Satellite L35-S1054: Error: 10E7160001 when recovering

During the recovery, I get "" error: 10E7160001 "." He gets as much as 90 percent of the disk two and then stops and gives the message that an error has occurred. It has a button 'ok' to stop.

If you reboot, you get a blue screen and then it restarts. It's a phone of friends and he brought to me. It's a laptop Satellite L35-S1054.

Thanks for your time!

Mike

Hello Mike

Enter the BIOS and you'll find the option set to default settings. After this try to reuse the recovery CD. I can't imagine that there is a problem with the recovery image. If the installation of recovery stops abruptly, it can also be because of the defective HARD drive, maybe some bad sectors.

Tags: Toshiba

Similar Questions

  • NTLDR error on Satellite L35-S1054 lack

    I was with my recovery cd and applications to restore my laptop to the orginal way he was, and my child cancelled my recovery and now when I try to boot my laptop it tell me that NTLDR is missing, CTRL/ALT/DEL to restart.

    When I restart it, the same message appears.
    Can someone tell me what I need to do to fix this problem. My laptop is a Satellite L35-S1054.

    Any help will be greatly appreciated.

    Hello

    It seems to be something wrong with the files on your system disk HARD or with the HARD drive itself.
    I have read different statements about this error and to be honest that the installation of new OS could contribute to.

    If you n t have the recovery CD, you can use an original Windows installation CD, and then you could install the Toshiba drivers downloaded from the driver page.

    Good luck and feedback would be appreciated

    Good bye

  • Satellite L35-S1054: can not get the Atheros 802 .11B/G to work

    I can't get the internal WIFI to work! I wiped the day the first HARD drive and reinstalled a fresh XP Pro SP2. I manually installed all drivers except toshiba machine has not properly categorized them. Does anyone have a link for the real for L35-S1054 Atheros wifi driver?

    Also, how to turn on the radio for him once it is properly installed? I see a Fn F8 button that looks like the radio, but it does nothing. Do I need a hotkey program to do this work?

    Help!

    And thank you!

    Hello

    The discussion is a little confuse
    Have you checked the Device Manager and checked her if the Wlan card driver has been correctly installed? Check it out.

    But back to the root. The device seems to be a mobile American. I put t know if the American notebooks come with drivers CD or not, but normally you should have the drivers on the support. If this isn't the case, then the image of Toshiba contains options for creating a CD of drivers and tools clean.

    The laptop with Atheros Wlan card supports also an Atheros Wlan client utility.
    This sets up the WiFi connection. You have 2 options. You will use the clean Windows configuration or you will disable her and use Atheros client utility.

    But in a first time, you must activate the Wlan with the switch on the side of the laptop and the Fn + F8 key combination

  • Satellite Pro L300D-20R: displays error 0xc000000f when recovered

    Hello

    I wonder if someone can help me. There are accidents of software in my laptop. I tried to restore my laptop to factory setting, but failed.

    Here's what I did: under the opening of proceedings (F12) to drive recovery HARD, I entered "repair your computer" and then computer show the error 0xc000000f. It came at the very end when I 'C' boot from CD/DVD with windows Vista recovery.

    Any help appreciated,
    Thanks in advance,

    Adam

    Hello

    As far as I know, you have to press F8 to start the HARD drive recovery process.
    Then a new menu will appear where you can choose repair my computer.
    Then, you choose the HARD drive recovery.

    If this is not possible, that it would mean that there is something wrong with the HARD drive or the partition that contains the files / image of HARD drive recovery.
    This might explain why the boot from the CD/DVD drive is not possible.

    Conversely a failure of RAM could be the reason too.
    That's why it of needed to check if these parts.

    By the way; are you able to boot from an another disc bootable Win XP or Linux live CD?

  • Satellite P300-1CN - error message when download of MSN messenger

    I recently updated my Satellite P300 - 1CN PSPCCE to Windows 7, after this everything seems to work ok but if I try to download msn messenger is comes up with an error saying the file may be corrupted hr: 0x8007000d.

    I am not the most technical of the world, but would like to know what I need to do on this issue!

    Help please!

    Hi Brian,.

    I think that it of really difficult to tell why you get an error when you download MSN messenger.
    Where do you download the Messenger? You should try MSN or Microsoft page.

    This will happen if you click on download or start the downloaded file?

    Have you noticed this behavior with other downloads too?

  • Satellite Pro L - error message when I try to play a music CD

    When I try to play a music CD I get this error message >

    + "The version of this file is not comparable with the version of Windows you are using. Check +.
    + system information from your computer to see if you need a x 86 (32 bit) or x 64 (64 bit) +.
    (+ version of the program and then contact the software publisher.) » +

    He plays on my old XP 32 bit office but will not play on computer laptop 64 bit Windows 7.
    The CD is not a commercial manufacturing, but it is important for me.

