Satellite L350-141 works with 4 GB of RAM?

I want to improve my Satellite L350 up to 4 GB of RAM. BIOS accept 4096 MB.
But I can't install an operating system (xp prof. or 32-bit vista)
My L350 boot from CD DVD, but if the installation program does not start I have a reboot.

My question is: will my Satellite L350-141 work with 4 GB of RAM?


I think that he should t be a problem with the 4 GB of RAM.

But as you probably n t known, Microsoft Windows 32 bit OS cannot use the full 4 GB of RAM due to the limitation of the 32-bit operating system.
Microsoft has published several articles and documents concerning the issue of RAM of 4 GB.
If you want you can google for this question.

Fact is that only Windows OS 64 bit (XP or Vista) would be able to use the full 4 GB of RAM.

The BIOS and Chipset also support 4 GB of RAM to make sure that the laptop and windows would be able to use the full memory.

Best regards

Tags: Toshiba

Similar Questions

  • Satellite L350 - Vista shows only 2 GB of RAM, but I have 4 GB installed

    I installed 2 two modules expansion memory of 2 GB each to my satellite L350 that works on Windows Vista Premium.
    I bought at Toshiba UK who confirmed that they were the correct modules.

    The System Control Panel icon always indicates RAM 2 GB (not 4GB) memory.
    If I remove one module 2 GB, the system icon of 2 GB (which is correct) said Control Panel.
    I have re-installed the two modules and changed their round in the slots, but the system icon still says 2 GB.


    You have 32 bit or 64 bit Vista?
    First Vista 32-bit is not able to handle 4 GB of RAM. 32 bit OS have a limit, and they can only use about 3 GB of RAM.
    Here is some practical information:

    You have installed Service Pack 1 for Vista?
    How much RAM does the BIOS?

    Welcome them

  • Is - this windows 7 works with SDRAM and DDR Rams (1)?

    Original title: RAM for win7


    Did windows 7 works with SDRAM and DDR Rams (1)? !!!

    Yes, Windows 7 works with this type of memory RAM. Windows 7 requires a minimum of 1 GB of RAM, which is more important.

    System requirements:

    * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
    * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
    * 16 GB of disk space available (32-bit) or 20 GB (64-bit)
    * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

    Also run the Windows 7 Upgrade Advisor:

  • Satellite L350-214 - error with the software Reeltime


    I have a Satellite L350-214 with Windows 7 Pro and have encountered an error with the software Reeltime, I uninstalled and reinstalled and still get the error below. Any help or assistance would be great

    Tony Miller

    Log name: Application
    Source: Windows Error Reporting
    Date: 2010-11-30 12:27:58
    Event ID: 1001
    Task category: no
    Level: Information
    Keywords: Classic
    User: n/a
    Computer: Tony-TOSH
    Fault bucket 1223018385, type 5
    Event name: CLR20r3
    Answer: No available
    Cabin ID: 0
    Signature of the problem:
    P1: tosreeltime.exe
    P3: 4a769d0e
    P4: WindowsBase
    P6: 4b5950b7
    P7: a86
    P8: 18
    P9: System.InvalidOperationException
    Attached files:
    C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
    These files are available here:
    C:\Users\Tony\AppData\Local\Microsoft\Windows\WER\ ReportArchive\AppCrash_tosreeltime.exe_25c5a6496c7 ad44943ce88637e3389e8a80bd45_07f0c745
    Symbol of the analysis:
    Recheck for solution: 0
    Report ID: d5b71327-fc74-11df-a596-00266c333aed
    State: 0
    The event XML:

    0 x 80000000000000


    Not available

    C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml

    C:\Users\Tony\AppData\Local\Microsoft\Window s\WER\ReportArchive\AppCrash_tosreeltime.exe_25c5a 6496c7ad44943ce88637e3389e8a80bd45_07f0c745


    My system specs


    If you get this error Reeltime, you should try Ccleaner. There may be a registry problem and CCleaner might solve this problem. This great freeware and easy tool which you can download here:

    Check this box!

  • Satellite A660 works with 2 GB of RAM only

    Please help me that my laptop is psaw3ew Satellite A660 was works well when it was the supply with 6 GB of ram and I convey ram to won 8 and it works well until it stop start and then I remove the Ram and now, it's works that with 2 gaeremynck Ram please help me


    Sophie Saddekni

    To be honest I n know how to help. What happens when you experiment with strips of origin that you got with your laptop?
    Any amount of RAM is recognized in the BIOS?

