Satellite L310-D4011: how to reset the DVD region to 0 setting?

Dear all,

I have a Satellite L310 D4011 I bought recently in which I installed a DVD playback software.
I run Windows XP. One of my friends played a video clip of the United Kingdom (Mccartney Live at red square) in the DVD player and the original region setting that was 0 with 5 remaining changes, went to 4 changes remaining and the area is now set to 2. I am in India where the region for DVD is 5. If I change to 5, I lose another change option.

I don't want to leave my DVD ROM stuck 0 left options and some other areas.

Can someone give me advice to reset the region back with five remaining options - as it was when I bought the laptop?
I'll be very grateful. The salesperson who I bought the laptop will be able to get back to factory setting?

Best wishes

Hello

I think Toshiba has nothing to do with it. To protect the film industry and interests all laptop manufacturers offer optical disk drives where you can watch movies with country code but only 5 times. The last chosen region code will be set as default. So if you have more than 4 codes there is no reason to panic. Just continue to watch movies in your favorite area.

I'm 100% sure that Toshiba service or the vendor where you bought your laptop will say that they have nothing to do with it. In drive properties you have set out to clear how it works.

In any case, you can try to contact them and ask for help.

Tags: Toshiba

Similar Questions

  • Satellite 5105-S607 - how to reset the BIOS password

    I have a Toshiba laptop Satellite 5105-S607 part no PS510U-00NU7X and I lost the password.
    I tried to reset the Bios by disconnecting the battery BIOS and various methods seen on the website, but nothing
    works.

    The methods apply to other models, but this one seems to be missing, can you help me to have to spend a lot of money is not worth the price of the laptop.

    Thank you in advance.

    + You must return the unit to an authorized dealer of Toshiba or Toshiba authorized provider that will remove the password as a service paying +.

    [How to remove BIOS password? | http://APS2.Toshiba-tro.de/KB0/TSB4600PR000JR01.htm]

  • Satellite Pro 4260: How to remove the DVD drive?

    I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
    Does anyone know how? Is there a manual with available how?

    Thank you

    Hello

    This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
    Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
    Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
    Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM drive

    Well, I think that it of not easy for a person without experience.
    So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;)

  • Satellite U500-12J - how to remove the DVD slot?

    I put a small DVD into the slot for DVDs.

    Currently the work of trifles: the dvd is lost into the slot, it can not be read and cannot be deleted.
    IST is possible to easily remove the whole out the small dvd dvd player?
    I'm knacked!

    I hope someone is able to help me!
    Ruby

    What Satellite you do you have?

  • Satellite A100-906 - how to reset the Bios password?

    I got a Toshiba A100-906 2 years when I was on vacation in another country.
    It has a Bios password and I can't funniest t change it.

    I read all the manuals and there is no default password.
    Is there a way to reset it or at least a program that will allow me to change with my fingerprint reader?

    > More funny it has a Bios password and I can't change.
    For me it is not funny but he s strange because the BIOS password is not set on any one of the new laptops the point is that the BIOS password cannot be disabled or removed without knowing the old password.
    So, you won't be able to remove it without the help of ASP from Toshiba.

    Technician Toshiba ASP can only remove this password and you should get in touch with the guys to solve your problem.

    Welcome them

  • Satellite A10 S103 - how to reset the Bios password

    Hello world

    I have an old Toshiba Satellite A10-S103 (model No. PSA10E - 00KWY - GK) and I forgot my bios password and I am trying to reset it by finding the jumper cmos on the motherboard (FHZSY1), but there is nowhere the J1 or pins to reset my cmos.

    Please help me

    [How do I remove a BIOS password if I forgot it? | http://APS2.Toshiba-tro.de/KB0/FAQ35002I000IR01.htm]

    + You can not remove a BIOS password yourself, if you forgot it. +

    + The laptop must be returned to an authorized dealer of Toshiba or Toshiba authorized provider that will remove the password as a service charge. +

  • How to reset the Media center in North America to play a dvd?

    I changed it once to read a dvd, and now I can't find the right place to change it back

    I changed it once to read a dvd, and now I can't find the right place to change it back

    =====================================
    For DVD region code can be changed on your
    optical drive but there is a limit of 5 changes can
    It remains on the last selection. If you want to try to change
    region code... See the info pasted at the end of this
    Message.

    It is possible that one of the media following freeware
    the players would play your drive without changing the
    area code.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player (32-bit)
    http://www.filehippo.com/download_vlc_32/
    (works on XP/Vista/7)
    (the name of the file to download is: vlc - 2.0.3 - win32.exe)

    VLC Media Player (64-bit)
    http://www.filehippo.com/download_vlc_64/
    (the name of the file to download is: vlc - 2.0.2 - win64.exe)

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Media Player Classic Home Cinema
    http://www.videohelp.com/tools/Media-Player-Classic-home-cinema
    (works on XP/Vista/7)  (The name of the file to download is:)
    "mplayerc_homecinema.1.6.3.5818.x86.exe")
    (start with left click - Download (direct link)

    ======================================
    Windows 7 - How to change the DVD region Code

    Posted February 17, 2010 in the answers Forum
    By: Aziz Nadeem - Microsoft Support
    ======================================

    You can follow the steps mentioned below:

    1. click on start, type devmgmt.msc and press on enter

    2. expand DVD internal and made Manager right click
    on the sub point and click Properties, and then click
    The DVD region.

