Satellite L300 PSLBGE screen turns white after a while.

I * model Toshiba Satellite L300 PSLBGE * and I have never seen this problem before.
I use my laptop since last year in fact my laptop screen turns white after spending some time on it, usually after 10-15 minutes...

sound also stop here and the only solution is to reboot, after that reboot it still works well, but after a while once again its screen turns white.

Please help for this problem

Post edited by: bharatjaiswal5

Hmm have you tried to reinstall / recover the laptop to see if it helps to solve this problem?
In my opinion you should try it because it could be a problem in the system.

Otherwise if new system installation / restore does not help you, it could be a malfunction of the equipment.

Tags: Toshiba

Similar Questions

  • Why the Satellite L300 laptop screen stays white?

    Why the Satellite L300 laptop screen stays white?

    Hello, I have a Toshiba Satellite L300-29U over purchase, turn when he was first an hour about it looks a whole without problems, then the screen was blank. Feed again in a couple of times more hours after rest and passes him still takes some time to operate.

    What is your recommendation?

    Thank you for your response.

    Post edited by: Sams

    Hello

    Why?
    Who knows what have you that your screen is white?
    My screen is not white it shows everything correctly.

    The same white screen will appear on the external monitor?
    If so, then this problem may be related to faulty graphics card, if no, your laptop computer s display can be defective

  • Satellite A100-812: screen brightness does not not & screen turns off after a while

    Some power management features do not work after a bios update (5.90).
    The display brightness can be changed in the power manager, or the top menu system. In the power manager, the cursor can be moved, but the brightness is not set. Toshiba menu system appears to hang on trying to change the brightness with F6 - F7 and won't move the cursor.

    In addition, the screen does not turn off after the set amount of minutes in the power manager.

    What is going on? How can this be repaired?
    Thanks in advance.

    Hello

    Some questions; Why you have updated the BIOS?
    Are you sure you used the right BIOS?

    In my opinion you shouldn't t to update anything if the laptop works properly!

    However, try to access the BIOS, set the default settings and save the settings before exiting the BIOS.
    If this does not help, I would pick up the laptop with the Toshiba Recovery CD.

    Good bye

  • Satellite A100: Screen turns off after a while of no action and cannot be reactivated

    Hi all
    I'm after a bit of advice/help. I have a satellite A100 & after its been on during an extended period with no keyboard (like DVD burning), the screen is empty. It does not matter the keys on which I support on I can't get it back. The only way to get out of what I've found is to reboot the machine.
    Any help would be greatly appreciated
    Thank you
    Gary

    Hello Gary

    Try please install the latest display driver, you can find on the download page of Toshiba. It is also recommended that you update the BIOS with the latest version available.

  • Satellite P200 - 10G screen turns white cause driver

    I was gifted a Satellite P200 - 10G, works great so far, only if I try to install the graphics driver (Intel 945 G), both that of intel and Toshiba one my screen goes black on each Windows (XP, Vista, Win 7, Win 10). It works with the standard Win drivers (except Win7).
    Any ideas why this is happening. And maybe a workaround?

    Regardings

    mindscraper

    If I understand the question, the laptop works properly using the standard Windows graphics driver that is part of the system and standard resolution (I guess that 800 x 600 or 1024 x 768 or something like that).

    But after the installation of the driver graphics card, black laptop display changes and nothing is visible on the internal display. Right?

    This happens also in the external screen/monitor?
    Check it out

    But to be honest, the question looks like a malfunction of the graphics card.

  • Screen turns off after a while

    Hello, I have a z585 Ideapad. When I turn on the laptop it starts booting, I see the Windows loading screen but then the screen goes all white. I tried to go into the BIOS, but it's still blank it too. Also when I put in a disc of Windows and it starts to load, after a few seconds it will still virgin. How can anyone has any ideas I fix?


  • Satellite M70 - 340 - the screen turns black after that charge BIOS

    Satellite M70 - 340 screen turns black after that BIOS loaded. Please help

    Hi Totius,

    This means after the Toshiba BIOS screen, nothing happens or you tried upgrading the BIOS? Maybe you can explain that it still a little more detail.

    The problem is in this case you can t a lot because this problem of material based on s.

    You can try to remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start your laptop.

  • 11 - e010nr after the signature on the photo and a few icons appear and then the screen turns white and reappears

    Laptop TouchSmart 11, e010nr 11, windows 8, no error message. I can Ctrl/alt/del and obtain the lock... the Task Manager screen. This screen works but nothing else

    Hi danny61,

    Just to clarify , when your screen turns white and reappears, the icons reappear also? and do you not see that set the desktop background or the taskbar? that it could be as simple as restarting the Explorer process in the Task Manager.

