Satellite L300D - cannot open the ACPI ATK0100 kernel mode driver

Similar Questions

• SL500 - cannot open the ACPI ATK0100 Kernel Mode driver

  I installed Windows 7 (64-bit) and some of the drivers of Lenovo.

  Now, I get this message every time you start.

  Any ideas?

  uninstall the driver and the custom messege come, lenovo is not technically support windows 7, all other work drivers on my SL500 outside this driver, became the messege too, now I don't have after that I uninstalled it

• On Satellite A200 error message: could not open the ACPI ATK0100 Kernel Mode driver

  Hello

  I have laptop Satellite A200
  When I run the windows (vista) I get the following error: * 'Can t open ACPI ATK0100 Kernel Mode Driver.*'!
  I installed all the drivers and the error remains.
  I installed all the drivers on the Toshiba site, but the problem persists.
  The Device Manager shows me that each device is working properly.

  Someone at - it a solution?

  Thank you

  ACPI is the installation of your Windows operating system power management. If this fails you may need to run a recovery system on your computer. You can do this with the hidden partition on your hard drive, but this will erase all data on your machine. If this does not resolve the problem, you may consider making your hard drive, checked bad sectors, as this may have failed.

  I hope this helps. :)

• "Cannot Open ACPI ATK0100 Kernel Mode Driver" on G560

  Hello world.

  I have downgraded my Windows7, Windows XP machine and after reboot appear this pop-up message: "CAN Open ACPI ATK0100 Kernel Mode Driver. I was reading another post for the same problem but I don't know what I can use these instructions for my laptop model G560.

  Help, please!

  Thank you

  Try re - install

• Satellite Pro L300 shows ACPI ATK0100 Kernel Mode Driver error

  I have a Satellite Pro L300 with Windows Vista and it has been fickle to say the least, making me restart the system several times.
  The last two times she since continued to come up with an error message saying "cannot open ACPI ATK0100 Kernel Mode Driver", and I understand that it is perhaps what is originally that there problems later.

  I tried updating the BIOS, reinstall the drivers and, seeking answers and, of course, reinstall the whole system, but I still get this message every time I turn on my laptop and I really don't want that it gives me the blue screen of death again - please help me!

  Thank you.

  Stand by.

  You ve done clean install of Vista with initial recovery DVDs and you get this error in any case (no additional software is installed)?

• Satellite U400 (PSU44E) - ACPI ATK0100 Kernel Mode Driver missing

  Satellite U400-17V (PSU44E)

  I received my upgrade of Windows 7 at Toshiba with the included DVD upgrade. I did everything exactly what is said in the booklet.

  After completing the upgrade process and after turning on the laptop I got the message saying:
  Can not find an ACPI ATK0100 Kernel Mode driver

  What should I do?

  Best regards
  Tan Tunc

  Hello

  I started a thread on the same subject:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=126340

  So for me it sounds like this, you should try to reinstall Windows again. After that, the problem should be solved.

  Search with Google, you can find enough discussion about it. Reinstalling Windows can solve this problem.

• Unable to open driver ACPI ATK0100 Kernel Mode - Tecra A9

  Hello

  I reinstalled Windows Vista business on a Toshiba Tecra A9 with the restoration of dvd.
  After that, I'm getting more error: could not open the ACPI ATK0100 Kernel Mode driver.

  I installed all the drivers and the error remains.
  I downloaded all the drivers on the Toshiba site and installed these, but the question remains.
  The Device Manager shows me that each device is working properly.

  Someone at - it an idea?

  Thanks in advance.

  Paul

  Hello

  > I have reinstalled Windows Vista business on a Toshiba Tecra A9 with the restoration of dvd.

  Have you used the Toshiba Recovery CD or did you install Vista using the Microsoft Vista DVD?

  If you used the recovery CD Toshiba n you no need to download and install page of the Toshiba driver Vista drivers. The Toshiba Recovery CD already contains these drivers.

  In any case, I'd appreciate more feedback from you

• Satellite A300 - cannot open the SD card

  Hello

  as you know, I won a Satellite A300, but my card reader does not work correctly. After inserting the card, it takes a long time to identify the card, then in my computer, the symbol appears but when I click to open the symbol "SD Deca", IE the map need to layout form or 'Please insert a card in the reader. Please note that the same card get identified in the external as usual card and card reader work entirely respective mobile (for micro SD) and the camera (SD).

  If I connect the mobile / camera by usb, no problem, everything is normal.

  Please suggest me how to fix card reader?

  Thanks in advance.

  Dimitri.

  Hi smarjit1,

  Have you tried different SD cards or just this one SD card? The SD card is probably the problem, what do you think?

  In addition, I would like to try an update card reader driver. The most recent driver, you can download on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Check this box!

• Satellite P200: Cannot open the Power Saver - fatal error in Windows XP Home edition

  Hello

  I just installed XP and I came across a problem that is boring. When I finished to install Power Saver and the driver, I got a message saying fatal error and I thought it was because I haven't restarted. Then, after only a day or 2 later I went to the energy saver and he said cannot open because you don't have access rights to "Toshiba Power Saver.

  Is there a solution to this
  Neo-Tech

  Hello

  I put t know if this is a solution but try my proposal:
  First of all, remember that you are registered as an administrator or make sure that you have administrator rights.

