Satellite L300D - black screen on startup

Hi guys, I need help please. On Thursday, I was on my computer and noticed that the weather was bad, I thought I have to do something wrong and were going to remedy. I went to my computer, but it wouldn't boot just had a black screen. I knew that I didn't damage the display. After a bit of research on Google I read to take out the battery and plug the charger in and low and behold, it worked!

Friday, I charged my battery for an hour and put it in the computer and that worked too so I thought that the problem has been resolved.

Unfortunately today my computer does not start with or without the battery to still get the black screen. Fan runs but apart from that very quiet sound. I tried putting the cd in see if that would be nothing, but it didn't.

Any suggestions please?

Try this:
Unplug the AC adapter and the battery. Press the power button / stop along 30 sec.
Connect the battery and the AC adapter and turn on unit t - it work?
If this is not the case, connect an external monitor and check if something would be visible on 2nd screen
If anything wouldn't show so I suppose you ve you have a motherboard serious hardware problem

Tags: Toshiba

Similar Questions

  • Satellite A100 - black screen on startup

    For two days my laptop Toshiba A100-495 / model-No. PSAA9E-18F047GR / Y6065357Q with Windows XP SP3 serial shows a black screen at startup. There is still no picture Windows startup.

    The laptop is all starting, but after finishing and be ready for use, the screen is always black. When I am pressing Fn + F5 keys, the desktop appears.

    The black screen is only starting cold after stopping, not awareness of standby or pause.

    > When I am pressing Fn + F5 keys, the desktop appears

    It seems that the display output is set to external monitor
    You see the Toshiba start screen if the laptop is connected to the external monitor?
    Check it!

    In addition, I am agree with Akuma BIOS should be the default value.
    To access the BIOS F2 press while turning on the laptop. I hope that you can do this then press F9 for default settings and then exit the BIOS save settings.

  • Satellite L300D: black screen during boot - stuck on classpnp.sys & repair

    Hi I have 3 year old Toshiba L300D.
    1 year back I upgraded vista to windows 7 Home premium.

    3 days back I had problem - my windows start page was hanged and was not forward, also all types of safe mode was stuck on classpnp.sys.

    After reading many forums, I started with USB (with windows 7) and use command prompt and all 'pcmcia' realted deleted files from drive C. Now using function F8

    I can't use any option (all the safe mode option, low resolution, restarting, etc. doesn't work, even in the Bios configuration changes will not work). Also now start my PC with USB, after the start of the windows black screen page appears with the white arrow and it will not go further this black screen so I can't even use now guest & installation option.

    Now, I don't know what to do :(
    Any help will be appreciated :)

    Hello

    The classpnp.sys seems to belong to «service Plug & Play of Windows 7»
    Connect USB devices to the laptop?
    Try to start the unit without the connected USB devices.

    In the worst case, you have to reinstall the OS using the recovery disk if F8 and all other Repair Options would not work.
    But in my view inevitable painful s

  • Satellite L640 - black screen on startup

    When I go to start the portable computer I only get a black screen. I can hear things fan and the startup sound happens to connect but only a black screen.

    Any suggestions to solve this problem would be great!

    For better understanding, you should put a little more useful information. Who knows what you do with your machine.

    What operating system do you use? What was your last step when everything worked OK?
    Normal shutdown of OS?

  • Satellite L300D - black screen but powers and FN light answer

    Hi, I have my friend L300D that is given to me to be fixed. I'm not a technician, but the kind of interested in the business of fixing :)

    Recently laptop screen just went black.

    Symptoms:
    -Laptop power on when you press the power button, but nothing coming screen.
    -Caps lock does not respond when you press him.
    -No hard drive light not flashing.
    -Power LED light and adapter lights up constantly.
    -Caps lock flashes once the first second
    -Laptop seems to continue to run with black screen but does restart or turn off.
    -Fan turns and no problem of heat.
    -Laptop can always power off when you you press power button for 5 seconds.
    -Is no beep or display any changes then from these modules removed from ram.

    He looks dead to me, but fortunately, it's not quite dead because the FN button seems blinking light under the F10 key. It is the only evidence that I have on this laptop telling me that it is not quite dead.

    I tried to put the latest bios file in a floppy 1.44 MB fat16 formatted in a usb floppy drive and the f key down before I plug in the charger, but still no change. I also tried B of WIN, the FN B, WIN ESC, the FN ESC.

    Please can someone give me some advice.