    If you can update me if I can see how I can help

  • Satellite L300 PSLBGE Vista 64bits - WLan disconnects at random times

    Hey,.

    I recently bought a Toshiba Satellite L300 (PSLBGE series) computer laptop. It has 4 GB of RAM, so I installed Windows Vista Ultimate 64 on that.

    Problem is that on the Toshiba site there are only drivers Vista32 and with those that I found online, the wireless adapter works, but it keeps disconnecting at random times. It works fine until it stops randomly, there is no message "Network cable" unplugged

    He let go the IP address but I tried to keep a 'ping t' on and it gives "the request exceeded" for a period of time and then it comes back.

    What should I do?
    Thank you

    Hello

    First of all, it would be interesting to know what you have exactly the WLan card.

    I know you could use some WLan drivers from this Toshiba WLan page:
    http://APS2.toshiba-tro.de/WLAN/

    In addition, I recommend turning off some options that affect the WLan in energy saving feature.

    First turn off in energy-saving WLan card properties. (device-> card Manager WLan-> properties-> energy saving)
    Then check the power options of Vista-> wireless adapter settings > power save Mode

    Here this Toshiba doc could be useful for finding these settings:
    http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

    Finally and above all the Advanced tab in-WLan card-> properties > Device Manager contains some useful WLan settings that might increase WLan performance

    Welcome them

  • Screen turns off after the opening of the session. The mouse cursor only appears

    Don't know where to post this, but here's my problem.

    I have a Dell laptop with VISTA professional who has worked perfect for 8-9 months. Since the beginning of December I started having this problem haunting log-in where to provide the user name and password, the screen turns white (black) and I see is a mouse cursor. Nothing else appears. I can get to the hostel Monsignor task by doing a Ctrl-Alt-Delete, but a stop or restart is not the problem. I tried the safe mode or VGA mode without result. The only thing that seems to work is time. If I leave the system at the prompt to logon for 5-10 minutes, I can then connect you ok but this delay is unacceptable. It's as if there is a service that needs timeout? Any ideas on what may cause this behavior?

    The behavior is also described by others here and here but none of the suggestions have solved the problem for me.

    Appreciate any help. Thank you!

    -Jetland

    You wanted to let you know the final outcome of this problem. I spent two good months of fighting through this problem and try all of the advice given. The problems have persisted. Beyond the suggestions here, there are pages on Google pages on this topic is delicate balancing sifting through the "answers".  So far, no one, including Microsoft, has been able to identify the problem or to locate a formal resolution. After having satisfied this during a road trip in 2 weeks, I have downgraded to Windows XP and wait anxiously for the release of Windows 7.

    -Jetland

  • P2412H - displayed briefly and then the screen turns white.

    Hello

    I got a pair of monitors of P2412H little more 3 years, bought from a dealer - I don't have tags and monitors say manufactured in September 2011 (so I think that, apart from any warranty).

    This morning one of them has failed - it displays briefly, then the screen turns white.

    Manual test:

    1 unplugged every wire and power button which is held for 15 seconds.

    2 reconnect the power cord.

    -Switch will blue

    -L' initial Dell boot screen is displayed on the screen for less than a second.

    -L the screen turns white.

    -Stays blue power button

    3. press one of the control buttons

    -Nothing happens

    4. disconnect the monitor

    5. connect the monitor to on PC with Windows connected using DVI.

    6. connect the power cord

    -Switch will blue

    -L' initial Dell boot screen is displayed on the screen for less than a second.

    -L the screen turns white.

    -Stays blue power button

    I also tried to reset the monitor according to the instructions of the manual by pressing keys 1 and 4, but as the monitor does not appear, I couldn't see anything.

    The monitor did briefly revived properly after one of my attempts back manually, but the after turning on and the new to check if the problem itself had set the monitor returned to the not displaying no not again.

    Can anyone help or point me in the right direction on how to fix it?

    Thank you

    * UPDATE *.

    Disassembled the monitor I've used this as a guide to youtube to open the monitor the safely:

    cs_setInnerHtml ('video_aebd897a-01ed-42eb-a8c5-b3b6ecee6556', ");

    Inspect the circuits printed for all the obvious problems such as cracked soldering or fried capacitors.

    Could not see the obvious problems... you realign a couple of back vertical capacitors where some of them were in sharp corners appeared to be very close together as a result.

