Satellite L300 - speakers speakers 2/1 settings

Similar Questions

• Can satellite L300 - headphones and speakers simultaneously?

  I have a Satellite L300 with Self installed Windows XP (Realtek Sound Driver from Toshiba Web site 5.10.0.5559).
  Connect the headset turns off speakers. I want that speakers and headphones operating simultaneously. What can I do? Thank you very much for the help.

  Cordially H. Reinhold

  Nothing. Something like this is not possible. I'm sorry.

• How to restore the Satellite L300 PSLB8E to factory settings?

  I have problems with repeated "crash" of my system.
  I get the dreaded blue page, which then restarts (usually) pretty quickly.

  I think trying the option 'Restore factory settings', but I've never done this before.
  If I do, which will leave it on my computer?

  I have my own disks which I was invited to do the last few months (I just got this machine since May this year) will be I need it, or is there something else that is needed?

  I have a Satellite L300, PSLB8E, using Vista Home Basic

  Hello

  Hmm. I m wondering if you checked a few discussions here on the same theme.
  Did you?
  There are more that enough son and I m sure you will not need to create this thread after reading some reviews.

  Just a tip; the use of HARD drive recovery option will format the system partition, but the D partition (where the HARD drive recovery files are placed) wouldn't be formatted!

  If you are still not sure after reading some discussions, please ask again ;)

• Cannot restore my Satellite L300 to factory settings

  Hi all

  I have a laptop Satellite L300 who played upward. I was advised to do a system restore to factory settings.
  I turned on the computer and press F8 to bring up the Advanced Start and you press on enter repair my computer and screen rises windows load files.

  He has been slain on this screen for about an hour now and did not move to the next step.
  Could someone give me some advice please?

  I agree with Timox. There is not much you can do about it.
  There is no mechanism to have direct influence on the HARD drive installation procedure.

  Try again. You may be lucky and recovery installation will start correctly.

• No audio device installed Satellite L300-28R (PSLB8E-12T018GR)

  Hello

  My English isn't the best, unfortunately. Maybe someone can help me.

  The following problem:

  A Satellite L300 ran without problems until now with windows 7 (32 bit). I had then increased PC speakers of this came of trust with a USB flash drive that will serve as an audio interface for mailboxes. He has been infected by the first recognized by Win7, installed, and I could use Ihne. But then the sound card integrated (Realtek HD Audio) is disabled. Now, when I remove the USB audio interface I have no more sound. There is a lack of complete the "Realtek HD Audio" entry in the audio control.

  In the Device Manager is not an entry ' Audio, video and game controllers' also appear longer. The interesting thing about the HD audio driver, but he is always installed correctly. It is found but no entry for more video, audio, game controllers, and if I was in the toolbar the look of speakers just click on it a red cross when he get up "no audio output device installed."

  On this, I tried to uninstall the system USB audio drivers (no problem) has restarted. Not always the same sound problem.

  That's why I completely uninstalled all drivers audio and tried Windows 7 default drivers. The same problem. I uninstalled the audio drivers, this time I tried the drivers Toshiba, same problem.

  Fact is I can remove all the drivers, reinstall, which happens without problem and the error message, then it is same because "drivers have been installed, the machine can be used now" I click on what there is also my drine Realtek HD Audio. But then I opened the Soundsteurung he wrote me, "No audio device installed" it's almost as if the onboard sound has been disabled in the BIOS, but unfortunately there is no entry exists, since the BIOS is usually something to bend parameters.

  I have integrated sound card in my vemutung the BIOS from a USB audio interface is disabled, I would now like to 'hidden' bios unlock options and manually activate the sound again. Unfortunately, I do not know how do I unlock the BIOS.

  Is there anything else maybe ideas, suggestions or solutions? Have already the system is set up with new same problem, the drivers are installed, the device is detected and marked as ready, but not input in the audio control and no entry in the Manager of devices for "audio, video and game controllers".

  Once had a similar problem with my desktop where I could pass without any problem, but the onboard sound in the BIOS again, unfortunately, what with the Toshiba BIOS Lite is not the case.

  Hope someone can help me here, slowly I won't now, so that a new installation was not, I see the problem with the BIOS setting.

  Answers in German would be nice

  Greetings and thanks
  yunyx

  Hi mate

  To be honest I'm not quite sure what the problem might be m.
  Your ad is also a bit confusing.

  First of all, the BIOS is not similar to the BIOS that you can find on desktop PC and as far as I know there is no special option to enable or disable the sound card.

  So I think that in your case, it s BIOS not deliver.
  I think that its Windows operating system that makes some disorders who knows maybe the registry is confused up similar facts is that you should see some yellow exclamation points in device if Manager driver would be absent or you should see an unknown device in the devices list

  The latest Realtek audio driver could be downloaded directly from the Realtek page, but even if the Realtek audio driver is not installed Win7 standard driver should recognize the sound chip and sound must be detected during the operating system installation.

