Satellite L300 PSLBGE - unknown device in Device Manager

Similar Questions

• Re: Satellite 5200 701: unknown device in Device Manager.

  Hello.

  It WinXP Pro + SP 3.
  In the display devices, such as an unknown device manager. Try all of the pilots, who were on a disc with the laptop, nothing helps. Give the solution!

  I still use Windows XP Home with Service Pack 2 and I'm really happy with it. If you have some problems with SP3 remove and continue to use Windows XP Home with Service Pack 2 only. Satellite 5200 is quite old but very nice laptop. Make sure that the laptop works fine with SP2 and you have an application of good-antivir.

  Simply to operate Satellite 5200. I noticed that many people have reported on various issues after installing SP3. Exactly the same thing with Vista SP1.

• Satellite L300 PSLBGE Vista 64bits - WLan disconnects at random times

  Hey,.

  I recently bought a Toshiba Satellite L300 (PSLBGE series) computer laptop. It has 4 GB of RAM, so I installed Windows Vista Ultimate 64 on that.

  Problem is that on the Toshiba site there are only drivers Vista32 and with those that I found online, the wireless adapter works, but it keeps disconnecting at random times. It works fine until it stops randomly, there is no message "Network cable" unplugged

  He let go the IP address but I tried to keep a 'ping t' on and it gives "the request exceeded" for a period of time and then it comes back.

  What should I do?
  Thank you

  Hello

  First of all, it would be interesting to know what you have exactly the WLan card.

  I know you could use some WLan drivers from this Toshiba WLan page:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, I recommend turning off some options that affect the WLan in energy saving feature.

  First turn off in energy-saving WLan card properties. (device-> card Manager WLan-> properties-> energy saving)
  Then check the power options of Vista-> wireless adapter settings > power save Mode

  Here this Toshiba doc could be useful for finding these settings:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  Finally and above all the Advanced tab in-WLan card-> properties > Device Manager contains some useful WLan settings that might increase WLan performance

  Welcome them

• Satellite L300 PSLBGE XP - How to activate Bluetooth without using FN + F8

  Hello!

  I just install WinXp on a satellite L300 PSLBGE by Toshiba... and the FN key does not work. At the moment I have to activate bluetooth... but FN + F8 does not work. What can I do? I installed Hotkey, save energy and controls (1.0.0.8)... FN does not work and the Bluetooth is not activated.

  I tried all the possible stack driver bluetooth... the answer is 'bluetooth is not ready' or 'connect the bluetooth device' (I have the Italian version... perhaps that the translation is not perfect...). Is there a work around to activate the bluetooth? Thank you!

  Hello

  I already said how to get the FN keys work in Win XP.
  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=142403&

  As I said you need to install the common Module of the Toshiba page European and FN buttons won't work!
  In addition, you need to install battery Toshiba BT to get the BT working on your laptop.

  But; Are you sure that books supports BT 100%? What L300-xxx is this?

  Check this box

• Satellite L300 PSLBGE screen turns white after a while.

  I * model Toshiba Satellite L300 PSLBGE * and I have never seen this problem before.
  I use my laptop since last year in fact my laptop screen turns white after spending some time on it, usually after 10-15 minutes...

  sound also stop here and the only solution is to reboot, after that reboot it still works well, but after a while once again its screen turns white.

  Please help for this problem

  Post edited by: bharatjaiswal5

  Hmm have you tried to reinstall / recover the laptop to see if it helps to solve this problem?
  In my opinion you should try it because it could be a problem in the system.

  Otherwise if new system installation / restore does not help you, it could be a malfunction of the equipment.

• Satellite L300 PSLBGE - Win XP - FN does not work

  Hello!
  I just installed Windows XP (sp3) on a satellite L300 PSLBGE by Toshiba... and the FN key does not work.
  At the moment I have to activate bluetooth... but FN + F8 does not work.

  What can I do? I installed Hotkey, save energy and controls (1.0.0.8)...