  Remove your old system energy saving. You must remove the driver and utility.
  Then reinstall the computer and clean the registry using the freeware like CCleaner.

  Then install the driver of saver of power and after reboot the new install standby power plant.

  I hope it helps

• Satellite L300D - cannot find the XP driver for the graphics card

  Hello

  I just bought a Toshiba Satellite L300D and I installed Windows XP (instead of vista, which was preinstalled). I can't find the XP driver for the graphics card... Everest recognizes him as ATI RS690M. A download link will send me straight to heaven!

  Thank you in advance,

  Nikos

  PS. of course, I searched the display on the sites of several Toshiba driver and I got this message: "the resource you are looking for has been removed, had its name changed, or is temporarily unavailable."

  After that, I tried the driver from ATI, and it seems that they are more home driver for XP.

• Cannot open the Adobe reader protected mode due to incompatibility with your system configuration.

  Original title: trying to open a PDF file problems

  I use Windows 7 on a 32-bit computer with Firefox and Adobe Reader X 1.  Try to open a PDF with any application or attempt to open Adobe Reader via the icon programs, product now the following error message:

  «Adobe reader could not open protected mode due to incompatibility with the system configuration you.» Want to open Acrobat Reader with protected Mode off? "Answer either 'Yes' to this question produces:"Adobe could not load the DLL base. "

  On other occasions, trying to open the pdf file has directed me to an interface recommending me to open it with my Canon printer.  Try to change the default program used on a PDF file generates the above error messages previously.

  I reinstalled Adobe and who did it.  Clearly a problem for Adobe.  Regret not having tried that earlier, I thought that it couldn't be that simple.

• Used the external drive for catalog/photos for months. Yesterday-> error msg: "LR cannot open the catalog"StanLRCatalogRepaired"on"Seagate Drive - LR Photos"because LR cannot save changes to this place. LR catalogs cannot be opened on removable disks,

  Used the external drive for catalog/photos for months. Yesterday-> error msg: "Lightroom can't open the catalog named"StanLRCatalogRepaired"located on the 'Seagate Drive - LR Photos' volume because Lightroom can't save the changes to this place. Lightroom catalogs not opening on the network volumes, removable storage, or read only volumes. »

  The first thing to do is to check if somehow the permissions for the drive Seagate or any of its relevant folders/subfolders has changed somehow (an OS update maybe?)

• Cannot open the Lightroom catalog on external drive

  Please excuse the screen name. I tried so much to during registration, but they were all taken while I was sure that it would be available.

  I'm moving from a PC to a Mac laptop.

  I copied my drive whole photo on an external drive, which is what I use with my laptop. My catalogue and photos are stored on this external hard drive and when I try to open the catalog, I get the following error:

  Lightroom does not start with this catalogue. It is on a network volume or a volume on which Lightroom is unable to save the changes. But I have no problem opening an image in Photoshop so I know not the files being copied in a readable format.

  Ideas?

  Hi somedaymetalkpretty

  I suspect that your external drive is formatted with the NTFS file system, which is normal for Windows, but impossible to write in Mac. You will need to use an external hard drive formatted to FAT32 if you want to use in Windows and Mac.

  Beat

  PS: I guess that your catalog (.lrcat file) does not exceed 4GB, otherwise you would have a problem with FAT32.

  Post edited by: b_gossweiler: added for FAT32 file size limit

• Satellite L455D - cannot open the lid

  I got a Toshiba Satellite L455D-S5976 laptop for about 2 years. The other day when I went to check the daily messages, the cover has come practically out of it! I had left the laptop the night before waiting for things to download, because it takes forever for this laptop to do anything. I ve done before without incident, so I didn t expect something. Its perfectly fine opening (although the bottom, a keyboard and trackpad felt hot enough to burn me), but when I closed there was a sound of cracking type and closed the lid twisted.
  A little freaked out by the break at random, I turned it around look at the back.

  There was a piece of metal that comes out like a thumb at the back and a small piece of broken metal fell. I can t even open it now. I guess a part inside the laptop has melted and he does.

  Is that what someone else had a problem like this or know what to do to get it resolved?

  I n t have problem in the past but I think that laptop must be disassembled and checked what is the problem.
  It is not easy to discuss these issues on virtual path.
  The question is what you can do now. You can try laptop disassembly only, but if you n t have experience with this, it can be quite risky. Small error can ends with racks made of plastic broken or laptop Briefcase.

  I don t know buddy, maybe you should seek professional help and communicate with the service of Toshiba.

  What do you think of all this?

• Satellite L300D cannot detect the wireless printer

  Bought an advent AW10 wireless printer that is connected to my router from sky.
  The laptop cannot detect if. I managed dected on netbook to my daughter so I know this isn't a problem with the printer or router and I also tried detect it with the firewall disabled to rule out the possibility of being blocked.

  Does anyone have other ideas?

  The interest to buy this printer was so that it can be connected wireless to want do not connect through a USB cable.

  Hello

  Have you turned on the WiFi on the laptop Toshiba successfully?
  You must move the switch wireless POSITION until led WLan would be on and must use the FN + F8 option to select Wlan.