    Any ideas please?

    Pete

    Hey,.

    Try your hand at playing the CD with Windows Media Player or player exactly?

    You can try to play with VLC media player. It s my favorite player because he plays all audio and video files and it s freeware :)

  • Satellite Pro M300 - error 2131 when burning CD - r in itunes

    Hi all

    I know that this question of error msg is very old, but I can't seem to solve the problem.
    I can't burn CD - Rs in itunes, it comes up with * error 2131 * which is apparently an error number that is very well known.

    I downloaded RegCure to fix, but because it is a work laptop I can change the registry, because I don't have the admin rights.
    I can burn CD - RW using iTunes, but they do not work in my car CD player.

    I understand that it is a firmware issue and nothing to do with itunes.

    Please help me

    See you soon,.
    Scott

    Hello!

    You're right, it's a firmware issue. In the knowledge base of Toshiba I found this document about the error 2131:
    http://APS2.toshiba-tro.de/KB0/TSB84026P0000R01.htm

    I think that the Satellite M300 is not a European model, it s an American model. So the site search Toshiba for a update of the firmware:
    http://www.CSD.Toshiba.com

    Good bye

  • Re: Satellite A300-211 - error message when installation of VAP

    Hi, I just did a clean install of Vista Ultimate (R) x 32 on my A300-211 and when I get to the installation of VAP this well known error message appears. I have not found an elegant solution to this subject. Any thoughts on fixing it? (clean install, x 86, VAP 1.1.19 x 32 etc.)

    My best regards and thanks in advance. I found several solutions here in the past, you are doing a great job.
    Aggelos

    Thanks for the comments, buddy!

    It is perhaps useful to other users here s. :)

  • Satellite T110-11U - error message when starting computer

    I have a 6 month old Satellte T110-11U running only a manufacturer installed OS - Windows 7. Whenever I start the computer, I get an error message:
    There is a problem of starting, C:\ users\home\AppData\local\imagusud.dll, the specified module could not be found. Can ignore the prompt, I would like to do the sorting.

    Someone knows how to fix this?

    Hello

    It seems that something is corrupted in your user account.
    Have you tried to repair the operating system or to clean the registry with CCleaner?

    CCleaner is a free tool that cleans up the registry and removes the garbage in the HARD drive.
    Try this.

    Otherwise, you can check the msconfig-> Startup tab.
    You should look for some entries containing the imagusud.dll file and may disable or remove this

    Good luck

  • Satellite M100 gives me error TFncKy when I turn it on

    I have problem with my laptop M100 with shortcut keys.
    It gives me error TFncKy when I turn it on. I did a restore point before I install internet explorer 7 and the problem wasn't there after I installed it, it appeared, it must relate I narrowed down it that much.

    I've got RegCure which is recommended for this kind of problem and it does not work once I've done so many scan. I will not buy another Remover spyware, unless I'm absolutely sure, he will do the job that they want us to pay each one individually.

    If I need to uninstall and reinstall the program, I need to be guided through it, because I did a search in the recovery cd and I can't find the exe program to reinstall

    Sincerely,
    Linda B

    Hello

    I know which is really annoying to you, but I recommend you do the following:

    Back up all your data and recover your computer because you will spend just a few unnecessary time and nerves to find out what the real problem is.
    After retrieving your machine, you should do your updates as usual and set whenever you install new software, a new restore point (as you already :)), then it would be easier for you to find the malicious software that causes this error.

    Maybe you shouldn´t install the IE7, better grab a copy of Mozilla Firefox because they don t cause so many problems with the operating system and other software on your hard drive. (I read today on "plugged in" firefox has been download 400,000 times and I think that 400,000 downloads won´t lie..)  ;))

    Would appreciate comments on your part.

    See you soon

  • Satellite L35 (US) with Atheros AR5005G wireless connection problems

    I have a Toshiba L35 (Windows Media Center Operating System) with the software WiFi Atheros AR5005G. This machine was purchased in the United States.

    While in the United States the Wi - FI connection to a router (Linksys) using Windows to configure was instant without any problem.

    I am now in England and when I try to connect to a Modem/Router (3 com), use Windows to configure, connection is spasmodic with what makes a connection on every five attempts. Several times I have to use the repair connection device trying to connect. When it connects the connection is good. When you use the repair it shows unable to renew your IP address if it connects. On other occasions, I use the network connection Panel and 'disable' then 'activate' then most guarantees a connection.

    The laptop provides instant connection when you use a card PCMCIA WiFi with Windows to configure. While the card is inserted the s computer WiFi connect instant however when the card is removed and the computer restarted the same problems occur for a computer, free WiFi!

