Satellite L305D-S5934 Pro - keyboard will not perform a double click

Similar Questions

• Programs will not open by double clicking to open it.

  I have windows 7 running on 2 PCs and recentley by double clicking on a program at startup, it does not open (it is show in the Manager of tasks such as running) happens on the two computer randomly and for third-party programs, and Ms Word. The main program, on what happens is MapInfo. Please help as there are computers to work and start generating serious problems.

  Hello

  Try this link: http://www.youtube.com/watch?v=pf8q1m45_ic...Ihope hope this helps!

• Satellite L305D-S5934 does not start - white screen

  I have a problem with a 2 years satellite l305d-s5934.

  In turning on, the power light turns on, but the hard drive light does not work and the screen remains blank.
  I tried removing the battery and reboot without it after pressing the power button, but nothing changes.

  Any advice on fixing the problem would be welcome.

  Thank you

  Hello

  Remove the battery, disconnect the power adapter and leave the laptop disconnected for a longer period of time. After that connect the two parties can try unit lights up once more

  If it does not, check the RAM. Remove the single module and test two slots with each module.
  Sure, it might be possible that the two modules are faulty and that the procedure could not help you.

  In the worst case the motherboard may be affected in one such case that mobo replacement would be useful.

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Satellite L305D-S5934 - after installation of XP that nothing works

  Recently I got an error with my Satellite L305D-S5934, it was Vista. It would be not only wouldn't boot so I had to install Windows XP, but now, nothing works.

  Is there something I can do to get the graphic video back to normal and the wifi and all that was at the factory on the laptop?

  Hi drftking23,

  > but now nothing works.
  Wow, very detailed! : D

  In any case, I think the problem is that you need drivers for your hardware to WLAN, LAN and all other devices don't work.
  Anything you need you can download on Toshiba U.S. page where you can find your laptop model:
  http://www.CSD.Toshiba.com

  But let me give you a little advice: simply use the Toshiba recovery disc where all the drivers and tools are preinstalled. This disc contains a ready image of factory with all the drivers and tools, it s pretested and configured by Toshiba.
  Maybe it s an option ;)

• Satellite L305D-S5934 - after the stop, the light is always on

  I just bought a Toshiba Satellite L305D-S5934 two weeks ago.

  Here lately, I can't seem to stop completely. I select the closing down in the start menu. It seems closed down (the screen becomes black) but the power light is still, and I can hear noises inside as if it was still running.

  I am running Windows Vista.

  Hello

  This question seems always? I mean is it a permanent status that your laptop won't turn on properly? Or is it that sometimes?

  To my knowledge the Vista default action for the power in the Start Menu button is sleep. If your laptop does not but would go in the mode 'sleep'.
  You can change it as described here:
  http://www.howtogeek.com/HOWTO/Windows-Vista/change-the-Windows-Vista-power-buttons-to-shut-down/

  In addition, you should check if your BIOS is up to date.
  Choose your model of laptop (it seems like an American series) and download the compatible BIOS.

  Check it!

• I can't access my iMac, is locked and the keyboard will not connect. Magic mouse works OK. What should I do?

  Hello, how can I access my iMac that is locked and the keyboard will not match (new batteries and LED is blinckin). The Magic Mouse works OK. What should I do?

  Buy or borrow a USB keyboard and connect you with that. Once logged in go to your bluetooth preferences and pair it with the keyboard.

• My macbook pro battery will not hold a charge

  My macbook pro battery will not hold a charge. I took in an Apple reseller and claimed him install a new battery. He said that my battery was still good. I asked him to install a new battery just to have a brand new machine. With the new battery installed, the computer still will not hold a charge for very long. I got the Apple dealer and he ran several tests without conclusive results. I always have a laptop that will not hold a charge and must be connected to use for any period of time. Can anyone offer a solution? Thank you.

  Try a reset of the SCM.  System sometimes forget the management of his own material. Reset the management system (SCM) controller on your Mac - Apple Support

• Apple wireless keyboard will not connect to mac mini

  Apple aluminum wireless keyboard will not connect to mac mini. He worked the other day and when you press the power button gives me a green light for a few seconds. I removed from my bluetooth devices and removed the batteries which did nothing. It will not go into the mode of discovery, but he recognizes the keyboard and fails to connect.

  So much for some reason any it plugged into my macbook of brothers.

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• File Manager XP PRO SP3 will not recognize USB floppy A: drive

  File Manager XP PRO SP3 will not recognize USB floppy A: drive

  The system tray alerts "new hardware found" and "installed".

  In the system. material | Device Manager | floppy drives, the disk is present, activated and works

  If I pay BACK the drive is located and can be read and written.

  The drive is not the case in (windows explorerer file manager.

  The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.

  In the removable storage service is started.

  If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.

  This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.

  Any ideas?

  It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.

• Microsoft wireless keyboard will not type the letter 'c' or type the number "3".

  My wireless keyboard will not let me type the let type me the letter 'c' or type the number "3". This works sometimes! Help please!

  This is a Microsoft wireless keyboard 3000 v2.0. It came with a mouse aswell which is working as expected.

  Any ideas? It's so frustrating!

  If you can, try the keyboard on another PC and try a different keyboard on your PC. If the keyboard has the same thing on another PC and another keyboard works well on your PC, it is "side on" hardware failure. Assuming that it is hardware failure, if it is under warranty GET it replaced, it is not you will have to buy a new one.

  Please mark this as useful or response if applicable.

  Tricky

• HP Officejet Pro 8500 will not send or receive faxes

  HP Officejet Pro 8500 will not send or receive faxes. 'Run Test Fax' indicates that everything passes.

  Then see HP support pages for your model, its their equipment & the fax is independent of the victory