Satellite L300D BSOD after upgrade to Windows 7

I got this laptop (Satellite L300D) for a little more than a year with windows vista (32-bit) running and there were no problems. However, I've recently upgraded to Windows 7 (x 64) and became the problems since the first reboot.

On the first reboot after installing windows 7, the computer off just after the "Starting Windows" screen Turn on again took me to the repair of the system where he performed a system restore and I was able to start successfully even once. I thought that the problem had something to do with the automatic updates, so I disabled the and tried to restart to see if the problem has been corrected. This time, after the "Starting Windows" screen I got a BSOD of unrecoverable system error. After several attempts to reboot and multiple attempts to repair system (which usually says she didn't) it started correctly again.

This problem has been going for about 3 weeks now and it is quite irritating. The results of the system of compensation for claims that a "Boot critical file is corrupt", but it starts eventually after several attempts to start. He also has a habit of turning at random during the race (it happens about once or twice a day). So from now on, whenever I chaque fois que je tente tries to start my computer it shuts down after the start screen or give the BSOD and restarts and the only way to make it work seems to be to keep trying to start and hope for a successful boot of the system upward (this happens finally after a few failed attempts).

I did some research on this and came to [this | 1251 http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L300D-ST3501&rpn=PSLC8U&category=&selCategory=3&moid=222 & os = & ct = DL & selFamily = 1073768663] page. I think that's exactly what my problem is (need to update the BIOS), but if I understand correctly installing windows to do this only for 2000/xp/vista and I am unable to use the second option to boot from the disc as I get the BSOD before he gets to that point. I should try the windows install option although I am running windows 7 or is there another way to update the BIOS? Or I'm off completely and the problem is with something else?

I wasn't sure what information I would like to add to this post so if need more information please let me know.

Thanks in advance

Edit: Oops, just realized the page I linked is not link to exactly what I had opened. I do not speak of 'critical BIOS updates for Windows 7 64-bit' under 'support form '.

Post edited by: Jacob27

Hello

First of all, it would be interesting to know what code BSOD, you get exactly. Can you post this information useful? Normally, on the Microsoft Knowledge Base, you can find additional information about most of the BSOD codes and so you can start to solve this problem.

BSODS are often associated with drivers or RAM/HDD. The latter, you can check with special diagnostic tools, Memtest86 for RAM and Drive Fitness Test for the HARD drive. These two tools are free and you can find it using Google. You can download an iso image of them to create a bootable media where you can start the test.

Regarding your update to the BIOS: I put t know what L300D you have exactly, but according to the Toshiba site it shows an update of the BIOS also for Windows 7 64-bit. You can try to install it.

Tags: Toshiba

Similar Questions

  • Satellite L300-215 - BSOD after upgrade to Windows 7

    Just upgraded 32 bit Vista to Windows 7 32 bit but keep getting BSOD (Blue Screen Of Death) when using the laptop. The events of the problem like log file below and it fails every time is same error code except BCP2 can change different Hex value.

    Have Toshiba upgrade disks used and all uninstalled programs that he asked me to do it before installing Windows. Model is L300-215 and laptop worked OK before upgrading to Windows 7. Have you tried the drivers audio and graphics of the site Web of Toshiba (old version of what was on the laptop after upgrade), but always the same question :-(

    Any help would be appreciated if someone else seen this error before?

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7600.2.0.0.768.3
    Locale ID: 2057

    More information about the problem:
    BCCode: 4th
    BCP1: 00000007
    BCP2: 000B458A
    BCP3: 00000001
    BCP4: 00000000
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1

    Hello

    When you get exactly this BSOD? Happens immediately or if you start a certain application?

    Have you checked for yellow exclamation marks Device Manager? Maybe a driver isn t working properly and you should update it.

    Also make sure that your BIOS is up to date. You can download the latest version on the Toshiba site.

    Last but not least blue screen often associated drivers or memory modules defective RAM. The latter you can check using Memtest86.

  • Satellite Pro L40 - after upgrade to Windows 7, the FN keys do not work

    Hello world

    I have a Satellite Pro L40 PSL4BE and have just upgraded to Windows 7. Since the upgrade I can no longer use the function key and the top and down arrows to control the volume. Keys F6 F7 & still control the brightness so I don't know the function key still works.

    Anyone know if it is a driver problem or nobody knows how to solve this problem?

    Thank you

    Drew.

    Hello

    You need to install the package of value added for Satellite Pro L40. This package contains all the necessary drivers for the FN keys. Then please install or update VAP if you have already installed an earlier version.
    Here you can download: http://eu.computers.toshiba-europe.com > support & downloads > download drivers

    Can you confirm that FN keys work with installed VAP?

  • Re: Satellite A300 - battery after upgrading to Windows 7

    Hi all

    I have with me the notebook toshiba Satellite A300.
    Bought the UNITED Arab Emirates. I just upgraded my pc to windows 7 and it seems to have affected my battery life, I guess.

    Anyone has idea about hw long battery last, I mean hours.