    Other laptops have no problems to connect to my Modem/Router. I am convinced that it is working properly.

    All regional/language settings in the control panel have been updated with the United Kingdom.

    No undates are available for the Atheros Driver or BIOS.

    Anyone can help identify the problem/possible settings to change?

    Hello

    Satellite L35 is a portable American designed for the American market. BIOS and drivers should be downloaded from the Toshiba site we and not on Toshiba Europe site.

    However, the error message Impossible to renew your IP address is known to me and my brother had the same problem with the Intel card. I just updated the WLan driver and used the Intel Proset utility for WLan configuration.

    I see that you have the Atheros card. The Atheros also provide an Atheros WLan client utility. Try to use instead of the clean Windows configuration.
    In addition, place check WLan card properties. You will find energy saving option. Please turn it off and check the Advanced tab

  • Satellite L650-1PE - error in Toshiba bulletin board messages

    I received error messages when I try to use Toshiba bulletin board, so first I got error 3 and then I press ok and I got error 23 which I do not know why? Also, my laptop Satellite L650-1PE.

    Also, I uninstalled and reinstall the latest version again, but I got the same error messages. Please can someone help me with this.

    Thanks in advance.

    Hello

    What error messages you get exactly? Maybe you can post a screenshot of these messages.

    What operating system you are using?
    You use the preinstalled version of Windows 7 in Toshiba or another version?

  • Error message when you try to use Toshiba Disc Creator

    I recently upgraded to Vista SP1 SP2 and now I get an error message when I try to use Toshiba Disc Creator 2.0.1.3. "An unexpected error has occurred. Error code 32007C-26-00000001 "it worked perfectly before.

    This is the first time that I used it since the update so I think that SP2 may be part of the problem, but I'm not sure. I could not find updates for TDC. My system is a Satellite L305-S5919 with Vista 32 bit.
    Someone has an idea of what could be the cause of this error?
    Thank you

    Have you tried to roll back the OS in time and checking the previous features once again, just to be sure, it has something to do with the installation of SP2?

    I put t know if anyone here can offer a solution but I m quite pessimistic in this topic and don t think that Toshiba provide new version.
    AFAIK Toshiba disc creator is always available with single and also downloadable image recovery application.

  • Satellite L35 memory installation question

    I'm upgraded memory in my laptop of buddies, but for all intensive purposes, it will be here on out considered a mine.

    The toshiba satellite L35 originally supplied with 1 x 512 MB of RAM, 6 months, I have improved, putting 1x1gb stick in and keeping the 512 to so (it has worked well for all the time I got it). I decided to upgrade again and bought 1x2gb stick.

    When I put in, I put 2 GB key on the slot 0 (correct me if this is the wrong term for the slot in the bottom when the laptop upside down) and the stick of 1 GB in slot 1.
    When I started the computer should only 1.87 for the RAM, then it should be a little less than 3 years.
    I tried all the combinations involving the stick 2 GB
    2 GB to location 0, 1 GB in slot 1
    2 GB in location 1, 1 GB in slot 0
    2 GB at location 0, 512 MB at 1 location
    2 GB in slot 1, 512 MB at location 0

    For all this he appears as 1.87, no matter where the 2 GB is and what else is there with her.

    the 512 MB (original computer) is hynix 512 MB 2Rx16 PC2-4200
    the 1 GB (updated 6 months ago) is kingston KVR667D1S0/1 GR
    2 GB (brand new) is DDRII533 G.Skill PC2-4200 (F2-4200CL4S-2GBSQ)

    I am gets mixed responses from crucial.com and memoryx.net all this notebook can handle.
    So my question, I guess... I have to send the G.Skill back and get a different 2 GB? What is the compatibility issue?
    Should I get a kingston? Or I just do something wrong.

    Thank you guys and thanks for the forum in general, I looked here for instructions on how to install memory in a laptop, I've only done so far, desktop computers so I was puzzled and didn't break anything.

    Hello

    The L35 unknown for me. It seems to be a series of laptop designed for the American market.
    But the L30 is known to me and I know the L30 is very similar to the L35.

    However, the point is that the RAM can be upgraded only up to 2GB.
    This means that you can use a 1 GB module in a slot.
    A upper memory module size is not supported by the memory locations and therefore the laptop shows about 1.87 GB RAM.

    Hope this helps to explain the problem.

    Best regards

  • Code error 1603 when you install Microsoft 3500 wireless mouse

    Display in the name of the customer

    Code error 1603 when you install Microsoft 3500 wireless mouse

    Using toshiba satellite A - 75 Widows XP - based customer ID

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://support.Microsoft.com/kb/953691

    Check if that helps.

Maybe you are looking for