  FN still does not work. FN + F3 does not activate the option to sleep...
  FN + F8 does not Bluetooth... FN + F6 and Fn + F7 to control brightness... nothing to do.

  Am I the only one having this problem?
  There is no updated BIOS... and it's very frustrating.
  If I press FN the Green led appears under tension... that there is no problem about the keyboard... What can I do?

  I absolutely have TO activate bluetooth... but if I press Fn + F8 it does not work! I want to read someone who have this laptop and told me "I have your satellite L300 PSLBGE 1 b 1 and my bluetooth and my FN button works with Windows XP!" ... maybe he could help me :)

  Thank you very much
  Tier

  Hello

  You need to install the common Module from the Toshiba European page and the FN keys will work!

  Check this box

• Re: Satellite L300 - peripheral unknown in Device Manager

  Hello

  Satellite L300 OS - Vista 32

  I installed again software to use the USB port to connect the Council and this Council during this installation program that some things went wrong and all my USB port does not not or does do not at all...

  When I checked the Device Manager it shows like any other device-> unknown device...

  I have install the Toshiba download chipset and still I can t solve the prob...

  my USB all the port does not...
  My WiFi is not working...
  my camera does not work...

  rest of all work, I guess that any suggestion to solve this problem?

  Hello

  Would it be possible that the 3rd party software that you have installed to use the USB ports has tangled up the whole system?

  The driver for the unknown device that appear in Device Manager can be identified very easily.

  I recommend this HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  You have the Vendor ID and the device ID and the use of these two IDS in pci database would help you to find the right driver.

  By the way: If your Wlan and cam n t work, install the drivers matrix, you've already tried this?

• Satellite C50D-B1107 - unknown device in Device Manager

  Dear toshiba
  I have unknown device in device for satellite C50D-B1107 Manager, part number PSCN5V-00700HAR
  Although I download toshiba Web site necessary divers, then I followed the steps outlined in the knowledge base technical (how to identify an unknown device)
  the pilot has ven_1022 and dev_7814, looking for the necessary driver I found noting and I wounder why this driver not includred in the package of motherboard drivers
  so I nee your support to get this driver
  in the meantime your comments soon
  Kareem Ma

  Note the operating system: win 7 32 bit

• Satellite C660 - tos6205 unknown device in Device Manager

  Hello
  I am not able to find the drivers. In the Device Manager when I check the details of the "unknown device" it says "TOS6205/ACPI compliant."

  I tried to look for the 'Bluetooth stack"Driver for my model in the pg Driver download. But I seem not to be fined.

  Details of my laptop: -.
  Model: C660-A275
  Short model: PSC1NV (received this box no.)
  OS: Windows 7 Ultimate version 6.1.7600 (build 7600) (I guess it's 32-bit). (the laptop is x 86)

  Please suggest solutions as soon as possible.

  Kind regards
  Sujit

  page drivers Goto
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Enter everything except PSC1NV

  take & set up
  Filter of Bluetooth driver package
  then
  Bluetooth stack

  That's all

• Satellite Pro A100 - unknown device TOS1900

  I have a toshiba satellite pro a100. It came with XP installed.

  I recently installed a bigger hard drive and updated to Vista Ultimate (32 bit) operating system. I downloaded and installed all the drivers on the toshiba site but I still have a 'unknown' device in the device with a yellow exclamation point Manager, it details tab it says:
  'ACPI\TOS1900 '.
  * TOS1900»

  Can someone please tell me what this device is, and where can I find the right drivers?

  Hello

  Have you installed the Toshiba value added Package?

  Isn't it? To do this, and this unknown device should disappear

  Welcome them

• Satellite U500-115 - unknown devices after the Installation of Win XP

  Hello

  I just installed Windows XP on a Satellite U500 - 115 (PSU5EE) and cannot get rid of several unknown devices in Device Manager.