    Now, I can only use it for nearley 30 min... Some blog said of updateing the bios.

    Is this the reason realley or is the problem of windows 7 with my battery, experts advise please.

    Thank you, vb sbar

    Hello

    I don't know if the update of the BIOS would help, but if the new BIOS is available for you notebook series, then it s a m updated value.

    But you should also check the Win 7 power management settings.
    Please check this Toshiba HowTo:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

    It s on vista but Vista power management is very similar to Windows 7.

    Here you must change the battery more user-friendly options.
    Check it!

  • Satellite U500 - freezes after upgrade to Windows 7

    Hello

    I'm trying to upgrade from Vista home premium 64-bit Windows 7 Home premium 64 bit on a U500-119.

    After completion of the activation process, I started Windows 7, but the screen not appear and my U500 froze the message 'welcome. ' I was able to restart Windows 7 in repair mode, but I can not find which sw component prevents Windows 7 start and work in normal mode. Used the incorrect installation option, process automated instead of the custom one?

    What should I do, restore Vista from recovery of HARD drive and re-install Windows 7, this time using the perconnalised mode?

    Hey

    To be honest, I also don t know what software driver is causing this gel, but you can start Notepad in safe mode?

    In addition it of not possible to use HARD drive recovery anymore because you have installed another OS. In this case, you have the Toshiba Recovery disk to restore Windows Vista.

  • Random BSOD after upgrade to Windows 7 for Win Vista

    Hello

    I am getting random BSOD, system crashes etc... After that I updated to windows vista.

    It is not a custom built PC, but I checked the inside of the box

    Plug-

    Intel Core2Duo

    4 GB of Ram

    1 TB HARD DRIVE

    NVIDIA Gt 140

    (Big one) memory dump

    http://1drv.Ms/1pIf5US

    OM

    All first please change your control panel of the system to small (lernel) DMP.  It will save you a ton of time when you transfer files DMP.  You can read how in this wiki

    This accident was related to the corruption of memory, please run the Driver Verifier to find the underlying cause.

    These accidents were related to the corruption of memory (probably caused by McAfee).

    Please run these tests to check your memory and find which driver is causing the problem.


    If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

    Since then, it is more likely to be a pilot run everything first.
    1-Driver Verifier (for full instructions, see our wiki here)

    If the auditor does not have the issue we move to it.

    2-Memtest. (You can learn more about running memtest here)


    If you cannot start after you have enabled the auditor reboot in safe mode
    In Vista & win 7 (F8)

    Co-written by JMH3143

    .

  • Satellite L300D BSOD on reboot after updates to Win7 64 bit

    Satellite L300D BSOD on reboot after updates to Windows on Win7 64-bit (toshiba version). Restoration of the system, safe mode, nothing helps.

    I am now installing the 32-bit version, but hey, 64-bit must be possible, does it not?
    I'm open to good ideas.

    Thanks much for this information.
    Seems the BIOS update would solve the BSOD with Win 7 64 bit OS problems

    Welcome.

  • No CD/DVD drive after upgrade of Windows 8 on Satellite Pro S300L

    The cd Rom drive no longer works after upgrade to Windows 8.
    The drive is not displayed in the Solution Explorer, either. It is mentioned: error in the register.

    I can not change the right driver in Device Manager - probably it was deleted.
    Is the driver of the * MATHSITA DVD-RAM UJ880AS drive * for Windows 8 available?

    How can I make my cd Rom drive working again?
    How can I fix the error?

    Could guide you me in registry change (upper and lower filters) if necessary?

    Post edited by: GRIX

    Hello

    Check please follow thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68988

    Here, you can find the solution to your problem.

  • Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

    My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

    Hey Buddy,

    What does it mean exactly when you say he won t work?
    You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

    At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

  • HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

    Hello

    2 days ago that I have upgraded to Windows 10 my HP ProBook 450 G0.

    Then I realized my graphics drivers are not working, I tried to update to the last registered in the section to download the drivers for my model.

    After that, I got BSOD and couldn't even see login screen. I removed the update installed in safe mode.

    If at the moment I use some default driver I guess.

    In the Device Manager on Intel(r) HD Graphics 4000 I something like (manual translation) "Windows has stopped this device because of disorders raported. (Code 43) ».

    I can't use the HDMI & display internal. To use the HDMI, I have to restart my PC. After using HDMI, I can't use internal display. A lot of questions, because this driver...

    I really need this, as I am a teacher and I ', using both internal display & HDMI for presentations...

    All solutions? All the newspapers that I can get to help you help me ?

    Kind regards

    Jakub Krol.

    Hello

    In case anyone is interested, my PC is now fixed

    More information: https://windowsforum.com/threads/graphics-issues-after-upgrade-to-windows-10-system_service_exception-sgfxk64-sys.220205/page-2 .

    Kind regards

    JK.

