Satellite L300D-11 a - do not start Windows vista

Similar Questions

• Satellite L300D - 21 p - failed Installation of Windows Vista 32 bit

  Hello!

  I recently bought a Toshiba Satellite L300D - 21 p, and now I wanted to install Windows Vista Business 32-bit.
  But still, the installation stops at where the screen says "how to complete the installation..." ".

  Do you have any idea what I need to do to fix this?

  Thank you very much for your answers!

  Greetz

  Stefan

  If you use the Toshiba recovery disc then you have no need to reinstall the SATA drivers.
  If you use Microsoft disc, you need the SATA drivers.

  But if the error message indicates that the installation is complete, then the HARD drive is recognized correctly and you should not have the SATA drivers in such a case.

  > Where can I get the SATA drivers?
  It seems that your laptop computer supports the processor AMD and ATI chipset.
  Driver graphics card contains the driver for chipset and SATA drivers needed.
  The different folder for the graphics driver and the drivers are placed in the folder:
  Packages\Drivers\SBDrv\Filter\NB

• Re: Satellite L300D-13s - WiFi does not work with Vista

  I have a L300D-13s that came with Visa Home Premium on it.

  His work very well outside the wireless that refuses to work.
  I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

  The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

  If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
  Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

  Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
  If the problem obviously lies with Vista and/or the drivers.

  If someone has solved this.

  And no - don't tell me to go out and buy a router "Vista compatible".
  If Vista does not work with router XP and other operating systems compatible with Vista is wrong.

  Hello

  > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
  I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
  In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

  I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

  Maybe you should try that too.

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• My office is behaving strangely, slow, sometimes does not start Windows.

  * Original title: strange

  OK, so I have a desktop with Windows 7 installed above as my users families. My family tends to put viruses or other forms of malware on the desktop as they constantly plugging their friends drive etc. Last week my office just behaved strangely, running slow, sometimes not start Windows and even run checkdisk on each reboot. I have however to discover the reason for all these questions, because it turns out having a Trojan horse installed on the desktop computer that allows a hacker to access my PC remotely. AVG detects whenever I had scanned my office but unfortunately the Trojan horse is just renamed and removed to another place when detected. Last week I did a new install of Windows 7 and everything worked fine until yesterday. I noticed that AVG was not updated yesterday. I first tried to install what AVG but was unable even to reinstall AVG.  I didn't realize that once I have turn off the Windows Firewall I can install and update AVG without a problem. However the firewall Windows has not prevented never AVG update or install in the past. I thought it was a form of malware, the origin of this problem, but after the start of the HBCD and scan with malwarebytes and also to scan using Kaspersky rescue disk. I have not found a malicious software. Even my windows laptop 8 I have no problems updating and installing AVG, while Windows Firewall is enabled. I really believe that it's some form of malware with managed to bypass all virus scans. Please give me some advice and let me know what is the problem and the solution. Thanks in advance

  It has been long since I had no faith on average. :-)

  Use the removal of AVG on this link tool to completely remove AVG, following the installation of Microsoft Security Essentials here ...

  In addition, pull it out of Windows 8 and leave Windows Defender to take over. You will have less problems you get with AVG. There is no need to install MSE in Windows 8, as it's already there...

• I tried to install a new of Lightroom 6 copy and after enter the S/Ns, I get an indicator which is does not support Windows Vista. My operating system is Windows 7. I tried to re - start my computer and try to reload and get the same error.

  I tried to install a new copy of Lightroom 6 and he says I have Vista OS but my OS is Windows 7. I tried to restart the computer and reload the software but get the same error. Any suggestions?

  See the link below:

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

• I can't start windows Vista, I get this message: Loadkey failed with error 1016

  Hello. I can't start windows Vista in all configurations. I get this message: Loadkey failed with error 1016 (sthive = 0).
  I get the same message when I try normal or safe modes. The mouse and keyboard do not work. I have
  don't know what to do next. Any suggestion would be appreciated. Victor

  Hello and thanks for your reply. The problem has been fixed. I'm not exactly sure how, but that's what happened. When I'm at a screen that says "repair windows" the cursor would not move to click on proceed. When I had almost gave up and was will wipe the hard drivbe and do a clean installation of "Windows 7", I turned on the computer and got to repair screen and the cursor was somehow operable. I clicked on continue and the computer fixed itself and has been running as good as new since. The computer is 'HP' office and running "Vista".
  Thank you and this problem is solved. Victor1244

• Cannot start windows vista: bugcheck 9f

  Title: bugcheck 9f, parameters = 0x3, 0xaf5fc030, 0xaf5fc030, 0x84e6c648

  my laptop crashed and closed, and I don't know what to do. can someone help me please.
  yesterday when I turned off my laptop it's ok.but today when I pressed the power button, it started normally
  He showed only two options:
  'launch start up repair (recommended)' or 'start windows normally '. Startup Repair cannot fix the problem and start windows normally does not work, it remains just on page load for hours.
  the problem is bugcheck 9f, parameters = 0x3, 0xaf5fc030, 0xaf5fc030, 0x84e6c648
  I really need my computer soon, and I do not have the windows cd .i don't really know what to do someone help me please

  Hi Ak_609,

  1. Did you the latest changes on the computer?
  2. When you receive the error message from error checking?

  First unplug all external devices (except keyboard and mouse) and then try to boot to the desktop and let us know the status.

  Method 1

  Check if the computer starts in safe mode and after back with the results.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Method 2

  If the computer starts in safe mode then I would suggest you to perform control and clean boot if it helps.