  Before to install the operating system, I changed settings AHCI in the BIOS to Compatibility-Mode (IDE), so I don't need to inject the SATA driver during installation.

  These are the unknown devices:

  ACPI\PNP0C32\1 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\2 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\3 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\4 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\TOS6205\2 & DABA3FF & 0 (location: System compatible ACPI Microsoft)

  Of course, I installed driver chipset and graphics driver from the toshiba download page, but the unknown devices are still there! Can you please tell me what kind of driver I need to install ACPI devices - and get rid of these unknown devices?

  Thanks in advance,
  Hans

  Hello

  In my opinion the unknown devices belongs to the SATA interface controller and these appear as unknown device because you have installed the XP compatible mode.

  Try to install the Intel Storage Manager driver.

  ACPI\TOS6205 device can be a Bluetooth device.
  You must install the battery Bluetooth to get rid of unknown device.

  welcome them

• Satellite A500-138 'unknown device' in Windows 7

  Hi all

  I am the owner of a Satellite A500-138 - Part Number: PSAM3E - 013014H 2.
  I just finished the upgrade of the o/s from the horrible vista to Windows 7 Ultimate 64. Update was smooth. Drivers and utilities were easily on your website and install it correctly. Almost everything seems to beworking OK...
  I find myself with 2 numbers:

  1. the watch still an "unknown device" Device Manager
  Details of the device shows hardware IDs of ACPI/ENE0200 and * ENE0200
  What is this and where can I find the driver?

  2. I can't find the Manager of LAN/WLAN cool utility that came with vista.

  Thanks in advance,

  Friend

  Hi friend,

  Have you checked the device ID and the unknown device provider? You can check in the properties of the device.
  Maybe it s Bluetooth adapter if your laptop is equipped with such a

  Regarding the WLAN tool, I think you mean ConfigFree. You can download it on the Toshiba site. Maybe the version of Vista also works on Windows 7.

  Good luck! :)

• Satellite A505-S6004 - unknown device on Windows Server 2008 R2 64 bit

  I'm trying to install Windows Server 2008 R2 64-bit on an A505-S6004 (initially Windows 7 Home Premium) to a new disk. After downloading and installing many drivers for Windows 7 and install Toshiba Web site, I have two things left in the device manager that I don't know what to do for them.
  The info is under another devices basic device PCI System Bus 3, device 0, Function1 and..., function2.

  Any ideas what this can be?

  Thank you for your comments!

  If you are looking for drivers or unknown devices anytime, once again, that could be useful:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=208721&]

• Satellite L300 - no boot device

  (I am a German<~>

  Hello
  my laptop does not start after it crashes. I was typing my reports for the school. It says "no boot device" and I don't have a backup or a recovery disc.
  (I forgot to create). What can I do now? I need my Vista 32 bit Home Premium back. But how?
  And I don't have registries it.

  I have a Toshiba Satellite L300 Model.

  Hello

  The HARD drive is recognized in the BIOS? If so, you can start in safe mode?

  To be honest, it looks like this drive is defective and so the laptop couldn t start more of the HARD drive. Maybe you need a new and if your laptop is under warranty, you should get a new one free of charge from the ASP.

  Welcome them

• Satellite A100-926: unknown device bus pci7; device: 6; function: 3

  Hello world

  I have an A100-926, device management, it shows me that there is an unknown pci device on the bus 7. function 3, but there is no way to know what is it and how can I install it because if I Reinstall driver it don't think the right on the toshiba tool cd.

  I don't know if it is related to that but in an application, the button Delete must pushed me for longer than a second to work :-(
  Is there anyone who can help me?

  Thank you

  You reinstall the operating system on your laptop?

  Generally, the laptop is delivered to the image of Toshiba and there should be some unknown devices in Device Manager

  In the forum guys have put the link to the very useful document from Toshiba.
  It describes how to identify the unknown devices.
  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Maybe this will help you to know which unit it is.
  Then, you can download the right driver from the Toshiba page