Satellite L300D - new drive HARD and recovery USB loading

Similar Questions

• Satellite A205-replaced drive HARD and recovery CD does not. Media test failure

  Help, please

  My wife's computer crashed, everything has begun with damaged or missing file windows\system32\en. He takes to the geek squad and diagnostic test says corrupted hard disk.
  (Trying to recover the data is another problem to solve later)

  To save money, I ordered a new HDD (WD320GB) installed the new HARD drive, inserted the recovery disc and get the following message:

  Pre-seed execution Environment (PXE) v2.1
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Operating system not found

  I see the new HARD drive in the BIOS, I changed the boot order to boot with CD/DVD player but still the message above.

  What now?
  Thanks for any help I can get.

  Hello

  Can start you on another disk, mate?

  Normally, this message appears if you can boot from the HARD drive or a disk bootable t. In your case, you need to install the OS on CD/DVD first so I think the recovery disc's maybe scratchy or the reader doesn t work properly.

  Then, try another disc and see what happens. :)

• Satellite M70-173 - fatal error - new drive HARD and recovery.

  Excuse my lack of knowledge.

  I received a Satellite M70-173.

  to turn on before charging readings - fatal error; I have to save all my data and replace the hard drive.

  I don't know if it's fixable and that's what I have to do. I also said that when you replace a HARD disk I need a recovery disk.

  I reside in Cyprus and don't have is not easy access to the shops of style PC big supermarket.

  I was wondering if I could use a generic HDD and if so is there a particular one that I need to acquire?

  Also

  where would I go to get a recovery disk?

  I got the laptop I can't afford to buy a new one at the moment and it is still in very good condition apart from the above-mentioned problems!

  I wish that all the advice on what type of HARD drive, I would need or is available - rough cost so I don't get ripped off and if we change the disk HARD is as easy as I read. Also where I should go to get a recovery disc and if that's all I need to fix the laptop.

  Thank you very much in advance for any help I can get.

  Peter

  > The laptop does turn on - is it possible to make a recovery of a damaged laptop disk

  How do you do if you can't turn on the laptop?

  What you could do is to remove the HARD drive, then place it into the drive enclosure HARD 2.5 external, then connect the HARD drive to another computer, to save the data.

  In my opinion this is what you could do

• New drive HARD and OS upgrade on Equium A210

  I want to install a new SATA hard drive more and also upgrade from Vista to Windows 7 is only a problem at all and that I can use a normal Windows 7 disc.

  Hello

  Generally avoid any problem with drive HARD and OS upgrade. If you want to have the exact answer please let us know what model of laptop you have.

• Satellite L655-1GN - failed to install the new drive HARD original recovery image

  Hello

  Just had to buy a new hard drive and put the latter with the former. I already checked that he was the same size and SATA as the original hard drive. When I tried to start a new installation of the operating system from the recovery disk (that I bought the Toshiba provider in my country - MAFIL), the boot option was not available.

  MAFIL representative told me that the recovery disks only for the reinstalliation of the OS on the original drive, but are not suitable to install a fresh copy again. So, how can I install my Win7 64-bit, with all settings on the new drive and Toshiba apps?

  Thank you
  Tomer

  On many models of laptops different change HARD drive or upgrade can be done by the owner of the laptop and after doing this, you can install recovery image using the disc of recovery without any problem.

  I did several times on different models of Toshiba laptops. This works.
  I really don't understand how someone can give you this information.

  By default the BIOS settings, restart your machine and press F12 at startup. When the boot menu appears on the screen put the recovery disk ODD news, select CD/DVD as a boot device and press ENTER.
  What happens when you do this?

• New drive HARD and no operating system on Satellite C660

  Hi guys and girls

  I recently had some problems with my laptop, never resolved so the company that sent it just installed a new hard drive and outside to lose all my stuff that I had not saved, I lost my OS too.

  The company told me that as I bought the phone in Australia, they had no record of recovery for this laptop.
  They then directed me to the toshiba support site that deals with this. So not helping at all really. I need to know how to actually perform the recovery and where I can get the recovery media of!

  What I have to download it on another computer and transfer it?
  Pretty epic question, but I am a student in Holland right now and need of this laptop ASAP!

  Really appreciate any help that can be provided.

  Thank you

  >.. then the company I sent to...
  Did you send your laptop to the Toshiba authorized service provider?

