVD + r etc.
  Can you please help with that?

  I can't find the Verbatim and TDK DVD in our market closest to try these marks too.

  Hello!

  I have a Satellite L300 too and didn t have problems to create the Toshiba recovery disc. I used DVD - R Verbatim media and usually got the best experience with the manufacture of DVD and DVD - R types.

  In your case, I would try this DVD media or the TDK DVD-R discs. If you can find t he on the store closest to the computer you can also order it online. Take a look on Amazon or eBay, here, you can order these media.
  It s worth a try! ;)

  Good bye

• Satellite L300-1BV - error windows could not start

  When I try to start the laptop it know
  "Unable to start windows. To address the recovery of insert problem disc etc, but I have nothing of this
  below it I got an error message

  file: \windows\system32\winload.exe

  STATUS: 0XC000000F

  Info: the selected entry could not be loaded because the application is missing or corrupt

  can anyone help?

  Of workaround I posted in another thread, but it should work in your case too.
  Try this:

  Press F8 immediately after that the laptop has been turned on.
  Then choose the first option called fix my computer.
  Then a new window should open and there you can choose the option called Toshiba recovery.

  Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

  Goodbye & good luck

• Satellite Pro A100 - flashing light battery and no start

  Hello

  I was sitting watching a video with my daughter yesterday when five minutes in my Satellite Pro A100 suddenly stopped working - cut out completely and not be reactivated. When I tried to restart the orange lit battery eleven short blinks blinked, and nothing else has happened. The battery has been low for some time, so we always run the AC adapter. The adapter is currently connected, but there is no blue light charge as I expect.

  With the battery removed do not get the flashes orange. With the battery and power adapter, I get the flashes orange.

  I was wondering if the AC adapter was missing, and we do not have a "low battery" warning because we were watching a video. That would explain the lack of charge indicator. When we get the flashes orange, we get this from the small amount of residual charge of the battery.

  Can anyone back this idea up - or anyone who can interpret the error code?

  Thank you

  Keith

  Hey Buddy,

  This means that you are able to start your computer or battery or AC/DC adapter only, good point?

  Well, theoretically it might be possible that AC/DC adapter is defective.
  When you try to start your laptop, nothing happens, right?

  In the best case, you know a friend who has the same AC/DC adapter, so you can test if the AC adapter is defective or not. Otherwise a professional diagnosis of an ASP would be necessary.

• I want a program starts automatically with the start-up. but only in the status bar. Now, it creates its own screen. How to do?

  Hello

  I have a program now that starts automatically at startup.  Good.

  But it creates is own screen that I have to close it on.

  How can I prevent this happening and start automatically start; but only in the status bar?

  Any help will be greatly appreciated.

  / GE

  Is that what you want to do? - http://superuser.com/questions/495185/how-can-i-make-a-program-that-runs-on-windows-startup-automatically-minimize-clo gives general information and use uTorrent for example.

  This particular program?

  More info here - http://freewindowsvistatutorials.com/makeProgramsStartMinimizedOrMaximizedInWindows7.php

• Satellite L300 - nothing happens if I start the recovery disk

  I have a laptop of 1AS L300 Satellite equipped of Vista and I want to restore configuration as when purchased.

  I created 2 DVD restore discs when the first program installation.
  When I boot from the DVD drive with restore discs, I get to choose the language, then that's all. When I click on 'next' I can't go any further. I can move the mouse, but that's all. I tried boot the system by pressing F8 and then repair Windows but only get a black screen and nothing else.

  Is there anything else I can try to format my drive back to factory settings

  Hello!

  I had a similar problem on the first time I used my recovery disks. They stopped at and I can't complete installation.
  Anyway, I started from a normal Windows XP disk to format the drive HARD integer first, and I deleted all partitions. Then I booted from the disc of recovery again and it worked now! :)
  Maybe it works for you also. It s worth a try!

  Last point but not less perhaps the recovery discs are rough or something else. You can create the floppy again?

  Good bye

• Satellite L300-1F8 - Win 7 does not start

  I bought my L300 Satellite a few days ago.
  I installed the ot Windows 7 RC version. This drug was OK until yesterday.