  • Equium M50-164 would not work with 2 GB of Ram

    If someone has successfully run this laptop with 2 GB of ram.
    It will take 1.5 GB without problem, but if I replace the original card of 512 MB with a 1 GB laptop does not work.

    Have now updated the bios ok, but still no joy
    can someone help please...


    The M50 can be upgraded to 2 GB! It's a good and two 1 GB memory modules should work!
    Did you use the same memory modules?
    I found the 1024 MB PC2700 (PA3313U-2M1G) modules on the Toshiba site options & accessories.
    In my opinion, you should try this module.

    A lot of modules without a name is not 100% compatible and the quality is poor. I use the modules of Kingston and I m very happy. To my knowledge Toshiba portable computers are delivered either with memory modules Toshiba or Kingston.

    Good luck

  • Toshiba Controll buttons do not work on Satellite L350 - 107 PSLD0E with Vista

    Hello everyone! {: 8}
    I have the Satellite L300: x

    My problem is not key + work + multifunctional. :-( A single. It is a key of "turn off / on" sound.
    It started after reinstalling my Windows Vista operating system. : 0

    What can I do? I need in there!
    Thank you.


    You have a Toshiba Vista preinstalled OS or have you changed something?

  • Cannot get my Satellite Pro to work with internet access wireless

    I have a Satellite Pro L20 - who has wireless network adapter. Bought a BT Voyager 2110 Wireless ADSL router. Connected to my broadband router. Used Toshiba config to find router on my laptop - it looks like I have then drag the icon of the laptop to the router but it says I can't do because the router is used by another owner?
    Should I do anyting - Inter adapter card in my laptop says activated - the router is connected - but nothing works.
    Please help but I'm pretty useless on these things so keep it clear
    Thank you


    Is this the result even when you use the settings Windows wireless?

  • Satellite A300 HDD work with the PS3

    My cell phone charger does not work and I want to improve my ps3.
    The fact of the hd in the work of the a300 with ps3. If so how I get out?
    Cheers, Matty


    PS3 uses HARD drive 2.5 SATA.
    I've also got PS3 and updated the 500 GB HARD drive.
    I used a SATA 2.5 HARD drive with 5400 RPM

    I guess the A300 uses SATA HDD too but I'm not sure about the speed

    So generally you can use this disk in the PS3

  • Satellite U200-141: problem with drivers after installing Vista

    Hi all

    I just installed Windows Vista, and I'm having some problems:

    1. shortcut keys do not work (Fn + F1, f2, f3, etc does not at all).

    2 Touchpad - I have already installed driver listed it under Vista, but although I can use the touchpad, normally when you point, rattling, etc., I can't scroll. I mean, I can't set up the scroll area (it has been the right corner to scroll vertically and bottom to scroll horizontally). I checked the options of auto-scroll on IE and Firefox, and it does not work here.

    3. I don't seem to be able to install the new BIOS.

    4. the internet, play, pause, stop, etc., (embedded) buttons do not work either.

    5. I have the product recovery CD but this is for Windows XP and I don't know how to install the drivers to go from there.

    I'd appreciate any help anyone could provide.
    Thank you.

    You cannot use the notebook unique features because you have not installed the drivers VISTA required.
    And you can not install Vista drivers Vista drivers are not available at this time

    So what to do? Either you use the Vista without the additional features like buttons etc. or you use the supplied recovery CD and install XP

  • Satellite L300 - 16L - BSOD with new modules of RAM


    I have a Satellite L300 - 16L and make me the same problem.

    Has got 2 x 1 GB DIMMS standard and ordered 2 new 2 GB DIMMS. If I put the 2 new 2 GB DIMMS in I get the BSOD, Memtest also crashes as soon as it starts to test. If I place a 1 GB Dimm in the lower slot and a 2 GB in another windows starts fine, if I try to put the 2 in the lower slot and 1 GB in the higher the BSOD that he.

    But if I put either of 2 GB on the lower slot his own windows boots fine, mem test has also allows to test the two GBs 2 individually and said no problem.

    Any ideas anyone? My laptop is supposed to support 4 GB, I'm sure of it.

    Thank you

    Hi Jack_Jumpin,

    > My laptop is supposed to support 4 GB, I'm sure of it.
    Why you are sure that your laptop supports 4 GB of RAM?

    I checked the specification of your laptop on the Toshiba page and this L300 - 16L supports only 2 GB. This means that you can only use two modules including 1 GB of capacity.

    Sorry, mate, but you can use t 4 GB. The chipset supports only 2 GB.

