Satellite L305D fails to recover with recovery disks

It gets to the point where I guess it's almost over... It's the first time I had to recover my computer, but I had to replace the hard drive that is entered into the computer once already by Toshiba.

But in the end he comes up with the ERROR: 10-FA12 - 045D I searched this site for the error and nothing found... If someone could suggest something I can do to recover my work laptop it would be much appreciated...

I also already wiped all of the computer the first time it is come with this error and then retried the recovery disks.

I never heard of this error too.
When you get this error exactly?

If you don't l t have this error before, your new HARD drive could be faulty. By controlling the Hitachi Drive Fitness Test
http://www.HitachiGST.com/HDD/support/download.htm#DFT

Tags: Toshiba

Similar Questions

  • Satellite U400 - failed to create the recovery disk - bad DVD player?

    Hi all

    I have a 13 inch Satellite U400.
    Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.

    The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).

    My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
    I noticed, that error code changes, but I don't know how to get the recovery disk creator will.

    What can I do? Change something in the registry?
    I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.

    So, if someone nows how to work at least one of the problems, please give me advice.

    Thanks in advance,

    wiglip

    Hello

    Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).

    And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!

    Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
    (1) run Regedit (start-> Run-> Regedit)
    2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
    (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
    (4) restart.

    Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724

    Good luck! :)

  • Satellite C650 - failed to create the recovery disk - error 020150-20-00000000 code

    I hope this is the right place to post this, but I think I have the same problem with my Satellite C650. He keeps wasting DVDs by stopping and saying that it cannot read the file E:\ZZlmg\11544XSP.swm and gives an error code 020150-20-00000000. The file is located on the DVD. I use Verbatim DVD - R The Recovery Media Creator is trying to write the first disc and is at the point of check data. Can you think of another explanation for this error other than the cheap DVD option? Thank you

    Hello

    There are two explanations;
    Either the CD/DVD drive firmware is not up to date and contains no information about the drives used discs (CD or DVD) is not fully compatible.
    As you know this is happening and is not uncommon.

    So first check if a firmware update is available for your CD/DVD drive.
    The European driver of Toshiba page is the right place to look for that.
    More details you will find in detail if the firmware has been published for your ODD.

    If there is no update firmware of your CD/DVD drive, then you should test other discs

  • Recover the system with recovery disks

    I have a Pavilion Elite desktop computer. I tried to reset/recover my system with the recovery disks that I created when I bought the system. But I get the following messeage: "system recovery disks do not support this computer. You cannot restore this system with these discs. "GOOD, then I thought that my disks must be bad and ordered a set of HP. I come from them and tried again to restore my system... EVEN COMING? What's wrong? Need help.

    The recovery disk problems Troubleshooter need effects?

    There is another thing that you could do that provide the Windows key is always visible on your COA sticker.  Since it was a multi-configurable system you should know it was professional, Home Premium or ultimate edition. Please be aware that what I propose will not contain the goodies HP provided with recovery disks, you will need to reinstall all your programs and data.

    Go to this site and download the version of Windows 7 ISO which matches what you had initially and have your key ready.

    http://www.heidoc.NET/Joomla/technology-science/Microsoft/14-Windows-7-direct-download-links

    Once downloaded the file ISO, you can burn on a DVD using the Windows 7 DVD drive or another DVD burner you have:

    http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

    See also this site for more information:

    http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    Once downloaded and burned to DVD, use it to try to install Windows 7 on your computer.

  • Satellite L550D-13V - how to recover without recovery disks?

    Hello

    I had a big problem. Win 7 Home Premium 64 BIT crashed on my satellite L550D-13V.

    I tried to fix it, but it does not work. So I decided to recover via HARD disk utility.
    Everything seems to be okay, but ultimately the tool said that errors have occurred. I tried to get it back again, but the process aborted with blue screen "PAGE_FAULT_IN_NONPAGED_AREA" this time.

    After reboot system told me that no bootmgr is available. I tried to start using the recovery disk, but it also seems to be defective because the system cannot boot from the disks.

    And there is my problem. I cannot start / retrieve now. Volume D seems to be OK - the HARD disk utility files are still available, but I can't create a new recovery disks and it is not possible to start in disk utility.

    You have any ideas?

    Thanks in advance and best regards
    Danny

    Hello

    The story is strange
    I m wondering why you are not able to boot from the recovery disc?
    Have you used the recovery disk created in the past or have you tried this drive for the first time?

    However, with regard to the error message: PAGE_FAULT_IN_NONPAGED_AREA
    I googled for that and it sounds like it could be linked to the fault memory.
    Perhaps one of the failures modules.