  It is possible that some third-party programs installed on the computer is at the origin of the problem in normal mode.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Error when starting Windows Vista

  "This application has failed to start because BHO.". DLL was not found. Reinstalling the application may fix this problem.

  and

  "IE3SH Application has stopped working properly. Windows will close the program and notify you if a solution is available. »

  and

  When you open a tab in Windows Explorer I get a "Script error, do you want to keep running the script, yes or no?"

  Hi Buster12345,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you get script errors in Explorer Windows or internet explore?

  It is possible that some third-party programs installed on the computer causes the error at startup.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  See the Microsoft article below as well as try the steps mentioned if you are referring to internet explore.

  How to resolve script errors in Internet Explorer on Windows computers

  http://support.Microsoft.com/kb/308260

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Will not activate Windows Vista on a HP computer.

  The motherboard on my computer went bad and wouldn't even start Windows Vista.  I replaced the motherboard and reinstalled Vista, but when I type the product key for Windows Vista Home Premium OEMAct HP sticker: [redacted key product], I get the message: "the product key you have entered does not seem to be a valid Windows Vista product key.»  Please check your product key, and then type it again.  I'm not able to activate Windows.  Please help me.

  Hello

  Since you have changed your motherboard the system configuration will be different, and this is the reason why you're not able to activate your copy of Windows Vista. I suggest do phone activation and check if you are able to activate your copy of Windows Vista. Click on the link below.

  Check the links below for more information.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activating Windows: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver satellite A210 - 16G Mass Storage Controller for Windows Vista 32-bit

  Hello, I need driver Toshiba Satellite A210 - 16G Mass Storage Controller for Windows Vista 32-bit. If you have the installation file, please redirect me if you have any other file, please explain to me where to install it.

  If I were you I would take a look at the site to download the drivers from the main Toshiba page, because you will find everything you need.
  The mass storage controller can be the HARD drive controller or the controller of the SD card. I want to download both of them.

  Here´s a direct page link drivers: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Welcome them

• Cannot start windows Vista in safe mode.

  I followed these instructions to start Windows 7 in safe mode:

  I tried to start windows vista in safe mode by using the following:

  1. Click on the Windows icon in the left bottom of the screen while Windows is running in normal mode.
  2. Click on the arrow located to the right of the lock at the bottom of the popup menu symbol
  3. Choose "restart".
  4. I restart the computer, press the F8 key and hold.  I tried at the beginning of the sequence to reboot and after that the light appears on the mouse, but still before the windows logo appears.
  5. Restart the computer in normal mode.
  6. I tried the key down and also tried pressing the F8 key several times both giving the same results without success.
  7. To eliminate the possibility of a bad keyboard, I switched from keyboards with the same results.

  Can you tell me what I am doing wrong?

  You tap f8.

  You can have a F-Lock key in the upper right corner of your keyboard.

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Read the other way at the link above.

  Table of contents > Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• CC of Dreamweaver not supporting Windows Vista but Photoshop CC's?

  Adobe Dreamweaver CC does not support Windows Vista, where, as Adobe Photoshop CC's? I mean, should not support the same thing? Is it because of the build type or something? But what really bothers me. Please let me know if there is a different version of Adobe Deamweaver that I can download, which supports Windows Vista too. Thank you.

  -Murtaza

  Hey Murtaza,

  Applications of CC are tested on Windows 7 and later. Please take a look at the links below for the CC, CC DW and PS CC tech specs.

  http://www.Adobe.com/in/products/creativecloud/tech-specs.html

  http://www.Adobe.com/in/products/Photoshop/tech-specs.html

  http://www.Adobe.com/in/products/Dreamweaver/tech-specs.html

  Thank you

  VIANEY Gupta

• Satellite C660-1CN - touchpad do not start with Windows

  Hello
  I have problem with Toshiba Satellite C660 - 1CN PSC0QE.

  Touchpad do not start with Windows 7 Home Premium.
  All the drivers are up to date.
  BIOS - lastest.

  After logon, I need to click on * double * "FN + F9" and after it is OK until the next reboot.

  I tried:
  several drivers of Synaptics - no change.
  Reinstall Windows - no change.
  Mini Windows XP Hiren - no work.
  Default BIOS - no change

  After that I installed 'toshiba value added package' I can't turn on the touch pad at all.

  To be honest, I never heard the show. According to specification for laptop, your laptop came with Win7 home premium 64-bit. With factory settings touchpad should be activated after the OS has started.
  I can read you have reinstalled Windows. Have you reinstalled with the original recovery image and tested with factory settings?

• Satellite A100-232 does not start windows, but is stuck

  Hello

  I am having a serious problem with my old laptop (Toshiba Satellite A100).
  When I turn on the pc, it does not start the Windows but is stuck.
  If I press F2 to open the Bios, it seems not work while the works of F12 (select boot device), but it is impossible to start anything.

  I tried the following:

  1 removed, cleaned and replaced the RAM
  2. HARD drive removed and reconnected.
  3. check the HARD drive if it is damaged, but it is not.
  4A tried to boot from the Windows XP cd and install it but it crashes
  5A tried to boot from the cd with Linux, but it does not work.
  6. has created a Windows 98 flash drive to start, but it does not work.
  7 tried to clear CMOS by removing the battery, but I couldn't because he is stuck on MB.

  I visited a technisian but he couldn't fix it.
  He told me that the BIOS is corrupted or crashed. Maybe I should replace somehow.

  Is this possible?
  How?

  Thank you

  It is for the Satellite A105 (PSAA2U) Bios Update, you can test the file at your own risk.

  A text readme file is located in the folder, follow the instructions.
  Download the Bios file from the link and copy it to a USB key, go into you Bios and this flash file.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=2188938&PF=true