  • Satellite A660 - 11 M: does not start with 8 GB of RAM, but works with 6 GB

    Satellite A660 - 11 M:

    I upgraded my RAM to 4 GB (2x2gb) up to 8 GB (2x4gb). When I start the computer I can see in the BIOS it reads 8 GB of RAM. However, when starting, it does not go beyond the white screen BACK (just before Windows starts).

    If I delete one of the 4 GB & replace it with a 2 GB (so I have 6 GB total) it starts ok.

    Anyone know how I can get it to work with 8 GB of RAM?


    To be honest, I've never heard of RAM SanMax modules...
    In my opinion the problem is related to your RAM modules is not compatible to your laptop or defective.

    You can test it with high-quality Kingston or prétestées authorized service modules?

  • Satellite L350-24U: Windows Vista crashes after installing SP2


    I own a Satellite L350-24U laptop with Windows Vista 32. I bought in October and had to reinstal the OS twice now. Still, it crashes after installation of Service Pack 2. After you restart the system, a blue screen appears, giving the following information

    STOP: 0 X 00000024 (0 X 00190444, 0X86B9BAD0, 0XC0000102, 0X00000000)

    I had to reinstall Win Vista with HDD Recovery from Toshiba (press F8, then repair etc.) and everything worked properly again.
    THS time, it's more serious. Last night the system shut down whenever you use internet explore (after about 30 seconds). SP2 has not been installed, but there are so many problems, I decided to install SP2, because I hoped that the bugs I had with SP2 would be eliminated. When installing SP2, the system crashed again, and now I got the same bluescreenmessage new.

    I tried to reinstall Vista, but the Toshiba HDD program starts no more: it is said: the installed program is not working (or something similar) - please click on ok to close.

    I did not burn the cd of recovery yet, so I don't know what more can be done and online support is closed today.
    I'd really be very happy for any help
    Thank you


    I searched a bit on the Microsoft Web site and on the blue screen, I created this article:

    So I think that the reason for the BSOD is a corrupted file system or a defective HARD drive. You should check the drive using the Drive Fitness Test for example.

    I put t understand why you didn't burn the disc of recovery yet. Why you didn t read the manual at first?
    Now, you have only one option to get a new recovery disk: Please order a new Toshiba directly:

  • Satellite L350 lost office when made from recovery disc

    Satellite L350, computer worked great until I decided to back up the system of recovery Toshiba on DVD discs. White continuous screen, turned off and not protection could not return my desk top icons... nothing... might not even stop computer.
    Then. After making myself offline, I made a full start up which worked. Went back online and found my McAfee was disabled himself, was not protected... reinstalled it... all seems well now.

    BUT! the? is 'what went wrong? " Summer reading the user manual... afraid that I shouldn't have been online to copy backups?

    >... I decided to back up the system of recovery Toshiba on DVD discs
    Can you please tell me how you did that?

  • Satellite L50 - A - 16 G - how to upgrade RAM?

    I have a Satellite L50 a 16G with 4 GB of RAM and I would like to move to 8 GB, but I don't know what memories are compatible with my PC.
    I tried to present that the serial number on the Support from Toshiba page but tells me that is not valid, as the Auto Detect tool is unable to detect my device and if I get the model in the list is not?
    How can I get information on my PC?

    According to specification for laptop, your laptop can be upgraded up to 16 GB. Modules memory compatible RAM for your laptop are:

    4 GB DDR3-1600-PA5037U-1M4G
    8 GB DDR3-1600-PA5037U-1M8G

    In the lower corner of your laptop, you will find the cover of RAM. Remove it and you will have full access to the RAM slots.

    Do you know how to remove/make up RAM modules?

Maybe you are looking for

  • How to rename a tab

    Windows allows me to rename a tab by right click and properties.How to rename a tab in FF?

  • Qosmio F50-126 - stop HDD & Fans power safe mode

    I don't know, but in power safe mode, my drive hard punishment stops turning also my fan stop barely running... Something wrong?

  • How can I connect my MG3520 wireless without the disc?

    I lost my installation disk when I moved. I have a Windows 8.1 without a hard drive anyway, I want to connect my computer and my wireless printer. I can't understand how to do this without the disc.

  • Cannot use my pda webmail

    When I go to my webmail using my mobile pda, I am able to get on the site and see the mail files, but when I click on one of the emails, I am sent to the username / password page.  makes use of cookies, which ARE allowed in my settings.  also mention

  • Help with WAG160N

    Hello I use my first as a WAN Port LAN port.  The IP address I get from my isp provider is a public IP address.  I have a number of features, including a printer that connect via wifi. All of these devices also seem to get a public IP...  How can I c