Satellite L300D do I need mediaback disc Toshiba to restore the system?

Similar Questions

• Satellite P300D-136 - how to restore the system?

  Hello

  I own a Toshiba Satellite P300D-136 with Windows 7 (64-bit) and I want to restore the system. I've tried the way by clicking on the value 0 or F8 at startup, but it does not :-(

  The HDDRestore Partition is available...

  Best regards

  Andi

  As far as I know Satellite P300/P300D comes with Vista and not with Win7 for Win7 installation drive recovery HARD work not at all. You can install Vista, maybe, but certainly not Win7.

  Because of this, I assume that you have installed your own version of Win7. Can you confirm this?

  Is that HARD drive recovery facility (F8 > fix my computer) works with the installation of recovery only (out of the box).

• How to restore the system to Satellite L750-A010?

  What is the possibility of recovery system for extracting device L750-a010?

  You can choose a HARD recovery disk or you can create a recovery disk and could use the floppy disk to restore the system.

  The recovery disk must be created using pre-installed tool called Toshiba Recovery Media Creator.
  HARD drive recovery can be started by pressing the F8 key (by turning on the device)-> fix my computer-> drive HARD recovery

• Satellite L300D-10 q recovery DVD Can be used on the replacement hard drive?

  Hello

  I was wondering if the DVD Recovery allows to install Vista on a replacement hard drive? The original hard drive is too small at 160 GB contain all the files that I use the virtual operating system image. The disk hard 500 GB of replacement must be large enough for that.

  The reason why I need to Vista, it's that the 32-bit and 64-bit versions of Ubuntu 8.04.1 and 8.10, cause the fan to run at full speed all the time which is very annoying. So for the moment I can only use Linux in a virtual machine.

  I intend to stay with Toshiba, though, as my two latest portable Toshiba Satellite a PII and a PIII still work today, and both have had Linux on them.

  Now, back to my story, I intend to remove the existing laptop, hard drive use DVD recovery to install to external USB 500 GB disk, replace the existing hard drive in starting up the laptop from the USB and copy my data overall. Before you reformat the old drive as external storage, I will replace in the laptop with 500 GB drive and the test so I can boot from the new drive.

  Key question will be the change of equipment, i.e. the new hard disk of 500 GB prevent Vista to install or activate?

  Thank you very much

  Vista itself can handle huge HARD drive sizes, but the question is: the recovery disc will be happy with 500 GB? The laptop will recognize 500 GB?

  I think it will work very well, because the new laptops are released with 320 HARD drive. 500 GB is not far.

  Its a few trial and error unless anyone here has tested a disc 500 GB HARD themselves.

• Satellite L300D - TEMPRO said that I have no space on the HARD drive

  Hello

  I'm new to the site... I got a L300D for three months and no problem but in the last two weeks, I had TEMPRO warns my readers have free space that disappears quickly.

  In fact at this moment I have a total of * 800Mbs * when in fact I more than * 90Gbs * and I even used a shedder file to clean up more space.
  Is there a way to get TEMPRO on track or is this a normal problem, unsolveable.

  Hey Buddy

  TEMPRO is a tool that scans the entire HARD drive
  I guess you have different partitions on the HARD drive and I guess Tempro tells you that the free space among available partitions_ _on breaks down

  Well, I'm not quite sure what partition is a sense but perhaps hidden partition Vista first, s (WinRE).
  You should know that Vista uses a hidden backup files partition, this partition can be used if something goes wrong with the operating system

  I think Tempro means that partition

• Satellite Pro L100 132: old RAM is not recognized by the system

  The original memory of our laptop (Satellite Pro L100-132) is 512 MB.

  I bought an extra memory to 1 GB (type has been verified in the product documentation).
  I installed the additional memory, the system starts and you can see the additional 1 GB memory.

  However, the system does not see the original memory of 512 MB, additional memory is installed on the laptop.

  The system should see memory original and extra, because according to the specification for the serial number of the cell phone (checked on the official website of Toshiba) the maximum memory (which can see the system) is 2 GB.

  I tried to transpose the place of original and additional memory between them, but the problem is the same.
  Updated the system BIOS does not solve the problem at all.

  Hello

  As writes the user above, there seems to be problem of compatibility and updating the BIOS will not help you. A malfunction of the compatibility between the old and new module of RAM which s

  This new module of RAM you bought?

  I think you need two modules of RAM high quality they are compatible together. You can order these ASP RAM modules in your country. Quad has already posted part numbers.