  When I started it, he showed the legend of Toshiba and at the moment he is supoused start loading the operating system it starts to beep.

  I tried to Flash the BIOS with the latest version released.
  After I did this everithing was normal once again, but today when I started it, the same problem apeared again.

  Can someone help me?
  Is this really a problem with the operating system, or is this a hardware problem?

  Hello

  > When I started it, he showed the legend of Toshiba and at the moment he is supoused start loading the operating system it starts to beep. I tried to Flash the BIOS with the latest version released.

  The whole story is really strange to me.
  How do update you the BIOS if you were not able to start the operating system?

  Usually the BIOS can be updated only when running Windows operating system.

  You ask if this could be a problem software or hardware; to be honest I m not quote sure why the laptop beeps but I think you should test this new with OS preinstalled Toshiba. Take the recovery disc (that you created if all goes well before install you Win 7) and installed the Vista again to check if this issue would be displayed.

  In addition, the Win 7 is still a beta version, which means that there is still a lot of bugs that could affect the functionality of the laptop.

• Try to start Windows Defender and get the error message 0 X 800705464

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Windows

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I don't think this is the correct error code - check again.

  What security software you have on your system (it - name and version)?  Some disable Windows Defender in installation intentionally to avoid any conflict, so you won't have a problem, but simply a case of using a product that disable Defender (and Defender must remain disabled in this case as long as the other program is installed).

  Here's a troubleshooting article on how to fix Defender in Vista Ultimate: http://support.microsoft.com/kb/555962.

  To repair the Defender:
  Start - Control Panel - programs & features - Windows Defender - click on "Click here for support information" and choose repair.

  Update (update) Defender:
  Start - Control Panel - programs & features - Windows Defender - change - update.

  If the above does not work, try Windows Defender discussion groups: http://www.microsoft.com/athome/security/spyware/software/newsgroups/default.mspx.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you try to start Googe Earth I get the message, "Directx mode not supported.

  Dell Inspiron 5100 laptop, running Windows XP pro service Pack3, Directx9 upgrade enduser DURATION 11, latest video driver from Dell, 32-bit color.  Uninstalled, re installed Google Earth several times.  Cleared cache.  Off 'atmosphere' at GLmode which loads only certain borders of yellow color.  Control internet, found many people having the same problem.  No solutions found for the moment.

  It's the Windows 7 Forum, the XP Forum at http://answers.microsoft.com/en-us/windows/forum/windows_xp

  Can you use this option, "Start Google Earth in OpenGL mode", rather than any option of DirectX?

  DirectX: Description of the DirectX Diagnostic tool
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;190900&FR=1&PA=1&SD=HSCH

  You can also try here.

  http://productforums.Google.com/Forum/#! Forum/Earth

• Satellite L300 - wireless not working do not at all

  Hello world

  IM new here and my name is Jodie. My husband and I bought new computers laptop a few weeks ago, Satellite L300.

  On my husband a wireless just stopped working, the switch is on but no lights appear. I tried FN and F8 says the Wireless does not work. I checked in the device under netwrok Manager cards to see if he said the same thing as mine and the wireless adapter is missing? It's the Atheros AR5007EG wireless Netwrok adapter.

  Can anyone help? Cannot believe what has happened and they are only 2 weeks :(

  Thank you guys
  Jodie

  Hi Jodie!

  Have you tried to update the driver for wireless network? On the Toshiba WLAN portal, you can find the most recent version that should work on your laptop:
  http://APS2.toshiba-tro.de/WLAN/

  I'm not sure, but you should look in the BIOS. Perhaps there is an option if wireless LAN where you can enable or disable WLAN.
  Check it!

  In addition, I recommend also updated the BIOS, and if nothing can help launch you the Toshiba recovery disc. You will receive the factory settings where everything should work fine.

  Good bye

• Satellite A200 - 1 M 4 do not start and black screen

  I really hope that someone can help you.
  After 15 months my Toshiba A200 seems to have given up the ghost.

  I tried to put it on today and although the blue LED on hold came and the orange clear hard disk there was no other sign of life.
  I tried and tried, but it just wouldn't start and the screen did nothing but remains black.
  I tried to take the battery for more than 30 minutes, pressing F4 - but nothing.
  I have no memory material inserted or additional cards as a webcam. Everything worked fine until now.

