Satellite L350 - 16L system restarts when you run with power cord plugged

Similar Questions

• Satellite A500 - game starts only when you run fraps

  Hello

  I have a Toshiba Satelite A500 with an i5, nvidia GT330M with 4 GB of RAM card, I only use drivers for toshiba and in dead rising 2 there are some significant slowdowns tried

  Patches as rename the dead rising2.exe etc., it did not work, I play my resolution 1366 x 768 and with shadows and zombies at the top with 16 AF, leaving the vertical sync, sampling and blur to the broad, the game is full of similar slowdowns trolling (character begins to run slowly).
  More funny thing is that when I recorded with fraps (lock the framerate on) I can play smoothly with no slowdowns at all, I even tested and set of 4 complete (AA) and turned on the vertical sync and the game was playable with no slowdowns on very large crowds of zombies, when I play normally without stil fraps recording, when the game slows down Press f9 for fraps to start recording and the game starts immediately

  Race "smooth", fraps makes very large files and in a short time it would fill my drive, the program limits setting I tried but delays were still present:-no opinion on this subject or

  possible correction for the game?

  Hi fiurion,

  Very strange what s... To be honest I never heard tell that it is only possible to start the game when you run fraps...

  You have installed an antivirus or firewall program that could block the start of the game?

  Also I recommend that you install the latest version of DirectX and display driver.

• "System.UnauthorizedAccessException" when you run Optika Vision Lite

  I installed optika vision lite software on my computer windows 7 and when I clicked on options to change the language from Spanish to English, he brought this error, please help me I need to use the software as soon as possible

  Thank you

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.UnauthorizedAccessException: Access to the path "C:\Program Files\Optika\Optika Vision Lite 2.0\temporaryini.ini" is denied.
  at Microsoft.VisualBasic.FileSystem.FileOpen (Int32 FileNumber, String FileName, OpenMode Mode, OpenAccess, OpenShare, Int32 RecordLength share access)
  at Optika_Vision_Lite.IniFileHandling.WriteProfileString (String FName, String s, String key, String replacement)
  at Optika_Vision_Lite.LanguageDialog.OK_Button_Click (Object sender, EventArgs e)
  at System.Windows.Forms.Control.OnClick (EventArgs e)
  at System.Windows.Forms.Button.OnClick (EventArgs e)
  at System.Windows.Forms.Button.OnMouseUp (MouseEventArgs mevent)
  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.ButtonBase.WndProc (Message & m)
  at System.Windows.Forms.Button.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5477 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
  ----------------------------------------
  Optika Vision Lite
  Assembly version: 2.0.0.0
  Win32 version: 2.0.0.0
  Code: file:///C:/Program%20Files/Optika/Optika%20Vision%20Lite%202.0/Optika%20Vision%20Lite.exe
  ----------------------------------------
  Microsoft.VisualBasic
  Assembly version: 8.0.0.0
  Win32 Version: 8.0.50727.5420 (Win7SP1.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5468 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System.Runtime.Remoting
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5483 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
  ----------------------------------------
  Interop.LMDSKernelLib2
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Program%20Files/Optika/Optika%20Vision%20Lite%202.0/Interop.LMDSKernelLib2.DLL
  ----------------------------------------
  AxInterop.LTMMLib
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Program%20Files/Optika/Optika%20Vision%20Lite%202.0/AxInterop.LTMMLib.DLL
  ----------------------------------------
  Interop.LTMMLib
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Program%20Files/Optika/Optika%20Vision%20Lite%202.0/Interop.LTMMLib.DLL
  ----------------------------------------
  Accessibility
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
  Code: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Original title: Hello, I need urgent help on this

  Moved from the community involvement Center

  Hello

  Since Optika Vision Lite is a third-party software

  http://optika-vision-Lite.software.informer.com/

  You're more likely to find useful information to

  http://answers.informer.com/search?q=Otika+vision+Lite

  or the forums

  http://software.informer.com/Forum/

  Don

• Tecra M4: System hangs when you run a package of modeling

  My Tecra M4 2 GB memmory crashes when executing a package of modeling. The package works on all other machines to date.
  Hard reset is necessary. It is a task by the intensive computation — could it have something to do with the power to save options?

  Also, it crashes when saving using a packard bell store and save the external drive.

  Hello

  Very interesting question, but you haven't written what saving settings you use. The processing speed of the CPU is set to the maximum level?

• System crash when you run Mcafee

  McAfee Scan freezes at C:\Program Files\...\Mpeg_Engine\ASH264Enc.dll

  Screen of the blackout, blue, general drama. Computer says 'one of your disks should be checked for consistency. Dell said they find no hardware problem in their analysis. McAfee said that there is a windows problem.

  Help!

  Hi, I had a similar problem with MBAM and someone recommended to mehttp://www.resplendence.com/whocrashed

  He informed me that he wqs indeed one out of the pilot, I dated and had no problems since.

