Satellite L300D does not start on battery, adapter needs to start

Similar Questions

• Satellite A110 - does not start

  Satellite A110 does not start on power, but the HD load no start fan display running, but in a few seconds it stops.

  Help, please

  Hi jinskywalker,

  No display?
  No beeping?
  Nothing?

  In this case, you should read this article:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• Satellite C650 does not start with android phone on

  Hello

  I have a smallproblem. My Satellite C650 does not start when my android phone is plugged into the USB port. It sticks to the Toshiba start screen. I checked the boot order and the hard drive is the first on the list, so it isn't that. Any advice will be welcome.

  Thank you very much
  Ian

  Cool. Thanks for the comments.

• Satellite P300 does not start immediately

  Hello

  My Satellite P300 does not start immediately. I have to press the button start ca. 20 or 30 times.

  No results?

  Hello

  I have the Satellite Pro P300 in front of me. I use it almost 4 weeks now and I press the Start button, very gently and keep it down to the second or two and laptop starts fine everytime I want to start it.

  Do not press the button quickly several times but slowly and keep it down for a second or two.

• My Satellite M50 does not start

  Hello

  All of a sudden my M50 does not start!
  He spends nothing; When I press the Start button, it flashes a few seconds and that s all! No noise, no BIOS!

  I already tried with the plug on the battery, but no change at all!

  I found a similar question on the forum, but could not understand what the problem was!

  Help, please

  ML

  Hello

  Have you tried to boot up your laptop by using only the AC adapter? Otherwise, please, remove the battery and plug the AC adapter / CC and try again. Please post what exactly happens when you try to do.

• Satellite A350 does not start

  I have a Toshiba Satellite A350 (about a year and a half) who does not start correctly. This has happened after that the laptop was left on until the battery has failed. The button of the keyboard and the power LED lights up, but the screen stays black when I try to turn it on. I use Windows Vista.

  The machine continues usually to make a sound whirring for a few seconds before it stops making noise (the fan and the HD). The screen flickers sometimes a lighter black on a screen for less than a second. In addition, the cooling fan has sometimes continued to operate after you stop all the rest.

  Another problem is that when if it is turn on and go to the Toshiba screen, odd lines will fade to the screen, and finally the screen eventually white/blue. On the other hand, sometimes it turn on and act as if nothing had happened. In these times, placing sleep mode will be to not be a wheat to turn back on.

  I tried removing the battery, using only the battery, fully charge the battery and using the laptop with barely any load from the battery and it doesn't change anything.

  I would really appreciate any kind of lead as to what may be wrong with the poor.

  Hello

  Generally speaking, it is always difficult to say something on these sometimes mistakes because it s not clear and can be caused by all parties, but at the moment I doubt that this problem is software partner

  You see something on a screen when the internal screen stays black?

  In the worst case, it s that a hardware malfunction and that would mean you need help from an ASP to check what part is affected, but if your laptop is under warranty, the repair is free.

• Re: Satellite A200 does not start

  I have a Toshiba Satellite A200 on VISTA.
  The laptop does not start. I can get to the Toshiba splash screen, but don't go no more far just get the blocking of the laptop and the display one? symbol at the top right of the screen.

  I tried

  -Reset to the factory settings (no difference)
  -Starting with the battery and output (no difference)
  -Withdrawal of the memory modules and try different configurations (no difference)
  -Remove the hard drive (screen displays the details of Intel and say no HD media detected no screen Toshiba either)
  -Pressing the button to try to get in windows safe mode (can t happen).

  Title information, under settings, I see the hard drive and DVD player is connected is connected.

  If anyone has any ideas, please let me know.

  Thanks in advance

  Hi mate

  It seems that you have already tried all possible solution proposals
  But what happens if you start the laptop using a bootable diskette. for example, recovery disk, disk Win XP, Linux live CD, etc?

  I knew it could be a HARD drive problem, even if the HARD drive is correctly detected by the BIOS
  Maybe a replacement HARD drive might help maybe.

  Otherwise, it could be a serious hardware problem I m thinking: motherboard

  What do you think?

• Satellite P20 does not start - BIOS are not displayed

  I have a Satellite P20 and recently it does not start. When I press the power button that disk HARD will light up and it will check the cd-rom drive, but the screen is blank and will not display the bios screen. I can only turn it off by pressing the power button.

  Is it likely to be a hardware problem? I'll try to remove the RTC battery if possible to see if this resets the bios.

  Thank you

  Hello

  Maybe you have a problem with your battery from the Machine.
  Please make a new start without the battery.

  Go that wasn't you maybe has a possibility with a display of extern.

  I hope this is a help.

  By

• Satellite L350D - does not start

  Hello!

  I have a Toshiba Satellite L350D-11 s, but it does not start. Only the power led becomes strangely {color: #ff9900} {color} orange. The lamp with the {color: #00ff00} {color} socket and light with the {color: #ff6600} {color} battery only when the laptop is in charge. The screen remains black when you start. Please help me!

  I would be very grateful if any of you find a solution!  :|
  Thank you in advance!
  Cheers, Felix Uta

  Hi felixutea,

  > The screen remains black when you start.
  And what happens if you connect an external monitor? You can see a picture on this subject?

