Satellite L300D-13s - why WLan appear and disappear

Similar Questions

• Satellite L300D - 13s - error during the creation of the recovery disc

  Tried twice to create discs with creator on my new Satellite L300D - 13s.
  Twice failed them to halfway through disc 1 with the message unable to read the file F:\07031XSP.swm, error 020150-20-00000000.

  How do I now please?
  Come see an old NET with a similar error and disc quality was mentioned.

  Samsung pleomax 4xdvd-rw uses. Should I try something else then?

  Yes, it certainly comes with DVD disc is not compatible.
  You should try different children of the DVD from different manufacturers.

  I had good experience with TDK DVD-R

  Good bye

• Windows 7 on a computer hp laptop, start menu never ceases to appear and disappear if often I can't type on the command line.

  Windows 7 on a computer hp laptop, start menu never ceases to appear and disappear if often I can't type on the command line. I can open Google Chrome and click here to read the games. If I need to type anything it either in the menu popping up any program does not allow me to do. I have it in safe mode to try to run a full scan check but not able to do. Any suggestions?

  Help, please

  You have another keyboard, say a connected USB, try? If this occurs only when you try to type, I was wondering if the keyboard is faulty and its operation to sort of the windows key?

  If this is likely, you can try https://support.microsoft.com/en-us/kb/216893 if you click on the toggle bits.

  If not that, perhaps of possible malware? Can you go as far as to update your antivirus software and then run a full scan to see if it finds problems? When you say "able to do" whats happening?

• liveupd.exe' kept appearing and disappearing in my taskbar and in my task manager as well

  I realized my games kept minimizing after almost every minute and after careful observation, I realized in my both task manager and "liveupd.exe' kept appearing and disappearing in my bar tasks. How can I stop this? Please help me

  Original title: liveupd.exe

  Hello
   
  I suggest that you put the computer in a clean boot state and check if you receive this message.
  
   
  Method 1: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  
  Run an antivirus with Microsoft Safety scanner scan and make sure your computer is virus-free.
   
  Method 2: Microsoft Security Scanner free is a downloadable security tool that allows analysis at the application and helps remove viruses, spyware and other malicious software. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  You can also download & run Microsoft Security Essentials on your computer.
  See the link: http://windows.microsoft.com/en-US/windows/products/security-essentials
   
  Let us know the status of the issue.

• MSO appearing and disappearing query

  Can someone help me out here. I've been trying my brain on this subject, but do not have the answer yet!

  What I have is a card and I want to highlight the different points of interest on the map. To the location of each point of interest, I placed a button so that when the user clicks the button, a MSO appears (in this case, a text box where the State 1 is a transparent box and State 2 is a text box). What I want to do is: when the user then clicks another button, another MSO appears and disappears from the ASM first.

  I've had a play around with the buttons and led to some sort of solution, where I used the "go to the next State" for ASM I want to appear and 'Go to the State (State 1)' for WHO, I want to disappear. Now it seems to work on the Viewer from the office, but not on my iPad 2. Can someone help me? FYI, I use CS6 with Viewer Version 24.

  Thank you very much

  The answer is not many MSS, it is a very big MSO.

  Much easier to manage once you have but more complicated to create.

  Bob

• Satellite L300D-13s - black screen and nothing appears

  Hi, I have Toshiba Satellite L300D-13 s (pslc8e-02p013en).

  I turned off my laptop as usual and when trying to turn it back on yesterday, I have NO screen. I can here it whirring and all my lights are on, my battery is showing green (paying), but all I have is a black screen, no markers, imprecateurs, whatever it is?
  Have I somehow turned off the screen?

  I was in battery saving mode if it has nothing to do with it at all?

  PLEASE HELP - I DON'T KNOW WHAT TO TRY

  Thank you

  Hey,.

  Normally the battery saving mode (stand-by) has nothing to it. On my Satellite L300, it works correctly and I often use this mode.

  In any case, it would be interesting to know if you can see an image on an external monitor. The internal monitor FL inverter is may be defective and so it does not show an image... Who knows? ?:|

• Satellite L300D-12I - No. WLAN and function after reinstalling webcam

  I have the following:

  Toshiba Satellite L300D-12I (model no - PSLC8E-01513EN)
  AMD Athlon X 2-QL-60
  ATI Radeon 3100 graphics card
  Windows Vista Edition Home Premium
  No ser. 68364516Q

  After major problems, I had to restore to the factory settings of the F key at startup. I now can't get the built in wireless and Web Cam system to work!

  Please tell us, in a few simple steps. How to restore these two functions.

