Satellite L300 poster error 0xc000000f

Similar Questions

• Satellite L300 and error 0xc000000f

  I had the windows did not start error. A recent hardware or software...
  Say that you need to repair Windows installation disc.
  File: \windows\system32\winload.exe
  Status: 0xc000000f
  Info: the selected entry could not be loaded because the application is missing or damaged.
  Enter = continue
  ESC = exit

  I can't start mode without failure or something like that. I have not upload anything recently or change anything. Just tried to start one day and got it. I have only the option of F2 or F12

  OK, so I used my restore disc and went through "windows is loading files" up to the end of and then Microsoft corporation. It is not even asking for the language. Then nothing. Black screen with white cursor. Nothing helps. The cursor moves when controlled with mouse pad, but that's all. I can't use ctrl + alt + del or something else to get out. Please can someone help me with this. I have some documents that I'd rather not see it go. Are there other options apart from resetting to the factory settings?
  Thanks in advance for your help.

  > Are there other options apart from resetting to the factory settings?
  If I've understood your right to post you cannot install recovery image.
  What happens when you press F8 at startup? You can enter advanced startup options?

  If you have some important documents stored on the HARD drive and then connect as another external to the other PC then you can all copy them to the PC.

  What you can do?
  Try to get somewhere Microsoft installation disc to see if the same problem occurs again. If you will not be able to launch the installation of operating system with this disc of facilities I assume that HDD is troublemaker and you must test the features with the other.

  Maybe some friend of you has a 2.5 HDD so you can use it for testing purposes.

  In the end, I have to say that most strange thing in this whole thing, is that you cannot use same disc of recovery for the installation of the OS. For me it is the best proof that there must be some hardware problem.

• Satellite L300-EZ1502 - error writing to CD/DVD

  I have a Satellite L300-EZ1502 with Windows Vista ultimate. He has a stack of UJ-880AS * a DVD-RAM.

  Whenever I try to write a CD or DVD, there is, a mistake in the middle and the judgments of CD/DVD writing. I had to throw away dozens of CDs and DVDs because of this error. I tried different types of CD/DVD as Philips-DMS-Princo-Benq, but I got a write error. Sometimes it ends successfully, but do not know why the reason.

  I searched for the driver, but it is correct and working properly. I took the laptop to the official service, but they say he doesn't love all types of CD and nothing to to that.

  Have you ever imagined such a problem. You have a solution?

  Hey!

  In my opinion it s correct that not every disc is compatible with all brands of disc. I had the same experience and so I always use DVD - R Verbatim or TDK discs. Never had any problems with both types. Check this box!

  I recommend also to delete upper and lower filters in the registry. Just follow this work around Microsoft: http://support.microsoft.com/kb/314060

  If you have any other questions, please let us know mate. ;)

• Satellite L300-1BV - error windows could not start

  When I try to start the laptop it know
  "Unable to start windows. To address the recovery of insert problem disc etc, but I have nothing of this
  below it I got an error message

  file: \windows\system32\winload.exe

  STATUS: 0XC000000F

  Info: the selected entry could not be loaded because the application is missing or corrupt

  can anyone help?

  Of workaround I posted in another thread, but it should work in your case too.
  Try this:

  Press F8 immediately after that the laptop has been turned on.
  Then choose the first option called fix my computer.
  Then a new window should open and there you can choose the option called Toshiba recovery.

  Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

  Goodbye & good luck

• Installation of Satellite L750 poster error recovery

  Trying to get back to the factory settings but displays ERROR: 10-FC12-0003. Help, please

  You have posted another thread here:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=256003
  the laptop was not able to start the system, I think that this problem could be linked to this error message.
  Possibly the HARD drive is faulty or something wrong with the memory

  Are you able to boot other disks like Win XP, Vista or Linux?

• Satellite L300-1AS - error when creating a recovery disk

  I am trying to create disk recovery for Sat L300-1AS,
  I tried a number of different DVD discs of high quality on DVD - R / DVD + R, but each time when the system checks the data, I get an error message 02016F - 3 c 00000000

  What am I doing wrong please help as frustration is really starting to kick now

  Thank you

  Hello

  Die get the error not fully compatible DVD disc.

  I created a recovery disk using the TDK DVD-R disc. Some people, he suggested too.

  I think that worth a try!

  Welcome and good luck

• Satellite L300-1AS - error PXE - boot error - will not boot from USB

  Startup error - error PXE-L300 1AS - will not boot from USB

  I recently bought a new HD to replace the original that my laptop takes an hour to load.

  I put the new drive hard at in the BIOS setting, I chose to boot from USB... USB is recognized as it appears on the screen of the BIOS. I disabled the LAN option as it gives me PXE error... I think that the USB files are not read. as I handed the old HD and attached to boot from USB but it just goes to the start screen.

  I thought that perhaps I bought the wrong HD, but a new appeared on the BIOS setting... I'm a bit confused and would appreciate it if someone could point me in the right direction...

  Any help or advice will be appreciated.

  Thanks in advance.
  Abul

  New HARD drive has nothing to do with it. Problem must be your USB key.
  In your ad you didn t wrote what is on it, and we don t know if USB can operate as boot device or not.