  I think you should try to install a driver from Realtek but if this won't help you, then you should try a new installation of the OS. Get it back you would help define the laptop back to factory settings and I think it's the fastest solution in your case

• Satellite L300: How to record the sound from a video without sound

  OK, yes the title of the topic is not entirely clear. Here's my situation: I just bought a Toshiba Satellite L300 with Vista; Realtek HD Audio Manager is installed. I would like to record the sound of a video file using Goldwave (a sound editing program); but I don't want to have to listen to the sound, while it's recording.

  On Windows XP, you used to be able to record the sound of the stereo mix, but put the speakers on mute and it would record again. Now I find that I have to turn my speakers in order to record anything on my computer. (Yes, I fiddled with all mute buttons, insured that all reading and recording devices are working and front volumes. My current solution is to plug my headphones on my laptop and to reactivate the sound from the speakers to register... and not put the headphones in my ears)

  I have now spent in the last 4 hours looking for a solution, and I must say it's especially ridiculous. I used Vista before and I've heard rumors of how many people hate, but honestly, how is it that now the audio capabilities seem to be reduced?

  Does anyone have a solution of how to record sound with the speakers on mute?

  Hello

  I also recorded the audio of a video file using another software called 32. and Win XP
  I also used the stereo mix, but to be honest I have never muted the speakers while recording.
  To be honest I n don't know if it's possible, but if you want to test, you can try the Realtek HD audio Manager in the access panel and set the speakers to cut on the first tab called speaker.
  But as I said, I've never tested and that's why I m not very good if it will work.

• Satellite L300 - I can not install an update for Windows Vista

  I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

  When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.

  This diagnosis is generally applied to all Windows Update related issues.

  Stop Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  4 Please, do not close the command prompt window.

  * Rename Windows Update records *.
  1. at the command prompt, type the following commands and press ENTER after each command:
  2 ren %systemroot%\System32\Catroot2 Catroot2.old
  3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4 Please, do not close the command prompt window.

  Registration of DLL's on Windows Update *.
  1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
  2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

  Restarting Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net start wuauserv
  net start bits
  net start cryptsvc
  output
  4 now, please check the updates via Windows Update to determine if the problem has been resolved.

• Satellite L300 - PXE - E61 media test failure

  Today, while browsing the Internet, my laptop decided to randomly cut to a screen with this error message:

  Intel UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8101E/8102E PCI - E Ethernet Controller v1.07 (080320)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  Intel UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For realtek RTL8101E/802E PCI - E Ethernet Controller v1.07 (080320)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM.
  No boot device - insert boot disk and press any key

  I have absolutely no idea what it means, and I use never no ethernet cable because I have a Wi - Fi connection, but he is relentless. I went through F2 and F12 and all settings are perfectly fine. Order of the BIOS is fine with the HARD disc on top.

  What should I do?
  Best regards

  Hey Buddy,

  If you have tested the HARD drive in a box of another and external HARD drive laptop without success the case is clear: the HARD drive needs to be replaced because it s defective!

  I can understand that you want to recover your data, but what do you do if you are not able to access? In this case you need assistance, a special data recovery lab, but it is not cheap and costs hundreds of dollars.

  I m wondering that you don't have a backup. Have you never tried to do it or thought it would be useful?

  Last but not least a new HARD drive can be ordered at a service provider authorized in your country or each computer store. Satellite L300 supports SATA 2.5 hard drives.

• Satellite L300 - product key Windows 7 required

  Hello. I bought my Toshiba Satellite L300 in 2011 and it came with windows vista preinstalled. Some time later, we learned that Toshiba gave a free upgrade to windows 7. I got the install disks and install windows7. I had zero problems with my machine since and have been a very happy customer - until very recently.

  I emptied my trash recently and for some reason, there were a few critics files in there, so now, my machine does not start. I don't know how they got there because they were in the trash administrator and I always use a subordinate user account - for security reasons.

  Long story short, I tried to start my computer using the windows 7 installation disc which worked perfectly until I had to enter the product key. Unfortunately, the product key on the label of my laptop is for windows vista so I thought that it is not valid. I wonder if I can recover my product key of windows 7 from anywhere? Toshiba would have a record of what they could send me? I was informed by microsoft that I get from Toshiba.

  To complicate things, I bought the laptop in Ireland, but now lives in South Korea, so I can't at home get the product key.

  I have the Toshiba DVD upgrade, the product key would be there?

  Please, any help would be greatly appreciated!

  Toshiba does not provide a unique product for the Windows system keys.
  Toshiba offers own recovery disks / averages in order to recover the laptop back to factory settings.

  Windows system which is part of the image of Toshiba is already enabled and does not require the additional serial key.

• Need help with the recovery of the System Satellite L300-149

  Hello

  We have a Satellite L300-149.
  Was running really slowly then wanted to reset it to factory settings.

  Doesn't the "press F12 during startup, insert the disk in" etc etc BUT have a horrible feeling that I put a disc to which belonged in fact to a different Toshiba, we used to use a U300.
  'Give' was that the manual for the U300 is now on the desktop on the Satellite :-/

  I hope that this would not be a major problem BUT the F8 key is gone now it's impossible to connect to the internet.

  I looked online and read that the L300 sometimes doesn't come with a disc that the info is kept on a separate part of the disk hard hope so I could reset it back to settings to factory again but when I click on F2 on start up and go to the option to restore it, noting happens.

  Can someone please help?

  Hello

  Forget HARD drive recovery now
  You have recovered the system using another disc and it has been removed and the HARD recovery disk image files. If this option is NOT possible!

  You reason that the L300 and all other laptop does not come with recovery discs.
  The recovery disk must be created using the recovery disk Creator called preinstalled software. But it is also NOT possible because you deleted the preinstalled system and the files that are needed for this recovery disk are no longer available!

  But if everything is working properly except the WLan FN + F8 key, then I recommend you only install the Wlan driver. I think that the key does not work because the right WLan driver is not installed.

  I think that the Satellite L300-149 supports the smart WiFi Realtek RTL8187B.
  Then install the right driver Wlan you can find here:
  http://APS.toshiba-tro.de/WLAN/?page=downloads

• Satellite L300-15V - how to restore BIOS & DMI?

  Hello!

  Please help restore the default settings of the BIOS and its content very.
  DMI is necessary to restore the data, and the value of SN, UUID and others, this utility is not found.
  Laptop: Toshiba Satellite L300-15V
  Model: PSLBCE-00L008RU

  Does not work:
  -The touchpad during installation of Windows XP (after installation and install the drivers everything works), used to work;
  -Adjust the volume using the wheel;
  -Some Fn keys.

  It would be ideal if someone sent the utility and / or a full dump of the BIOS (probably taken by the programmer).
  Thank you!
  Change the load through the service center to offer please don't be too cheap and unreasonable.

  Post edited by: ADMIN
  English language only.

  Hello

  I put t whether someone here will be able to help you with this, but who can help you with this if you n t even write what model of laptop you have.

  I guess you know that the BIOS is mobile specific and if you want to help volume you must put the exact model name and model number.

• How to enable virtualization on Satellite L300-1DN?

  Hello
  I would like to know how to enable virtualization on Satellite L300 1DN please?
  Thanks in advance

  Hello

  General virtualization is not available on all computers laptops because it s based on the material and it must be supported on the CPU.
  On many models with processor supports virtualization, this option is added in the BIOS. Sorry, but if this option is not available in the BIOS settings nothing you can do about it.

• Satellite L300 - ODD has exclamation mark in Device Manager

  Please could someone help me with my Satellite L300 laptop?
  It has a pre-installed Pioneer DVD - RW drive, but in Device Manager it has exclamation mark and not show as a CD player and DVD player.

  I tried for days to find the right drivers but no success, it displays as: PIONEER DVD - RW DVRKD08A ATA Device in Device Manager, I am unable to watch DVD s, thank you.

  Remove the device from the list and restart your laptop.
  The problem again?

  What operating system do you use?
  You use your laptop to factory settings?

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Satellite L300 - clean install Win 7 SP1 64 bit

  I just did a clean install of Windows 7 64-bit, replacing the normal 32-bit Vista that comes with the laptop.

  The facility has been good, but I have a few questions about the following:

  I adjusted the automatic run settings to ask every time for all selections. The problem is that when the game DVD in WMP or VLC disk reads but is noisy. It is very good for the s CD without excessive noise. The acoustic silencer on the download site is for 32-bit, but can be used in this laptop. In the original Vista there is no noise at all, so I wonder if there is other parameters that can sort this point, otherwise I'll have to keep changing things manually with the acoustic silencer.

  I noticed a very low noise coming from laptop (like a lighter version of a business when you're boarding Jet it). I ran a video memory Stress Test CE and he showed a few errors. If I reduce the brightness of the screen there is less noise so I wonder if it's something to do with the Panel of inverter of screen I'm sure that's not the HARD drive or the cooling fan, but it could be something on the motherboard.

  On the backup plan Acronis will slow down my system or are Win 7 OK backup options?

  Thanks a lot for all the possible solutions to these problems.

  A long time ago I've installed Win7 32 bit on friends Satellite L300. It worked perfectly. Much better than original Vista.
  > I still don't know what is the best test for the screen.
  I put t understand what kind of test do you mean. I hope that you have installed the right display driver and LCD works perfectly with a native resolution.

  Win7 recovery with Acronis image creation is, generally, the right decision. With this disc, you can install Win7 again and again very rapidly and you should not install every single driver separately.

  If you want to keep this laptop any longer I think it is worth to buy it. One last thing: you will buy it once and you can use it in the future too if you decide to buy the new laptop or PC.