  For a long time, Toshiba offers notebooks without DVD recovery, but with the preinstalled Toshiba Recovery Disk Creator. S manuals document is a detailed how to create this recovery disc. I presume you didn't create this recovery disk, right?

  Now, after Exchange of HARD drive, you can install original recovery image using the installation of Toshiba recovery disc. There's no other way to do it. This is the case if you want to have the factory settings once again.
  Of course, you can install version of the OS, but to do this you need original disk from Microsoft and valid license (product key).

  Return to service. In General, they were right. They can not help you with recovery disk because European companies or providers offer don t taken such supported for laptops not EMEA.
  EMEA is Europe - Middle East - North Africa.

  If possible, install OS using Microsoft Win7 disk. All the drivers, tools and utilities for your Australian model, which you can download from http://www.mytoshiba.com.au/

  If you have any other questions you are welcome.

• Tecra A2 - new drive HARD and have no idea of installing the drivers of Windows XP Home edition

  Hi all, have not been here in a while...

  Where should I start... Have Tecra A2 and the HARD drive died on this issue... was not able to recover whatever it's him so bought a new HARD drive.

  Rather than taking it to a repair shop, I would like to re - install Windows XP myself, save money and have a clean install.

  I know that I have to download the drivers from downloads for Tecra, but haven't a clue as to who and the most appropriate.
  Could someone be so kind and point me in the right direction to get my operating system again?

  Thank you.

  I agree with you. Do clean install of Windows XP Home edition and install all the drivers, Toshiba tools and utilities following this order of installations:

  Windows XP SP2
  Chipsets Intel (r) software installation utility
  Intel (r) 82852/82855 GM/GME Graphics Controller V6.14.10.3722
  TOSHIBA common modules
  TOSHIBA Hotkey Utility for display devices
  SigmaTel Audio WDM Driver
  ALPS Pointing-device Driver
  TOSHIBA-button On / Off Utility
  Launch and TOSHIBA Touch
  TOSHIBA Software Modem SM2138ALD04
  LAN driver
  Atheros wireless network adapter
  TOSHIBA Power Saver
  TOSHIBA utilities
  TOSHIBA console
  TOSHIBA controls
  TOSHIBA ConfigFree
  TOSHIBA PC Diagnostic Tool
  Driver DVD-RAM
  CD/DVD Drive Acoustic Silencer
  View of TOSHIBA for Ext.Monitor service

  I hope that everything will be OK and you will be able to use Windows XP Home on your Tecra again.
  If you have any other questions please let us know.

  Good luck!

• Satellite P20 - formatting drive HARD and the installation of Windows XP Sp2

  Hello world

  Beforehand, I want to thank you for taking the time to help me with my questions.

  Due to system problems I'm trying to re - install Windows XP SP2.

  Based on the installation process, I have two questions:

  1. when I start the PC, the operating system Windows XP installation CD in the CD drive, I am unable to run it directly. Instead the old operating system (which I want to remove) starts. Is there a specific key in the Toshiba P20 notebook that runs the CD automatically? I understand that when the Windows XP installation CD to run it gives me the option to format the HARD drive.

  2. If I want to format the HARD disk directly, what is the best way to do this?

  Once again, thank you very much for the help

  Best regards

  Q.

  Hello

  I assume that you have the original CD of Microsoft Windows XP.
  To install a new OS, you must start on this CD.

  Insert the CD and after laptop starting immediately press the F12 key.
  This will enable the Startup menu, and then you may choose the CD/DVD drive as the boot source.

  As to question 2;
  During the installation of XP Setup will ask you the HARD drive formatting. Simply to choose this option and the HARD drive will be formatted.

  Good bye

• Re: Unfortunate judgment of the m6-1002sa - new drive hard - HP recovery kit - HP Pavilion

  HP Pavilion laptop 1002sa m6

  No. B6H92EA #ABU

  Serial number.      CND8310Q0V

  Recovery HP - suitable for the above computer disks.

  I recently installed a new disk for this computer (approved by the forum) and use of recovery disks to rerurn the computer to its factory condition.

  I have inserted the disc 1 and waited until I got the message 'change disk '.

  I inserted the disc 2, but while he was installing a temporary power AC power interruption occurred causing my computer shut down.

  When feeding returned that I turned on my computer to get an unrecoverable error message shortly after which the computer off again.