  I put t know what OS you want to install right now but original recovery DVDs or use Microsoft installation disc and install Win7 32 bit. I ve installed on friends L300 and it works perfectly.

• Satellite L300 and error recovery

  Hi all

  When you use the recovery disk I get the following error: HDD01 is missing.
  The laptop was fine before recovery

  See you soon

  Rob

  Love all here: _
  If you are not able to recovery the laptop because your HDD recovery option doesn't work more or because you t n t have the recovery disc, then you have two options;

  You order a new Toshiba Recovery disk, or you use the original Microsoft disc to reinstall the Windows operating system.
  But there is little difference between the Toshiba recovery disc and the disc of Microsoft;
  TOSHIBA disk contains all the tools and the driver Toshiba but MS disk contains only a Win OS and you will have to download and reinstall also the tools and the driver of Toshiba.

  Good bye

• Satellite L300-20W - "error loading operating system"

  When I turn on my laptop, the Toshiba screen charge then it will a blank black screen with a white underscore flashing in the upper left.

  A few seconds later this message appears in the upper left corner "error loading operating system" I watched v online on how to solve this problem, but all that happens is complicated jargon.
  Anyone know how I can remedy this in simple terms?
  See you soon

  Hello

  I can't say with certainty what may be the problem but maybe HDD (hard drive) is a troublemaker.

  Start your laptop and press F2 to enter the BIOS settings. Check if the HARD drive is recognized and registered properly on the page. Load the settings by default using F10, then restart your laptop.

  The same thing happens again?

• Satellite Pro L300 PSLB1A: Recovery disk doesn't work no-error 0xc000000f

  I get error 0xc000000f on restart and if I try the recovery disk I get error error: 10-FC12-0241
  operating system is vista professional and toshiba laptop L300 PSLB1A - 02S 008

  Hello

  You mean that you cannot start the laptop using the Toshiba Recovery disk you created?

  Go into the BIOS and check if the CD/DVD drive is recognized. It should appear on the first page of the BIOS.
  If the CD/DVD drive is not listed, then you should set the compatible SATA mode and must save the changes.
  After this attempt to boot again from the recovery disc.

  I also searched on the Toshiba driver European page for info and found a few details;

  There is an update of firmware for CD/DVD TS-L633A and TS-L633P player.
  This Firmware solves "sometimes not able to writing on DVD + R media'.
  The problem occurs only on DVD + R media, other media type have no problem.

• Satellite L300 - error 0x800423F3 system restore

  System Restore stopped working 'transient' error 0x800423F3 on my Satellite L300 series, now lost the function of brightness FN key?

  Solar protection

  Hey,.

  I m confused what do you mean with system restore? Toshiba Recovery disk recovery facility or what exactly?

  The FN keys are controlled by value added and Flash Cards Support utility package. These two tools, which you can download here:
  http://EU.computers.Toshiba-Europe.com

• Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

  When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
  Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

  But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

  I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
  I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me

  Hello

  Satellite L300 - 17L belongs to the PSLBCE series.
  I chose this model number and found exactly the same energy saving that you tried to install.
  So I guess that you have chosen the right Power Saver utility for this model of laptop.

  But did you also install the common Module?
  This software must be installed first before installing other tools.
  Update you the Win XP for the State?

  Check it!

• Error messages when you try to retrieve satellite L300 Vista

  I have a Satellite L300, which keeps freezing upwards so when I tried to do a recovery I got an error message 10 D 045 fa12 and when I tried to completely erase the disk, I got an error of the FFE 20 045D

  This unit was sent to toshiba for repair and technicians said there was nothing wrong with the unit, but my research tells me there is probably a fault requiring the replacement of the HARD drive - so now that my warranty just expired do - what I do? Can I still take the unit for repair since the issue of original warranty has never properly addressed? or is there a way I can fix the error?

  If the warranty has expired, this can be a problem now, but I wonder why you did not react immediately when you saw that there is a problem.
  On this forum, you can find several threads with the same problem and if you have time try to read this that people writing here.

  I can imagine there is problem with HARD drive, the HARD drive can be replaced but you can do it alone.
  It's really not a big deal.

• Satellite L300 - recovery ends with the error message: 10-FA1Z - 045D

  My Satellite L300 is 3 months old and one a few days ago I resorted to the use of the 4 recovery DVDs.
  After several hours, I get an error: 10-FA1Z - 045D message. I made 3 attempts and get the same message every time.

  Any suggestions?

  My only suggestion for that is you should contact the closest service provider authorized as soon as possible. I am not sure what can be the problem, but it must be HARD drive issue or a problem with the recovery image.

  In both cases, you will get free and if necessary service service can order new DVD of facilities of recovery for you.
  Do not wait too long and vase your time with her. Call the nearest service tomorrow and talk to them.

• Satellite L300-1BW - 19 on CD/DVD drive error code

  Hello people, Satellite L300-1BW my wife lost her DVD player - manager of material properties gives the following error:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I tried to uninstall the DVD driver, then reboot to let her re - install, but it still comes back with the same defect :-(

  Any ideas anyone? ?:|

  Hello!

  Try to delete upper filters and lower, as in this Knowledge Base article Microsoft has offered:
  http://support.Microsoft.com/kb/314060

  (1) run Regedit (start > run > Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye