Satellite L305D-S5895 - keys to functions and the wifi does not work with Win XP

Similar Questions

• Satellite W30T-A378 from - touch pad and the keyboard does not work

  I have a problem with my laptop, the touch pad and the keyboard does not work.
  Can someone help me what is the possible cause?

  Thanks in advance.

  Hello

  I guess you checked if the Tablet has been properly connected to the docking keyboard.

  Have you tried to unplug and plug the docking again?
  Note: there is a latch on the left you have to move and in order to remove the tablet.

  Perhaps there is a connection problem.

• just has got rid of the virus and responsible for all the disks but given the wifi does not work

  WiFi doesn't work do not

  just has got rid of the virus and responsible for all the disks but given the wifi does not work

  Hello

  Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
  for problems known.

  Actually, try updating your driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• Internet and the sound does not work after uninstalling programs, System Restore also not work.

  I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.

  I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  Copy the contents of the cd in a desktop directory.  install from this directory.

  or

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6,7. 5.7.1|  4.4 | 3.6
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  Visit the HP website and look.

• If I start Photoshop I get 3 error messages: 1. FastCore-Routinen-Modul 2. MMXCore-Routinen-Modul 3. Mehrprozessorunterstutzungs-Modul could not be loaded because the tool does not work with this version of Photoshop.

  FastCore-Routinen-Modul could not be loaded because the tools does not work with this version of Photoshop.

  The MMXCore Routinen module could not be loaded because the tool does not work with this version of Photoshop.

  The Mehrprozessorunterstutzungs module could not be loaded because the tool does not work with this version of Photoshop.

  Hi zimlo,

  Please check the below link which may help you:

  https://helpx.Adobe.com/Photoshop/KB/error-could-load-fastcore-multiprocessor.html

  Concerning

  Sarika

• using firefox 24, yahoo toolbar disappears and the keyboard does not work on some websites

  We have installed firefox 24, yahoo toolbar sometimes disappears. On some web site when trying to enter a password, the keyboard does not work until you double click of the mouse on the registration form. This on two different systems of windows 7. Each thin seemed to work fine before the update prior to the installation of 24.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  I hope this helps!

  Curtis

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• I updated my Apple ID, but only old man keeps coming up when I try and make updates, and my password does not work with the old id.  Can anyone help?

  I updated my Apple ID, but only old man always appears when I try to update my password does not work with the old id.  Can anyone help?

  You can try to log in to your old account and then sign in with the ID again.  Your applications will be always related to the original account - you must use the old account to update.

• Autorun does not work WinXP home. I insert a cd and the autorun does not work.

  I have tried everything I can find on solving this.   When I insert a music cd, it is used to bring up a box that I wanted to use it as a player, etc.   Now it's just sitting there and when I right click on a song to play windows media is not even an option to use.
  I hope it's make sense.  Basically the autorun does not work for anything.
  I've seen references to the registry, but I tried everything.

  Try to use the Autoplay Repair Wizard

• I put a new ink jet cartridge in the printer and the printer does not work although it is switched on

  Cartridge replacement installed on a lexmark 730 printer inkjet series all the cables and connections ok but the printer does not work

  Hello

  as the poblem started when you changed the ink cartridge contact Lexmark

  http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_AU

• C1765 done yellow toner a printer roller noise rattling and the printer does not work

  Hear a clicking noise when printing.  Replaced the yellow toner and the rattling is still strong and the printer will not work.  The noise and the vibration felt on the new toner only occurs with the yellow toner.  What is happening, is the printer goes wrong.  "low density, yellow to replace the cartridge, printer restart" I just put in a new cartridge.

  Hello David,.

  Please post on the forum. According to the information you provided, it looks like you have a mechanical failure within the printer itself. This device is more compact and carriers Dell limited parts, the best option at this stage would be to replace the printer. It is the course of action we would take if the product is under warranty.

  Kind regards
  Joseph E

  #iworkfordell