  I removed the disc 2 and turned on the computer again to see the message "bootmgr missing - Press Ctrl-Alt-Delete"

  I made this statement only to see the same message.

  Please advise like how to rectify the problem, as I love this computer.

  Concerning

  John Philip

  Hi John,.

  If the recovery procedure has been interrupted, you must start over from the beginning as follows.

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Insert the disc of recovery 1 .  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Then just follow it prompts on the screen.

  Best regards

  DP - K

• New drive HARD and the new operating system

  My old Windows XP, HARD disk crashed and I insert a new HARD drive in my old laptop.

  I want to install Windows 7 on new HARD drive.

  How to prepare the old laptop XP to accept the new Windows 7?

  You will need to do a clean install.

  How to clean install Windows 7 [full Walkthrough]

  See also:

  Installation and reinstallation of Windows - Windows help

• Installed the new drive hard and now I get a pop up that says that my windows is not genuine.

  I upgraded my hard drive on my Dell Inspiron 1750. Now, I get a pop up that says that my windows is not genuine. But under the control of configuration\systeme and Security\System, it says my windows is activated. It is an OEM with Windows7 system House. Did that clone a new (bigger, 1 TB) hard disk and then install. In addition, windows update does not work now either. Said the service is not running.

  You have installed RemoveWAT at some point in the past.

  Now we must try to clear up the mess :(

  Best way to fix it now (since we do not know what version of RemoveWAT served) is to run WATFix...

  Download WATFix - make sure you click the link in the page, not the big shiny buttons! - and use it.

  Then post back with another MGADiag report, and we will see what we can do.

• Pavilion dv6-3100sa: installed the new drive hard and now I need drivers windows 7

  Hi people,

  Can someone point me in the right direction for all the drivers for my laptop. I had to replace the hard drive and I can't get the correct drivers and software on the hp site.

  Windows 10 does not work on this machine because the graphics drivers are not available, so I need to re - install windows 7 original...

  any help is appreciated...

  Stephen

  Hello:

  All the drivers, specifications and manuals are missing from pages support again.

  This happened earlier in the week also.

  Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

  Whether the weekend will not help much either.

• HELP-Compaq Presario CQ70 - new drive hard = Nothing

  Hi all, computer dummy here and I need help.

  the Seagate Momentus 250 gb 5,400 RPM hard drive failed completely on my Compaq Presario CQ70.

  I bought a new Seagate Momentus 500 gb 7,200 RPM.

  I had Windows Vista installed on my laptop.

  but when I'm the new hard drive, I tried to install Windows XP (that I don't have a Vista disc).

  in any case, I inserted the new drive hard and drive XP OS then - NOTHING.

  just black screen and after a while, blue screen saying windows has been closed.

  When I go into the BIOS I do not see the hard drive and everything, but I can run a hard drive test and it passes.

  I have removed and reinserted the hard drive and run the XP OS several times but still the same.

  did anyone can help this old man so I can get my laptop up and working again.

  Recognizing.

  Andrew

  Hello again, Paul and once again thank you.

  I have a Windows Home Premium OEM installation disc.

  I wanted to wait get your response re Home Premium before I considered a set of recovery discs using the info you provided :-)

  I'll try to install Home Premium if that does not work then I get a set of recovery disks.

  Kind regards

  Andrew

• How to replace a new drive hard satellite 1670cds

  How to replace a new drive hard satellite 1670cds
  do I have to remove the keyboard?
  wath is the GB limit

  Hi Theo,.

  HARD drive is mounted on your machine fest, and it is not easy to change. First you have to remove the keyboard, then view and top of page coverage too. If you want to do it yourself, be careful. If you do something wrong, it can be very expensive.

  It is not easy to say which is the limit of the HARD drive, but I'm sure you can use 10 GB with no problems. Try to contact the after-sales Service of Toshiba partner. Perhaps, they can give you specific information.

  Good bye

• I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  Use Time Machine or a clone to copy to the outside.

  Time Machine Basics

  Basics of Time Machine (2)

  Time Machine Basics (video)

  Time Machine FAQ

  First Time Machine backup

  Clone - Carbon Copy clone          (Often recommended because it has more features than others)

  Clone-data backup

  Clone-Deja Vu

  Clone - SuperDuper

  Clone - Synk

  Clone - 6 tested Applications Software

  Time Machine from the Clones and Archives

  Commonly used backup methods