    Hello

    For me, it looks like serious hardware problem.
    What you can do is to test the device with an external monitor:
    Connect the external display and check if you see something like start screen for Toshiba, etc if you see something like that, then internal laptop screen is defective and must be replaced if not if nothing would seem-> the related problem of the motherboard.

  • Satellite M70 - black screen on startup

    Hello!

    I have a problem with my Satellite M70-309, so for two times after logo Toshiba, Windows Xp (home sp2) does not start.
    The result is a WHITE & BLACK SCREEN.
    So I turned off manually appeared then black screen where I can choose if starting normally, last good configuration etc...

    That's happened?
    Is a hardware problem? Because my cpu died last month I changed it.

    Thank you!
    (Sorry for my English I'm Italian)

    Hi, RSC

    It is not easy to tell what can be the problem, but I assume that there is something wrong with the HARD drive. It will be interesting what happens with the new HARD drive.

    If possible also start the recovery procedure to see if the HARD drive will be recognized correctly and if the recovery procedure starts correctly. Check it using the installation in expert mode where you have access to information from HARD drive (partitions and so on).

  • Satelite L300D - black screen on startup

    Hi people,

    Any help would be greatly appreciated.

    I have a Toshiba Satelite L300D-11V. I don't know what is happening, but now whenever I try to power I just get a black screen, a power led and a no. HDD activity.

    What I've read I think I need to Flash the Bios, but I seem to be struggling with this.

    Everyone flashed sucesfully? Any tips?

    To me, it looks like screw at the top of the BIOS?
    Have you tried to update the BIOS last days?

  • Satellite P300 - black screen on startup

    Hey,.

    My book freezes the other day and then stop. Since he was unable to rebot. Are power and battery light and when I go to turn it on it lights up and will ether stay on for 5 seconds and turn off or stay on but always with a black screen.

    Anyone of you guys please help.

    Hello

    In your case, I would first check the memory modules.
    The point is that a faulty module would affect the startup process of laptop you would not be able to access the BIOS, if the modules are defective.

    You said that the laptop shut down it would mean that temperature is rising to a higher level and so the laptop turned off to avoid the equipment against damage

    In your case, all may be possible as I said; RAM should be checked initially, if the Rams are ok, then other parts like the CPU and motherboard must be verified
    I think you don't have much experience, and not enough resources to run tests and this is why I recommend to contact a technician. The professional guys could test parts and eventually could replace

  • Satellite L300D - black screen

    Hello, I'm new here, I have a problem with my 3 year old * Toshiba L300D.*
    Today I started my computer without an attaché of the mouse (I have some problems with the touchpad), I searched for some documents, found them and closing the laptop with + alt + f4 - stop +. Everything was ok, I used to work without a mouse, but after a few hours, I decided to start the laptop to copy documents on a USB key, but this time the * computer has not started, fans are up, the power led is green *, HQ is green (if I plug the power adapter) * and the battery is orange * (if the power adapter is connected). Do I have to mention is... that I use this laptop very well, and the battery was not customary for almost 1 year. I have updated the bios to the latest version of the bios, Insyde toshiba a while ago website, everything was fine, so far.

    Another thing, _I have no beeps or nothing_, the * screen is black * until I stopped pc (remove the battery or the AC adapter), the power button 30 + s dosen't also affect the laptop, if I remove the two ram module the computer just reboots, nothing else. I disassembled the laptop, the motherboard seems ok, the HARD drive is ok, I managed to copy my files with a HARD drive rack.

    I don't know what else to do. _Also if I turn on the laptop now F computer, the computer stops and the computer turns on again. _

    If I understand you right display is dead, black, no reaction, no? You don't see anything on the screen?
    I put t know if you can do but try to connect external monitor to your laptop just to see if there is a reaction on external display.
    > Also if I turn on the laptop now F computer...
    Why F? What would happen if you hold the F key at startup?

  • Satellite L755D: black screen after startup or switching of external monitor

    I have a strange problem with my Satellite L755D. I normally use an external monitor that works very well.

    If I want to switch to the laptops monitor using Fn + F5, the laptop monitor remains dark, but you can see (more guessing) office.

    Just the bright background lights. Same thing if I boot without the external monitor. In the beginning (phase BIOS?), you can see the normal symbols, then the screen turns to.

    Funny, is that these two problems do not appear when I cut the power supply and the laptop runs on battery only.
    Any ideas, what the reason could be?

    Thank you
    Mason

    Funny, is that these two problems do not appear when I cut the power supply and the laptop runs on battery only.

    Maybe you should check the configuration of power plan that is used only in battery mode.
    It might be possible that the backlight settings have been set at a lower value by using the power of the battery.
    I recommend you to check this in the ATI catalyst and windows power options.