  Check this box!

• Satellite T210 problem of speaker sound audio (T210-112) if the system is moved

  * Phone: Satellite *.
  * Model: T210-112 *.
  * Operating system: Windows 7 *.
  Condition: new
  Versions of BIOS/Driver: unknown

  * Symptoms: *.
  * When the phone is picked up, fixed, tilted or moved * in the air during audio playback the * noise reverberates * for a short period until the system is stationary again.
  To describe more in detail, the 'sound-bite' which plays currently gets stuck and repeats several times quickly and then continues to normal playback. Let's say, for example the audio clip plays someone who says the word "toshiba" and pick up the laptop in the middle of it, it comes out as "toshi-i-i-i-i-i-i-i-i-i-i-ba". This has been tested with the internet streaming audio and audio via youtube an installed demonstration program running.

  * Troubleshooting: *.
  -Since it's a new laptop, I returned to the seller and checked if this happened on the view model in the shop. He did, so this seems to be a general problem.
  -J' searched the forum, support pages, google without result.
  -There seems to be no README / info AVAILABLE included with the latest version of the BIOS / Driver downloads from the Toshiba support site that describes known issues.
  -J' looked for related information from REALTEK (I understand that it is an ALC259-based system) but nothing is there.

  * Suspicions: *.
  I think this may be linked to the protection function of the hard disk (?) +, which is supposed to start when he realizes that the laptop may be declining. Perhaps this can be solved through BIOS or driver updates?
  (I have not tried to disable this feature on the system, or update any components that I wanted to return the unmodified system to ensure the refund. I want to buy this system but will not do without a guaranteed solution.)

  I hope you can help!
  Thank you!

  Hello

  Akuma is right.
  This is related to the installed HARD disk protection software.
  If the laptop would be transferred to fast the HARD disk Protection software blocks the head of the HARD drive in order to avoid that the HARD drive against damage. This leads to delays while writing or reading data from the HARD drive.

  It would be possible to remove the software from the system, but this is not recommended, because the software protects the drive HARD and without this software, you HARD drive may be damaged more quickly.

• Portege S100: How to restore the system TOSHIBA Power Saver setting

  When I had to test my battery and created a new setting of power on my laptop, I accidentally deleted the default schema TOSHIBA Power Saver of my those listed on my utility on Control Panel Power Options.

  I tried to restore the Toshiba utility, by recreating a power scheme called "TOSHIBA Power Saver" - but Power Options says that there is already a framework plan of the same name.

  When I start the laptop, I get an error message saying that the TOSHIBA Power Saver utility has experienced a fatal problem and he has completed the program.

  Can anyone advise me on what I do:

  -restore default TOSHIBA Power Saver setting.
  -stop the runtime error occur
  -put things the way they were back.

  Thank you very much

  Seems so ;(
  I would recommend the recovery CD because the whole procedure takes about 10 minutes only.

  But don't forget to save your data if it's important.

• need inputNumberSpinbox af to automatically restore the max value if the limit superior.

  Hello

  I have an inputNumberSpinbox which has an upper limit as 2147483647. So when I manually enter a value greater than 2147483647, the inputNumberSpinbox needs automatically restore the value 2147483647. I use Jdev 11.1.1.7.  Please let me know haw, this can be achieved.

  Kind regards

  Marie Antoinette

  You can use the technique used below post. Just replace the null with a maximum control and change the value to 0 to null at your maximum range value by default.

  Luc Bors Weblog: ADF 11g inputNumberSpinbox: change when the value is Null

  Thank you

• Need to restore the system disk for Satellite S3000 - X 4

  I ve an old Satellite phone, model type S3000 - X 4, but I ve lost its disk factory settings restoration. I ve loaded another version of Windows XP Home edition, I own but he doesn't he know s a laptop more than the custom of the fresh battery and I m constantly plugged in!

  I ve updated Toshiba, but it remains straight isn t. Is it possible to get a replacement system restore disc for the this model please?

  Hello

  Your ad is quite confused and I do not know is that you have problem with power sypply why you focus on recovery media. If there is a technical problem or if the battery is dead why you think that the recovery CD will help.

  In any case, I think you will not have much chance to get a recovery media for this older model laptop. I checked the download from Toshiba site and there are only 9 different drivers and tools that you can install after the installation of Windows XP Home edition.

  First try to configure Windows XP Home Edition. Later, we can discuss any problem of battery.
  This battery is always the original, I mean one?