    Of course, this is just a personal opinion

    If a HARD drive folder is available on your HARD drive, then there is a small chance of getting the recovery of HARD drive to work. Here's an interesting thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40790

  • Failed to retrieve the Satellite Pro L300 laptop using Toshiba Recovery Disk

    I have a Satellite Pro L300 Vista I'm trying recover using the recovery disk Toshiba official that the machine is not able to retrieve from the hard drive.

    The process gets as much as to start recovery utility and asking to select the language in the utility recovery which I emphasize English and then select next; It moves on the next screen, which is empty and then it just hangs.

    Any suggestions?

    You bought your laptop with the Vista version English?
    What language is marked before selecting English?

  • Satellite L50-A-161 - recovery media fails in the creat recovery disk

    Hello.
    I just buy a new Satellite L50-A-161 with 6 GB of Ram.
    When I try to create the recovery disks (3 4.7 Gb DVD) with support of recovery, during the check, after writing the first disc, I get this error message:

    Cannot read the file:
    D: \EFI-microsoft \boot \bcd
    (error code: 02014F - 20-00000000)

    and the process stops.

    Is there anyone thath can help me?

    Here are the specs of my notobook:
    Satelliete L50-A-161, 6 GB Ram, Intel Core I7 3630QM-2, 40GHz, NVIDIA GEFORCE GT740M 2 GB of RAM, L.O. W8 64bits.
    Ask for more, so needs.

    Thank you

    Hmmmm... There must be a problem with the recovery image.
    When you open retrieve creator of disc and if there is option for creating USB media please test.

    Maybe you'll be able to create the USB stick recovery.

  • How Formatt Satellite A200 with recovery disk

    People...

    I need help.

    I currently own a Satellite A200 and I contain the recovery disc. I have 2 hard drives, 1 with vista, 1 with all the stuff not install as a music. I want to formatt the discs with the recovery disk. I formatted the C drive with vista before, but I don't remember how once again.

    I booted up the laptop with the recovery disk, eventually the mode of repair of the system... but what's the next step? I have to formatt and get the stuff to fabric settings.

    Please help me

    When you use recovery disk for the installation of operating system of the first HARD drive will be formatted completely. This means that all partitions and data will be gone. Second HARD drive can be formatted in Vista.

    So now install new OS by using recovery image.
    Start your laptop and press F12 will be bootable devices
    Place the recovery media in the optical disc drive
    In the list, select CD/DVD and press ENTER
    Follow the menu on the screen (for the most part, you must press button NEXT)

    When the facilities of the OS is finished and you can start Vista, type Windows Explorer (combination WIN + e. click with the right button of the mouse on the second HARD drive and select Format...

    All that s!

  • How to recover the Satellite L30-140 - I lost the recovery disk

    Hello

    I have a Satellite L30-140 and I want to recover the windows on that.
    I lost the dvd recovery-. -.
    Is there a method to recover? as acers Alt + f10 recover menu?

    Thanks for your help :)

    Hello

    You need the recovery disc, either the clean Microsoft Windows disk in order to install the operating system gain.
    L30 being a little older, I doubt that you can order the recovery disk
    That's why you need a Microsoft Windows CD!
    You will need to buy this CD if you are not the owner of the Microsoft Windows CD.

    Welcome them

  • Windows 7 recovery failed with recovery disks

    I have a 5380qd All in One Omni 200 old 2 years with windows 7 home premium, I7 CPU 2.9 ghz, 8 GB of RAM. The problem started when I noticed that my fan was all the time. So, I cleaned the vents and such fan indicated in the How To section. This has not solved the problem. Soon there after, I received a form of high utilization of the processor Norton error. I opened the task manager a saw that my cpu was fortification to 100% every 10 seconds or more. The next day, I turned on my computer with a blue screen which introduced this error: 0xe0ef000

    From there I put my repair disc then shut down the computer then restarted and to perform diagnostics and noticed that he was trying to repair my D: drive which is my recovery partition. No there is not an otion availble so he can fix my C: drive, but he said 'not able to repair, call the HP technical support'. However, I was able to get my OS to perform more troubleshooting.

    So I consulted the Action Center to realize that there are more errors

    Problem event name: BlueScreen

    OS version: 6.1.7601.2.1.0.768.3

    Find the ID: 1033

    BCCODE: a

    BCP1: 0000000000000000

    BCP2: 0000000000000002

    BCP3: 0000000000000000

    BCP4: FFFFF80002C98CD4

    OS version: 6_1_7601

    Service Pack: 1_0

    Product: 768_1

    I ran the CD of diagnosis of Vision that I created when I first bought the computer and all tests except for the Blue Ray writing test only because I had not a RADIUS blue to write in.