  • Random Blue Screen Of Death after upgrade to Windows 7 Ultimate 64 bit

    I was running Windows 7 Ultimate 32 bit for many years without any serious problem. After the upgrade to Windows 7 ultimate 64-bit I was prey to a BSOD random. Sometimes I can get several BSOD in one day. Sometimes I could get any same-day heavy after multitasking.  The BSOD may occur during any task or when I try to quit. I have the latest drivers and BIOS. I disconnected all my equipment and refurbished it. I used the diagnostic tools to test my memory 4G and my Seagate 1 t SSHD hybrid and they passed. I changed the sata connection cable my HD to the MB. I did a Windows repair (scannow) and also done a repair install and it did not help. Although these questions is past the BSOD after upgrade to Win 7 64 bit, that I suspect may not be associated with Win 64 bit but could be hardware related. Any help to solve this issue will be appreciated.

    Kind regards

    Chris

    All 5 associated with your ATI video driver.

    Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here
  • Apple Software Update will NOT work after upgrading to Windows 7

    Apple Software Update will NOT work after upgrading to Windows 7

    flyboy340 wrote:

    Apple Software Update will NOT work after upgrading to Windows 7

    More information is needed.

    Which machine you use, OS X are you running?

    Windows 7 running in BootCamp?

    The OS X app store is not present at all?

    AppStore is present but the update tab does not?

  • 700 - 230qe envy: after upgrade to Windows 10, I have no sound

    I have no sound after upgrading to Windows 10.  When I try to update driver I get error 0x8007001f Audio device IDT High Definition Audio CODEC.    Also get audio servicd without answering

    @gemini2

    Try this.

    1. Select the CODEC Audio IDT high definition in Device Manager.
    2. Select the driver tab.
    3. Click on update driver... button.
    4. -> Select Browse my computer for driver software.
    5. Select-> Let pick me from a list of drivers for devices on my computer.
    6. Select high definition Audio Device (not IDT High Def... that's important...) and click Next. Displays warning message, but the answer Yes.

    REO

  • Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

    My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

    Help please

    Hi asalamk,

    The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

    You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

  • HP Touchsmart 23-d055: do I need a new recovery disk after upgrade to Windows 10?

    I upgraded my 2 years, HP Touchsmart in Windows 8 for Windows 8.1 for Windows 10. It took me 6 hours to run all of these updates.

    Now, HP Support Assistant keeps reminding me to create an image of system recovery. But when I run the recovery media creation utility, it warns me that he goes back to the original operating system (Win8). Is it possible to create a recovery image system for my machine on Windows 10?

    I know that Windows 10 now has an automatic recovery partition. But I am concerned by the failure of the disk, which would make this unnecessary partition. Last year, when I've upgraded to win 8.1, I had an alteration of the disc that has occurred without known reason. I lost everything on the PC and to restore Win 8, and I've never touched the PC up to 10 Windows free update is out.

    I created a USB Win8 recovery disk when I got the machine. This is my only alternative? I suppose that if I ran the recovery media creation utility, it would recreate just the same.

    BTW, I know that HP has here a document, but it does on computers provided with Windows installed 10.

    Thank you for your help and experience.

    Since no one has replied with an answer to my question, I've finally worked it on my own. I learned that you cannot make a new recovery disk system after the upgrade to Windows 10, if you had already created one when you got your machine under Windows 8.x

    Context: after upgrade to Windows 10, the HP Support Assistant kept prompting me to create a system recovery disk.  I did one when I got the machine 2 years with Win8.  I didn't replace my original recovery disk, so I went out and got a new 16GB USB flash drive. When I inserted this new drive and attempted to create a recovery disk, the PC told me I couldn't do one, because you are allowed to make a recovery disc by PC.

    So it was kind of stupid that after completing the upgrade of Windows 10, HP Support Assistant tells people to do. It should just check itself and see if a disc has already been done. All this anguish for nothing!

Maybe you are looking for

  • 2 update install 3.1 but fails continually train

    When I tried to install turbo tax I kept getting erroe code 1601, who sends me to windows update to get the Installer 3.1 - but it fails everytime I try

  • SAP TAO

    We have SAP TAO working with QTP 11.0 and HP ALM 11.0. Now we're reclassification ALM of 11.0 to 11.5. should I HP Enterprise Integration Module for SAP Solution Manager updated and integrated to SAP TAO work properly with 11.5? We are not sure, beca

  • How can I download videos right from my Galaxy S3 on computer?

    I downloaded the pictures ok since the DCIM folder, but there seems not to be a folder with the videos in. Where can I find these?

  • Canon EOS 10 d no driver available for Windows version 7 or earlier version

    I recently acquired a Canon EOS 10 d, but windows does not recognize the camera and as such I can't retrieve the images from the camera I tried the American sites and support Global Canon but can't seem to find the drivers (even xp / vista for backwa

  • Connectivity Internet randomly loses

    Original title: internet connectivity Hi friends, when I connect with an internet connection run quitely and after 40 minutes, it's to close automatically, just after disconect I again to connect to the net it is easily quitelly running, but still 40