  In the worst case, it s a hardware malfunction, but you can try this:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If there is a hardware failure, contact the nearest service provider authorized in your country. They can help you to get rid of this. :)

• Satellite 2450 does not start - only in safe mode

  Hello

  I'm having a problem with my Satellite 2450 where it is not initialize properly - is stuck in the screen of Windows XP (just continues to scroll through and hangs there).
  I can boot into safe mode.
  Have not had any other problems with it - no errors, do not have installed/uninstalled anything recently.

  Any ideas what could cause this problem?
  Do you think I should use the recovery disk to reinstall the OS? Anything less drastic I can try?

  any advice appreciated,
  Thanks in advance.

  Hello

  Usually, if the laptop does not start correctly in normal mode, but only in SafeMode because some drivers or / and software applications are false or defective.
  In this case, the recovery procedure should solve this problem.
  If you n t have the Toshiba Recovery CD, you can install from the original CD of Microsoft's operating system, and then you can try to install stuff together from Toshiba (driver, tools)
  These software, you will find on the page of the Toshiba driver.

• Satellite C650 does not start - error PXE - M0F

  Just bought a Satellite C650, get it home and my son decided to stop the whole upward as he ran.

  Now, we get the error below:

  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE ROM
  No boot device - insert boot disk and press any key.

  We received no drives, nor a manual with adequate instructions and can't find anything on the web for help.
  Toshiba closes for the day.

  Hoping that this forum could give me an idea.

  Hello

  PXE error is displayed because the laptop has attempted to boot from LAN.
  Why it does not start from the HARD drive but LAN switches?
  I think the HARD drive is defect.
  Perhaps its also not recognized in BIOS.

  Switch on and press F2. This allows you to access the BIOS where you could check if the HARD drive is recognized. I guess it must be mentioned on the first page.
  If it s not there, then it means that the HARD drive is dead and must be replaced.

  I assume that the warranty is still valid; Therefore, you should get in touch with Toshiba ASP in your country for replacement.

• Satellite M30: Does not start XP

  My Tosh Satellite M30 laptop (with 2 HD discs) does not work after I have updated with the MS security updates, it does not start XP.

  The laptop makes a clicking sound and gives me the message:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Operating system not found.

  I changed the boot order in the BIOS to: CDROM. And select Exit and save changes.
  Inserted my Toshiba Recovery windows XP version that allows me the option of
  "1. the recovery disc" or "2. Expert recovery mode"or also"Exit ".
  I chose "1. Recovery disc"as I'm not an expert (as you can tell!)

  I then get a load of diagnostic checks run by laptop and it shows then finally on the screen:
  X:\\ no disk fixed

  Ideally, I would like to repair and keep things I have on my drive D: HD.

  I'm pretty sure the XP starts on my drive C: HD.

  Your help is very appreciated!

  Suraj

  Hello

  The PXE message means that the device is trying to boot from the network. I put t understand you a lot with C and D HD. I assume you mean that you have two partitions on a single HARD disk. C partition for the operating system and the D partition for your data.

  If I understood you as soon as you cannot boot operating system at all. On this path, it is not easy to say what may be the problem but obviously you a problem with the HARD drive. It is probably defective. If the recovery DVDs is not able to detect one that there may be a serious problem.

  I put t know how contact the partner old Service your unit is but if the warranty is still valid and let check the device.

  Good luck!

• Satellite 2410 does not start

  Hi all
  I have a s S2410-304, which worked properly until today.
  After trying to fix the speaker, I removed all pieces to open Notepad to reach the meachanic parts near the speaker. But I could not remove the upper part of the lower panel and put it all together.
  Eventually the system could not be started! The Green LED for power and the battery is lighting.
  Can anyone help?
  Thank you
  Eckhard

  Hi Eckhard,

  Try diconnecting the specifications of the AC power and remove the battery for a few minutes. Then reconnect the plug AC and try to turn on your laptop.

  If the system still does not start, then there is a problem with your motherboard and you will need to get your laptop repaired by authorized service center.

  Kind regards

• Satellite A30 does not start

  I hope someone could help. My A30 does not start although DC is green and the battery charges (amber). There is no beep or Flash. I removed the battery and tried to start on the current. Did not work. (75% frustration level) Heeeelpppp

  Hi Serkan,

  Do you see the Toshiba "splash" screen when you try to turn on your A30? If this isn't the case, then it is likely that your motherboard has failed, and you will need to refer to an authorized Service partner.

  If you see the 'splash' of Toshiba screen, but your portable computer does not load its operating system, then it is likely that there is a problem with your hard drive.

  Kind regards

• Satellite M100 does not START

  Good, everyone

  I have 100 M Satellite
  _when I turn it on it makes 8 signals and not booting not delivered.
  I can't boot from the BIOS RECOVERY cd too.
  It works but does not start.

  HRR, RAM, all components are ok I checked.
  WHAT signals DOES 8 mean?

  Hello

  What do you mean with 8 signals?
  Sorry, but your statement is fairly general. This type of signals that you noticed?
  Audio (beep) and visual signals (flashing LED)?

  I assume you noticed flashing signals. Am I right about that?