• Re: Satellite L300D-242 - multiple problems, usb ports, some keys on the keyboard

  Hello

  I'm having some problems with my computer laptop sateliite, everything worked fine until I changed the operating system from windows vista to windows 7 and now my USB ports arnt working, sometimes they work and sometimes they are not but its never the same one that works he constantly of the changes, also on my keyboard the game Skip, stop, mute buttons have stopped working.

  Can someone help me please?

  Thank you

  Hello

  To get to play, pause and other buttons works, you need to install the VAP (value added package).

  The USB ports are controlled by the chipset, so I recommend you to install the chipset driver to get this resolved.

  I hope this helps a little

• Computer desktop and other windows suddenly too large to fit on the screen. Attempt to restore the system without success. Under XP, chrome on a Toshiba Satellite

  Example: In the task bar, the start icon is off the screen.

  Thanks for your effort. Nothing worked! However, I found that the external monitor that I had attached to my laptop was the problem. I unplugged and the image on the screen of the laptop is back to normal. I appreciate your efforts and the opportunity to explore these issues in non-judgment, inexpensive (free). Kudos to the volunteers. (I never could understand how to upgrade the graphics driver)

  ute124

• Satellite A300 - how to restore the system without data loss partition?

  Hi all

  My Satellite a * 3 partitions hard drive * as in Photo

  In the E: partition it is a hiddn folder named "* hddrecovery * ' with a lot of files and a redame file (.html) warns:
  * "HDD Recovery folder *"
  * WARNING! *
  * Do not remove or edit these files and folders.*
  * Any modification may damage the HARD drive recovery system! "*

  The last time I did system recovery using the 2 DVD (created when you first start), it was also * removed the 'D:' partition with all data files *. I'm very disappointed to lose data :_|
  Suggest me _how to make safe system restore to factory state_ * without affecting the secondary partition and its files *.

  Thank you very much.

  Hello

  AFAIK, restore (F8) image of HDD factory settings will delete all data on the C: drive. Using recovery disks it will delete all data on the local local c and D: (hard disk image file creation). If you have some important data moving to device drives or dvd external usb for all cases. That's all I can suggest

• Satellite A-P50-12PNL - after Win8.1 upgrade cannot create the system image

  After updating my laptop Satellite P50-A-12PNL to Windows 8.1 I can't create an image system (copy). The message:

  +"There is not enough disk space to create the volume shadow copy on the storage location. Ensure that, for the volume to be backup upward, the minimum disk space required for the creation of shadow copies is available. This applies to the backup destination and volume included in the backup. Minimum for Volumes less than 500 MB, the minimum is 50 MB of free space. for voulimes more than 500 MB, the minimum is 320 megabytes of free space. Recommended at least 1 GB of free disk space on each volume if the volume size is larger than 1 GB (0 x 80780119) ' + '.

  I think the problem is the Windows for the systemrecovery reserved surrounding.
  This seems to be too full. 350 MB 349,94 is in use.

  What should I do to get it working again the backup?

  Usually you could solve this problem by extending the partition on the volume where the shadow is being created.

  You can make the disk check and check if the problem persists.
  1) press the Windows key + C to open the bar of charms.
  (2) now, click on settings, then PC settings.
  (3) now, click general, and then click Restart now under Advanced Startup.
  (4) now click on troubleshoot.
  (5) now click on advanced options and select command prompt.
  (6) type Chkdsk /r and press ENTER.

• Satellite A100-811 - sound no longer work after reinstallation of the system

  I recently bought this type of laptop. After about 2 installations of windows from the recovery cd unit... I keep having the same problem:
  I encounter problems or difficulties with some audio applications... especially mp3 running for example in winamp (all versions of winamp). I also tried to reinstall the audio driver to install a newer version... the same problem: I have heard a few small glitches while listening to the song... I should also mention that all this happened independently of the CPU usage... my last solution in my head is to change my antivirus. I use a version of ZONE ALARM antivirus... someone heard something about this antivirus to give the same problems... Thanks for giving me a notice. Thank you

  Hello

  No, I don't think that the noise issue relates to all Anti Viurus applications.
  I read on an audio glitch similar problem on a Satellite P100.
  The BIOS update and an update driver sound has solved these problems

  I put t know if it will help you but you can check for this possibility
  A question: is the laptop uses a Realteck sound card chip?

  If Yes, visit the Web to Realtek website and install the latest driver from this site. Eventually, it helps.