  Thank you
  John Gaff

  Hello

  I'm a little confused about your ad m... You wrote that you restore your laptop to factory settings, but now you can t get WLAN and webcam to work?
  Normally, if you restore settings factory using the Toshiba or HDDrecovery recovery disc, all the drivers and tools are installed and everything will work.

  You have yellow exclamation marks in Device Manager?

• Satellite L300D-13s Realtek 8187 b - downgraded to vista, no network not found!

  Okay, the laptop L300D-13s, the wireless network adapter is identified right, like USB 2.0.

  Vista was on the laptop, but I immediately wiped and put XP, as Toshiba really should have in the first place. The Toshiba driver can be downloaded from the Web from Toshiba site. This installs.

  Once everything is configured, using XP zero wireless integrated uility, a bubble appears in the system tray indicating "one or more wireless networks are available..." "etc.

  However when you open the XP WLAN utility, some networks are never found. Power management has been tried in various forms and the switch is on the FN + F8 does not affect the ability to basically never find a wireless network. There is a problem somewhere.

  The drivers from www.realtek.com.tw do not operate on this card in this Toshiba laptop - it is said that the hardware is not compatible. However, as mentioned, install the drivers from the Toshiba site, but can't find any wireless networks.

  I've used NetStumbler - that use a basic default NDIS driver loading the application and find networks. It is just a "sniffer" for the WLAN, cannot use this to connect.

  It can't be just me certainly facing this problem? I have tried most things related to uninstall/reinstall the drivers from Toshiba Web site, that specifically say they are compatible with XP. Any help is appreciated. I'm much educated WLAN and have tried everything I can think of-although admittedly I have not disassembled the laptop computer and deleted/replaced the card again.

  Hello

  Just a question;
  Did you create the disc of recovery before you erased the HARD drive?

  I ask because you need to update the BIOS first before installing Windows XP.
  Usually, the BIOS should be updated to running the OS preinstalled Toshiba but maybe you're a lucky guy and the update of the BIOS will work running Win XP.

  However, as I said, updating the BIOS, then download driver Realtek WLan (REALTEK RTL8187B 802.11(B/G)) Realtek page and install again.

  Then check if the wireless network card can be recognized and if you can establish the WiFi connection

• Re: Satellite L300D-13s - WiFi does not work with Vista

  I have a L300D-13s that came with Visa Home Premium on it.

  His work very well outside the wireless that refuses to work.
  I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

  The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

  If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
  Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

  Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
  If the problem obviously lies with Vista and/or the drivers.

  If someone has solved this.

  And no - don't tell me to go out and buy a router "Vista compatible".
  If Vista does not work with router XP and other operating systems compatible with Vista is wrong.

  Hello

  > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
  I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
  In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

  I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

  Maybe you should try that too.

• Satellite L300D-13s will slow down the boot process

  Whenever I start the Satellite L300D-13 s computer laptop (using Vista Home Premium with factory settings) I am presented with a Please wait"" message. The startup process can take up to a minute! Is it because of McAfee installing and executing a Bios check, because this does not happen on my desktop PC (Vista Home Premium) except if an update has been installed?

  Apologies for the fundamental question, but this is getting frustrating that this happens every time you start and I don't know why. Please help if you can?

  Thanks in advance...

  Hello

  There are different reasons why your Vista runs slowly.
  The main reason is the enormous amount of processes that are ruining to the background of the OS.

  You should know that the laptop uses different features that are controlled by drivers and tools.

  If you want you could disable some processes using the MSCONFIG. Check the Startup tab.

  Verify that the processes are not really important to you and turn it off.

  Welcome them

• Satellite L300D-13s - disk drive will eject when booting on battery

  When to start my Satellite L300D-13 s on power electric battery drive ejects when starting upwards and then he won t keep any kind of CD, DVD or CD-rom discs however it works fine when starting on the grid.

  The battery is fully charged and there is no other reason why it shouldn't t work.
  Can anyone help?

  Windows Vista 32-bit.

  Hello

  > When starting my Satellite L300D-13 on power electric battery of the disk drive ejects when starting upwards and then he won t keep any kind of disc
  It's really strange, sometimes it is hard to believe that this would be possible

  I m not quote that if the reader of CD/DVD may be affected and cause this problem but nothing is impossible and that's why I think you should talk to the ASP in your country and have to explain the whole story I think guys won't believe something may be possible, but in my opinion the CD/DVD drive must be verified.