    3. DVD region, select a geographic area and
    Click Ok

    Note: You can change the DVD region settings
    maximum 5 times.

  • Re: How to reset the password on the logon screen - Satellite A300?

    How to reset the password on the logon screen?

    I can not access the installation of the establishment or BIOS because I can't pass this screen. Enter something wrong 3 times turns off the computer. I do not have the current password and I don't know what kind of password is and why it s asking one as soon as I turn it on.

    How can I solve this problem?

    You can not fix it. You can only disable it, but to do this, correct password must be known to you.
    As many times before in this forum we have already discussed on this topic.

    Password is very important security feature and we cannot advise how to bypass or remove passwords on the public forum. In other words, each stolen notebook protected by password will be easy to start and access to the recorded data will be easy.

    What is your laptop? You may have purchased this used an and now it is blocked by password?

  • How to replace the DVD drive on a series of Satellite?

    Could someone give me instructions how to replace the DVD drive?
    I unscrewed a few screws in back and two under keyboard and I still can't get out.
    Any suggestions?

    Thank you
    Select this option.

    I found it!

    It's the single screw! It is under the flap of the memory.

  • How to reset the forgotten administrator password

    How to reset the forgotten administrator password

    You forgot your password

    Lion or later version

    Reset a password in Mac OS X 10.7 Lion

    OS X Lion mountain - reset a login password,

    OS X Mavericks-solve password problems,.

    OS X Lion-Apple ID can be used to reset your password for the user account.

    For Snow Leopard and earlier with installer DVD

    Mac OS X 10.6 - If you forgot your administrator password.

    OS X - change or reset a password for account (Snow Leopard or earlier version).

    For Snow Leopard and previous without installer DVD

    How to reset your Mac OS X password without an installation disk. MacYourself

    Reset password for OS X without an OS X CD - Tech News and Analysis

    How to create a new account administrator - Mac Hack

  • Satellite A110-260 - how to remove the BIOS password

    Hello

    I have a password for the Toshiba Satellite A110-260, but I can't reset the password of the battery

    Please help me!

    How to reset the bios password

    You cannot remove the BIOS password. Something like that is not possible on Toshiba laptops.
    A special procedure is required and this can be done ONLY by a (certified partner) ASP.

    So my advice is to contact the ASP in your country and ask for help!

  • My windows administrator password has been changed. How to reset the password?

    My windows administrator password has been changed. How to reset the password?

    Here you go:
    1. Set your BIOS so that it uses the DVD drive as its primary boot device.
    2. Start the computer with your Windows 7 repair CD.
    3. Press a key when prompted to boot from the DVD.
    4. Select 'PC Repair' in the menu.
    5. Select 'Repair' when prompted.
    6. When you are prompted, select System Restore.
    7. Configure Windows to a point before someone changed your password.
    8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.
  • How to reset the lost password admin

    How to reset the password for the admin on my mac?

    Restart your mac and hold ⌘R immediately. Keep until the Apple Logo appears. This may take some time for your mac start. Once this is the case, select Terminal in utilities > Terminal to the Menu bar above. Once the terminal appears, type

    ResetPassword

    A password reset Wizard will appear. Select the appropriate account, and enter the new password. Then tap Save. Then, click the apple logo in the corner, and tap on choose Startup disk. Click on Macintosh HD and press ENTER.

    You should now be able to use your new admin password.

    Good luck.

  • Satellite Pro 4200 how to avoid the mistakes of the ACPI

    Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
    The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
    Piotr Plecke

    Hello
    in this case it would be interesting what Type of laptop it is exactly.

    You will find this model on the bottom of your laptop. There is a review of it.

    Some models have a Bios update available, others not, for example.

    Please send additional information!

    Good bye

  • I'm locked out of my new iPad and I don't own a computer. How to reset the password

    IM locked out of my new iPad. How to reset the password with a computer?

    You do not have. You must either find a friend or a member of the family with a computer, you can use or make an appointment at the Genius Bar at your local Apple store.

Maybe you are looking for

  • Adjustment of curve with 2 independent variables

    Hi all I want to be able to solve the viscosity of a liquid at a given pressure and temperature.  What I have are two tables 1 d for pressure and temperature, and then I have a 2D (20 x 200) of the values of viscosity table.  In the 2D table rows rep

  • Age of empires II: age of Kings and age of empires II 'winners' works is not on vista. Tried to run in compatibility mode!

    I tried to run in compatibility mode, but it still doesn't work. He moved very well, and I tried to reinstall several times. whenever I go to play, it says that it has stopped working and windows tells me when they find a solution. Help, please I rea

  • user deleted automatically when you start weblogic Server

    HelloI created a user in weblogic by following the steps below: 1. clicked on realams of this security on the left side. 2. click on myrealam 3. Click users and groups of 4. clicked new 5. Password and username providedThe user is created successfull

  • reactivate the cs3

    After that installation of Windows 10 Photoshop CS3 wants to reactivate, but can not find the Internet.  Adobe web site says that I can not activate offline (by phone)This screenshot is the message of the failure of the online activation:This screens

  • Unable to download a copy of Photoshop CS5

    Im trying to download a copy of Photoshop CS5 on my laptop (I already have it on my desk) but Adobe download mean - 'Install' is corrupted and cannot be opened. You must eject the disk image. -When I try to download it. Any help is greatly appreciate