  I'm not very technical so you know how to help, then please explain as simply as possible.

  I really appreciate any help you may be able to offer!

  > I tried to take the battery for more than 30 minutes, pressing F4 - but nothing.
  Why try to press F4?
  However, remove the battery, disconnect the AC adapter, wait up to an hour and then reconnect the battery and the AC adapter.

  If the laptop doesn t boot I think that the motherboard must be replaced. Ask your local ASP for help. They can order and swap the motherboard.

• Satellite M40-129 BSOD and does not start correctly

  Hi again.

  I was working on my computer since my last question, but (almost) nothing has changed.
  The problem:
  My laptop is booting, but only on very rare occasions.
  What can happen:
  -l' screen stays black (almost 50% of cases)
  -L' splash screen (Toshiba - in touch with tomorrow) becomes visible and nothing happens then (40%)
  -Notepad starts "correctly" (10%)

  If the notebook starts correctly there are 2 options:
  1st: I try to start Windows: it crashes with a blue screen with the nice request an update of the BIOS.
  2nd: I boot SuSe Linux: EVERYTHING WORKS!

  I tried to update the BIOS the traditional way, although it is difficult to get it started it runs until shortly before the end and restart the computer.
  I don't see any confirmation screen as Im used to.

  What I assume, that the associated BIOS startup problem.

  I read a method for recovering the BIOS with a floppy disk, where you copy the BIOS. ROM disk and start the computer with the disc.
  My question is: is this also possible with a CD (have no floppy drive), if yes: how to proceed?

  I wanted to give a point of service of Toshiba, but if they can't fix it, I always have to pay 50 euros. I have to pay money to get my BIOS restored, but the service seems to be just a "-delivery service" the real point of service and I would like to speak with a qualified person, first :)

  > I read a method for recovering the BIOS with a floppy disk, where you copy the BIOS. ROM disk and start the computer with the disc.
  > My question is: is it possible with a CD (have no floppy drive), if yes: how to proceed?

  Hmm, you said that you have already received the traditional BIOS files from the ASP in your country. Then maybe you should take a look at this Toshiba document:

  [How update the BIOS on my Toshiba laptop and where can I get the latest version of the BIOS for my machine? | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

• Satellite L300 - impossible to go from Vista to Win7

  Hello

  I have a problem I bought the Satellite L300 (windows vista family premium was installed, I had to buy the upgrade to windows 7 in toshiba which I did and installed without any problem at all.)

  But now after using the cause of recovery, I had a virus on my computer that he returned to windows vista.

  Now when I try to run the upgrade cd 7 it gives me a message (the template does not support windows 7 upgarde) how could this be, since I already had on this system before?

  Can someone help me to fix the problem of the tp or give me an explanation on why sound what do I do?

  Thank you.

  Hello

  I got a Toshiba document on upgrading Vista to Windows 7:

  + Windows 7 upgrade: step by step Upgrade Guide +.
  http://APS2.toshiba-tro.de/KB0/TSB9902P60000R01.htm

  and

  + Which updated the path exists since Windows XP, Windows Vista and Windows7 for Windows7? +
  http://APS2.toshiba-tro.de/KB0/TSB9C02RG0001R01.htm

  Here also some useful information of Toshiba U.S. on Win 7 upgrade:
  http://us.Toshiba.com/Windows7-upgrade/

  Check this box and post comments!

• Re: Satellite L300-214 PSLB8E - update Bios broken link

  I had the laptop Toshiba Satellite L300 - 214 PSLB8E.

  Since a few days, I checked the Web from Toshiba site against Bios upgrade and found a new bios, finally, the link is broken. He points to http://support1.toshiba-tro.de/tedd-files2/0/bios-20090430112041.zip; I checked http://support1.toshiba-tro.de/tedd-files2/0/ and couldn't find any close file of that date (30/04/09).

  Can someone indicate something?

  Hi mate

  I found some similar discussions on the broken links to the BIOS update and I think that there is a server problem I think you should try to download the BIOS in the next few days

  See you soon