  • Satellite A300 - black screen on startup

    Hello

    I have display problems with my Toshiba Satellite A300 series laptop PC, like when I turn on my laptop I can hear the sound when the system is under the boot, but I do not see the screen. Everything I do is just try to force stop with button / stop if it does not then iam does for one several times.

    Thanks in advance,
    Naveen

    If possible try to connect the external monitor to your laptop and check if you can see something there.
    You know, on this virtual path, it is not easy to say why this happens.
    It may be faulty laptop screen, problems of connections or graphics card failure.

    It is not easy to say why this is happening.

  • Satellite L300 - black screen on startup

    Hello

    I have the Satellite L300 nine out of the box, I used it twice now, when I turn it on the power light turns on but no screen.
    Does anyone have a solution?

    See Toshiba welcome screen?
    Finished configuration of the operating system (after the first start)?

  • Satellite A100: Black screen on startup of windows

    Hello everyone,

    my screen doesn't show anything until windows XP starts. No toshiba start screen, no boot menu. The rest works batteries, no errors. I would like to have the normal start with: "press del to enter setup" etc.

    Thanks for the help

    Hello

    Something like press DELETE to enter Setup does not appear because usually, at the beginning, only the Toshiba start screen should appear.
    If you want to get into the BIOS you press "F2". Pressing the DEL you will not enter the BIOS. It s a notebook, not a desktop PC, my friend ;)

    What you can do is to disable Quiet Boot in the BIOS. Then active diagnosis and summary screen appears.

  • Satellite A305-S6898 - half black screen at startup

    I bought this laptop in early March and had to return to store due to a problem at startup when half of the screen would be black on the Windows login screen. They ordered me a new I got about 3 weeks ago and I used it for about a week before I had the same problem of a half black screen on startup.

    Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.
    I had to reboot in safe mode and run a virus scan just to make sure it wasn't my problem.

    I do not download anything on this computer other than basic messengers and photo editing programs.
    I have a HP MP7170N desktop computer which I use to download everything that seems to work faster than the laptop and I use photo, download torrents programs and store most of my pictures and music on this one and it has only 1 GB of memory compared to this the 4 GB.

    What is the problem?
    Anyone have any ideas as to what I can do.
    I can't really go back to the shop because they give only a grace period of 14 days for returns.

    > I had the same problem of a half black screen on startup.
    > Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.

    Doesn't look good for me it sounds a bit like graphic problem.
    Before contacting a professional Toshiba authorized service provider would be, it would be interesting to know if you have seen improvements after recovery procedure and BIOS updated.
    I think you n t get a recovery disk because you can create it using the verification of software preinstalled Toshiba manual how to create the recovery disk

    If, after installing new check usability of portable and so similar issues still persists.
    If nothing will change it s is strongly recommended to communicate with an ASP.

  • Black screen on startup Satellite A80

    I get a black screen at startup what is the problem and what is the solution for it? It might have something to do with the cold?

    Hi poly

    Please put more details on the problem, because it s not easy to say what has happened without any detailed information. You hear the operation of the HARD disk or fans?
    Switch you to other devices to display, before this problem occurs?
    Unfortunately it FN + F5 key combination doesn't work if the operating system has started so it could be a malfunction of the equipment. I don t think you can solve this problem by yourself. In this case, the only way is to contact the service.

Maybe you are looking for

  • OfficeJet Pro 8500 leaking blue ink.

    I'm trying to disassemble the printer to gain access to the rear of the cartridge that assembles. I'm unable to remove the side panel of the case. Advice or suggestions appreciated! If I find the leak at the back of the Assembly, is - this repairable

  • How to prevent the "CreativeProjects" trying to install

    CreativeProjects keeps trying to install it. going up then stops what is. I don't want to.

  • Cannot install Lenovo Onekey Recovery

    I just downloaded the Onekey Recovery for 530 Y, but I can't seem to install it. I accidentally uninstalled the previous, and now I can't get it back. When I tried to install it, I get an error sayinig "this software can only be installed on a Lenovo

  • HP Compaq TC1100 screen problems

    just recently, happened once when it lights at the beginning that it displays the letters scattered across the screen, and then loading it show is I think the 8-bit colors and see the kind of blocks, pictures of him are lower. Some else has had this

  • My MMC, COMPMGMT. MSC refused to open.

    every time I want to open compmgmt.msc "MMC will not work with a version of Internet Explorer prior to version Internet Explorer 5.5" happens what to do to fix this?