    Therefore, I have concluded that the POST works very well and all the activities before are very well until the operating system loads. I then used the comand of msconfig to disable all the services initially upwards and always had the 100% cpu problem. Then ran the provided AV startup disk from the MS site and found no virus. Also ran my Norton who has not found a virus. So I decided I would make a recovery of the system with 3 recovery disks. At halfway through the second drive, I got an error 0xe0ef000, "Windows recovery has no" contact Support. Now, I have no OS, because it has been formatted for the first part of the resumed. Then, please?

    0xe0ef000

    Hello

    Assuming that it's just a problem with the recovery media, here's another solution, you can try.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create an installation of Windows 7 retail disc yourself using another PC - just download the good Disk Image ( that must be the same version of Windows that was originally supplied with your PC ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • Err2Err3 error after recovering Vista with recovery disk.

    Looking for help please.

    I have a laptop hp DV2410us. My hard drive of 160 GB is just came out, so I put a 320 GB drive at 7200 RPM and 2 new cards memory sticks for a total of 2 GB. The same memory type more then it came with. I ordered the hp recovery disk. everything seems to load ok, but it keeps restarting after it enters windows and all programs has finished start up. As norton and windows sidebar. There is a small popped up tht box for perhaps a second down on the menu bar tht has been one of the downloaders of system files. Its called fbi Director of mistletoe, I think tht was the name. I tried to click on it until windows stops and looks like it is trying to pull up a screen but closes and the system stops.

    I'll check back every hour approximately. And let me know if you need more information about the system.

    Update: I have advanced and tried to reinstall vista with the recovery disk. It's always the same thing with restarts it. But now it came with a black screen with the word err2err3 on the upper left of the screen. I even restarted the thing several times and tried to use f11.

    Could I have to change something on the new hard drive?

    Help, please...

    Looking for help please.

    I have a laptop hp DV2410us. My hard drive of 160 GB is just came out, so I put a 320 GB drive at 7200 RPM and 2 new cards memory sticks for a total of 2 GB. The same memory type more then it came with. I ordered the hp recovery disk. everything seems to load ok, but it keeps restarting after it enters windows and all programs has finished start up. As norton and windows sidebar. There is a small popped up tht box for perhaps a second down on the menu bar tht has been one of the downloaders of system files. Its called fbi Director of mistletoe, I think tht was the name. I tried to click on it until windows stops and looks like it is trying to pull up a screen but closes and the system stops.

    I'll check back every hour approximately. And let me know if you need more information about the system.

    Update: I have advanced and tried to reinstall vista with the recovery disk. It's always the same thing with restarts it. But now it came with a black screen with the word err2err3 on the upper left of the screen. I even restarted the thing several times and tried to use f11.

    Could I have to change something on the new hard drive?

    Help, please...

    Hey IBdarts

    problem with the hp recovery process, you will need to contact hp direct

    It's their recovery process not microsofts

    I suggest that you tell them that you have installed a replacement hard drive that you have bought yourself

    http://welcome.HP.com/country/us/en/contact_us.html

    Walter, the time zone traveller

  • Impossible to restore or recover a Pavillion dm4 with recovery disks.

    I did a complete diagnosis of the hardware test and all the tests.

    I can't access the recovery via the main menu, since I get a BSOD.

    I ordered HP recovery disks and received them yesterday.   Tried to install unsuccessful recovery disks.

    I called iguru in India and they crossed me to see if I could get these discs to work.  No luck.  At every turn, I keep getting the BSOD.  They referred me to the HP support.

    Support HP told me wish either the warranty (warranty expired a month ago) or send it inside for repairs at $250-300.  I don't have that kind of money laying around.

    Question: Is there something I'm missing?

    Pavilion dm4

    Model # dm4-1065dx

    Windows 7 64-bit operating system.

    Hello

    I would try completely wipe the hard drive first and then reinstalling the operating system.

    Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

    http://Software.LSoft.net/KillDiskSuiteFree-Setup.exe

    Download and install ImgBurn on the link below.

    http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

    Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

    During the following process do not worry about all warnings as your recovery DVDs will reformat the HARD drive.

    Insert this CD into your PC which is unable to load the operating system properly. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

    A brief description of the process here is Killdisk.