  Good luck buddy

• Satellite L300D PSLC0C - need to sound and display driver for Win XP

  Hello everyone

  I have toshiba Satellite L300D PSLC0C.
  I recently installed Windows Xp on it and now I'm not able to get the display driver and audio drivers.
  I tried after the display drivers and sound respectively, but they both failed to install
  [Display driver | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 784 & selSho rtMod = null & language = 13 & selOS = 10 & selType = 11 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 4 & is lectedLanguage = 13 & type = 11 & page = 1 & ID = 63947 & DISO = 10 & driverLanguage = 42]
  [Driver sound | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 784 & selSho rtMod = null & language = 13 & selOS = 10 & selType = 42 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 4 & is lectedLanguage = 13 & type = 42 & page = 1 & ID = 63958 & DISO = 10 & driverLanguage = 42]
  Also I get an exclamation with PCI device and Bus SMB controller in Device Manager. I tried following Chipset utility, but it did not work.
  [Chip Set Utility | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 784 & selSho rtMod = null & language = 13 & selOS = 10 & selType = 94 & ADOs = yearupl & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 4 & is lectedLanguage = 13 & type = 94 & page = 1 & ID = 63940 & DISO = 10 & driverLanguage = 42]
  I'm really looking forward to any help on this

  Hello

  Because the laptop uses the ATI graphics card, you will need to install the driver of ATI graphics card. I think that you need the driver for the ATI Radeon X 1200 control some pages like omegadrivers.net and similar
  The chipset driver is an ATI due to AMD CPU driver.

  Audio driver seems to be Realtek.
  I recommend that you visit the page of Realtek and download the driver of the page.

• Satellite L300D-13s - how can I restore with corrupted disk 2

  The laptop is a Satellite L300D-13 s.

  I tried to restore the laptop using the restore discs, the first disc has worked well, but he did not recognize the second disk. No matter what I have I could not get to read this disc.

  I then tried the F8 option of us to restore the drive, but I got the missing Bootmgr message. I tried F8 using the DVD, but it doesn't have a restore option.

  Using the option to boot with a record I did access the E drive and discovers the HDDRecovery directory but not found something that would allow me to run a restore.

  Y at - it an option to do a restore in this way, or can I restore another way?

  Your help would be appreciated gratefully.

  Hello

  Recovery procedure can be performed on two tracks:
  -Via recovery CD/DVD or
  -From the HDD recovery procedure

  If there is problem with the created discs, then you should try to use the second option. It works as follows:
  -Start your laptop and press F8 for Advanced Startup Options
  -Here you will see the option to fix my computer
  -Choose this option and follow the on-screen menu.
  -Then, you will encounter the system recovery options
  -The last option is the Toshiba recovery procedure. Select it and follow the on-screen menu.

  Please note: this will work if you didn t change partition structure, installed OS clean or deleted the folder HDDRecovery.

  At the end I have to say, if nothing helps, and if you are not able to install the OS by using one of these methods I see a solution only: you must order the new recovery DVDs.

• Satellite L300D-13s - need advice on equipment specifications

  He is able to play manager s 09 on Satellite L300D-13 football?
  Posted the: December 21, 2008 03:30 reply

  Hello!

  Just like to know if Toshiba L300-13 s is - this good is the specification of the computer.

  Processor: AMD Turion X 2 processor Mobile Dual - Core RM-70
  Clock speed: 2.0 GHz
  level 2: 1 MB cache

  Standard system memory: 3 072 (2 048 + 1 024) MB
  Maximum extension: 8 192 MB
  Technology: DDR2 RAM (800 MHz)

  The graphic card manufacturer: ATI
  Type: ATI Radeon X 3100 graphics card
  Memory: up to 1 407 MB total graphics memory available with 3 GB of system memory
  Memory type: shared

  I see no reason for this material standard are not good. Of course, I don't know for which purposes you need from your computer but with this one you can run Vista very well and for good price you will have portable solid.

  I like this 17 laptops, but I prefer Design P. Satellite P300 satellite is for me a lot better and it seem also more noble than the series L. In any case, all of us have different opinions and taste. Isn t it? ;)

• Satellite L300D-13s - CD/DVD drive does not close properly

  Hello

  I have the L300D-13s, about a week.
  Today and for a short time last Sunday the DVD drawer is not closed.
  I rebooted several times and tried to put the disc in but again, she is ejected and does not read disks.

  I installed Norton 360 Version 2.0 the day I got it, I really don't know much about computers and I hope that it's fairly simple.

  I checked the control panel and checked all the settings and they all seem fine.

  I'd appreciate any help.

  Thank you.

  Hello

  I think it s a mechanical problem of CD/DVD disc and you should contact the ASP in your country for a control.
  I mean that the guarantee must be valid because this laptop does not seem to be old.
  Therefore ask the ASP, and maybe the CD/DVD drive must be replaced.

  Good bye