    Back together carefully.

    Backwards and now it works very well for 48 hours.

  • After the update automatic, could not load desktop under the screen turns off after logon

    Original title: computer running Windows 8 will not correctly restart after automatic updates & close

    I have Windows 8 my computer does not start correctly after it has automatically closed for the automatic updates last night. When I turn on the computer I can connect as user, however once I do it says welcome and the screen turns white. The only thing visible is the cursor if I move the mouse. There is no Apps and I can't get to my desk or anything else. I tried to restart again and press F8 and nothing. However, I can bring up the Task Manager, but that's all. Help, please.

    Hi Patricia,

    I understand that you get a black screen after that it was closed automatically for automatic updates. It might be difficult when things don't work the way it should be on your computer. This problem might have occurred because of the conflicted with the system files update or could be a problem with the display card drivers may be due to the virus/malware infection.

    Many users complain about the issue with a black screen to logon Windows. Microsoft has not yet determined the exact cause of this problem.

    However; I suggest you to please follow the steps suggested by Scott Atk began August 30, 2014 in the following link and check if this can help:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

    Please answer us on the State of the question to help you further.

  • Can not turn on the monitor on the Satellite once the display turns off after 10 min

    Hello..

    I have a problem with my laptop...

    When the screen turns off after 10 minutes, it no longer lights!

    I move the mouse, try typing on the keyboard, but it does not work...

    to activate the display again once I should close the lid for the hibernation, then open it again!

    I hope that you will help me @_ @!

    Hello

    Check it please http://support.microsoft.com/kb/917332/en-us
    To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

  • Re: NB200 - making noise and the screen turns white

    Hello

    My laptop makes the high pitched noise and the screen turns white. Please help with this question.

    Thank you

    Hello

    It is especially as this problem with the inverter. She is, die, and made a noise of pitch. Try to connect the external monitor and check if it is displayed.

    Welcome them

  • Satellite L300 PSLBGE - Win XP - FN does not work

    Hello!
    I just installed Windows XP (sp3) on a satellite L300 PSLBGE by Toshiba... and the FN key does not work.
    At the moment I have to activate bluetooth... but FN + F8 does not work.

    What can I do? I installed Hotkey, save energy and controls (1.0.0.8)...

    FN still does not work. FN + F3 does not activate the option to sleep...
    FN + F8 does not Bluetooth... FN + F6 and Fn + F7 to control brightness... nothing to do.

    Am I the only one having this problem?
    There is no updated BIOS... and it's very frustrating.
    If I press FN the Green led appears under tension... that there is no problem about the keyboard... What can I do?

    I absolutely have TO activate bluetooth... but if I press Fn + F8 it does not work! I want to read someone who have this laptop and told me "I have your satellite L300 PSLBGE 1 b 1 and my bluetooth and my FN button works with Windows XP!" ... maybe he could help me :)

    Thank you very much
    Tier

    Hello

    You need to install the common Module from the Toshiba European page and the FN keys will work!

    Check this box

Maybe you are looking for

  • Need BIOS 1.2 for Satellite 1410 303

    Hi all Toshiba Satellite 1410 303 users. I'm having a problem with my video card bios.My computer's DMI system Version PS141E - 0502 X - VIDEO adapter nVIDIA GeForce4 420 Go (Toshiba), The victory of Bios 1.40 toshibas page does not work for me.So, i

  • Can I have "PnkBstrA and PnkBstrB" under the list of exceptions in Windows Firewall?

    Original title: Firewall exceptions Before we begin, I would like to thank those who helped me in the past and as it may seem, I ignored, I tend to use the internet services and e-mail in a chaotic way, but if I forgot to answer or acknowledge a cont

  • Windows 7 screen saver problems

    My screen saver does not work correctly. After I got the settings, the saver will start and run for a few moments and close. A while later it will restart and stop again. It could be hours before it starts again. I have reset all settings several tim

  • Problesm with printing on a printer wireless

    Title: Please help my laptop with my wireless connection, I have a laptop with windows 7 and I am trying to connect wirelessly to my ' kodak esp7 printer all-in-one ' and while the printer is turned on, the wifi light is on and the printer says it is

  • Functions of time series

    I added a time series measured in SPR Year ago sales = there is ("Business Analytics" "." ") Sales facts ".» "The sale $", "Business Analytics". «Time hierarchy ".» ("" Exercise ", 1). If I shoot "Sales there of the year" in the answers, it takes for