    Use it to wipe the entire hard disk, highlight (80 h) and press f10 (you will also find Hague to enter a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

    When the process is complete, remove the CD from Killdisk, insert your first HP recovery disk and then hold the power button until the laptop turns off then restart the laptop to try the installation again.

    Kind regards

    DP - K

  • Satellite L500-12F - error creating Toshiba Recovery disk

    Hello. New user on the forum and the new owner of a Toshiba.

    I am trying to create the 4 recovery disc for my Toshiba satellite L500-12th. Disks 1, 2 & 4 created with success, but 3 disk failed twice. The message I received was on the screen: cannot read the following file: F:backslash ZZImg backslash 09753xsp6.swm error Code: 020150-20-00000000
    (I can't type a backslash in this window of the computer)

    Anyone know of a solution or a similar problem?

    Dwight

    Hi Dwight,.

    The disks that you use to create the Toshiba Recovery disk?

    I have a good experience with Verbatim DVD-R. Have you tried these discs?

  • Satellite M300 - how to use the recovery disk creator?

    Satellite M300

    How to use Recovery Disc Creator and what is the main function of Recovery Disc Creator?

    Hello

    I guess you didn't read the manual again because it explains quite well what is the recovery disk creator.

    However, this tool creates the Toshiba restore disk. This disc contains a picture of the factory settings. This means that the Windows operating system that is pre-installed with all the drivers and tools of Toshiba. It of easy to use (just boot from the disc), simply follow the instructions on the screen.

    For example, if you install another Windows or Windows peut t start you can use this disk to recover a system that works.

  • Satellite P200-RT2 - need help with recovery

    I made a Boo-Boo and need advice/help to get things fixed.

    My husband has a Satellite P200-RT2 running Win XP 32 bit (included with Vista, but had been upgraded). The battery needs to be replaced, does not load and he made the mistake to disconnect while it was closing, but had not closed completely. Laptop computer would not start even in Safe Mode.

    So, I thought to try to insert a disc Win XP Pro thought, he would work to restart the computer and start again. No, he took over and completely restructured the laptop. If great, now have Win XP Pro on it, but can not load all Toshiba drivers that I downloaded from the Toshiba site.

    I was not in a position to know if there is a specific order to load the drivers... have been reading and wonder if the BIOS should be the first?

    Needless to say that the Toshiba recovery software went on the P200-RT2, I can't find a separate drive that supposedly it contains, there are only two listed drives, drive C and D (for DVDs).

    Toshiba tells me that Microsoft sells the recovery software, MS told me that Toshiba sells. There are sites online that have the recovery disc for Vista I could buy or download, but I'm not sure on those that are reliable/safe.

    Have to mention that I have a Toshiba laptop latest (L675 - 40 X, Win 7) and have the recovery disc for it.

    Is it possible to use these recovery disks for Toshiba software loaded on the old P200-RT2?

    Any help is greatly appreciated!

    If I could get the XPPro to work, which would leave as OS... but I don't know where to find the drivers.

    Satellite P200 - RT2 PSPB0C is a Canadian model.
    But the same model was released in Europe under the model number:E PSPB0

    You will find all of the Win XP drivers on the Toshiba UE driver page:
    http://www.Toshiba.EU/innovation/Dow...ivers_bios.jsp

    Choose:

    • Archives
    • Satellite
    • Satellite P series
    • Satellite P200 PSPB0
    • PSPB0E
    • Win XP

Maybe you are looking for

  • How do you "nuke" (reset globally) all permits in Yosemite?

    Since I updated to Yosemite last year on my MacPro Hexacore 2010 tour, my permissions were a mess. Regardless of all my attempts to fix the permissions, or give anyone and everyone permissions to any drive or folder, I still can't write, record or tr

  • How to set the new tab to open my home page?

    If I press on a new tab, it opens a selection of windows of recently viewed things, while I want to repeated just as my search page.

  • Windows cannot start. Need help

    Hi, I have a problem and I hope someone can help me out. My laptop (satellite) could not suddenly start, saying that the following file is missing or corrupt: "windows\system32\config\system.You can try to repair this file by starting windows setup u

  • I forgot my windows password for my mini hp 100

    Help, please! Try to use my computer hp mini 100 after 4 years and don't remember my password. Even the hint is without help. Help, please. Thank you

  • File object property will not write as digital 0 in TS 4.1.1

    Hey everybody, So, I came across a weird problem and I was wondering if it was a 'feature', or if I'm missing something. Basically when I write a digital 0 to a file property object, using the Write method of the API, it doesn't seem to be written.