  Just re-run your Mcafee scan and after it blue screens, start up run this tool and it will let you know what little devil is causing your aggravation. Hope you find it useful to thius.

  Driver can be a fickle bunch.

  Select this option.

  Windows Vista (the best), home premium.

• Runtime for atibtmon.exe error when you disconnect the power cord

  Whenever I disconnect my power cord Windows 8 displays an error dialog box:

  Runtime error!
  Program: C:\WINDOWS\system32\atibtmon.exe
  This application has requested the execution to terminate in an unusual way.
  For more information, contact the application support team.
  Anyone with the same problem?
  Any fix for this?
  Computer: DELL Studio XPS 16

  I encountered this problem with my Pavilion DV6 after upgrade to W8 64 bit as well and is more annoying than it should be.  For what it's worth, I opened the AMD Vision Engine Control Center and disabled the "Vari-Bright" option on the power tab and which seemed difficult to get the error message every time my laptop is unplugged.  Does not solve the underlying problem and will decrease my time unplugged a bit, but I can live with that.

  Thanks for the steps, Amiarage.  Looks like we will have to just wait for ATI to fix.

• My PC (Windows XP SP3) restarts unexpectedly when you run Picasa Google Chrome and since I installed Acrobat Reader 10 it also occurs with this program.

  Original title: unexpected reboot

  My PC (Windows XP SP3) restarts unexpectedly when you run Picasa Google Chrome and since I installed Acrobat Reader 10 it also occurs with this program.
                                                                              
  Maybe the problem is related to this message in log file:
  SSD HDD access service-service & can not start due to the following error: the system cannot find the path given.
  Source: Service Control Manager

  I would be very grateful if you can help me.

  Hello

  Step 1: Use disable automatic restart on system failure option and check if you can find any error message. Previous post the error message complete and accurate which could help us help you better.

  Steps to select Disable automatic restart on system failure option:

  1. reboot the computer
  2 start typing the F8 key
  3. you get it anticipated the startup option window
  4. Select DisaDisable automatic restart in the event of system failure

  Step 2: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

  When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

  Original title: microsoft security essentails

  Hi Kim,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

  1. when exactly you receive this error message?

  2. are you on a computer in the domain?

  3 is the Microsoft Security Essentials-specific issue?

  The error messages say about group policy which is the collection of settings that define the appearance of a system and how it behaves for a defined group of users. Microsoft provides a program with a console (Group Policy Microsoft Management Console). The console allows programmers select a GPO that is linked to the directory of centers for domains, organizational units or sites. GPO provides the programmer with security options, the software installation and maintenance options, scripting options and the folder redirection options.

  Response with more information to help you.

• When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  I am running Windows 7 Professional.  I have a piece of equipment that has only Windows XP drivers, I desperately need to work.  I read up on top of the virtual systems and XP mode.

  When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  Thank you

  Andrew

  You must attach the USB device to Virtual PC XP Mode: http://support.microsoft.com/kb/824369

• I recently installed PowerDesk Pro v7.0.1.3 and now, the system hangs when you right click to copy a folder, etc.

  Original title: Windows Explorer has stopped working

  My computer is running XP Home Edition Sp3 and using Norton internet security 2011. I recently installed PowerDesk Pro v7.0.1.3and now, the system crashes when you right-click to copy a folder, etc. I read on this forum of a person having a similair problem and being referred to this site offering a patch that seems to not be available:

  http://KB.avanquestusa.com/Al/12/1/article.aspx?Aid=4030&Tab=Search&BT=4&r=

  Marilyn answers Support Engineer Microsoft's answer also suggested maybe using some registry changes, which I'm not comfortable with because of my limited experience.

  Any suggestion would be greatly appreciated pedro147

  None of these suggestions to the Microsoft support technician will help you, but they will consume large amounts of your time.

  Please post a link to this Marilyn Microsoft engineer answer Support responses involving some registry maybe going to I can see that too.

  Older versions of PowerDesk Pro 7.x are known to cause explore crash, so that the sounds on the right.

  The current version of PowerDesk Pro is 8.5.

  You might be able to get the old version to behave by disabling PowerDesk one shell extensions at a time until when you right-click Explorer no longer crashes.  This will leave you with limited functionality of PowerDesk since those afflicted extensions will be disabled, but you should not have these extensions to do anything, you need to make sheets.

  I would start with the PowerDesk ZIP shell extension (I already know about this one).

  It is a version shortened and changed my notes on the use of ShellExView (since you already think sheets):

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.

  For example, you could Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  Right click and disable Microsoft no suspicious extensions one at a time take a list so you can enable them again later if you wish.

  The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know which extension is the culprit, then you can start to enable them one by one until the Explorer fails again.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.  You can then start to reactivate other extensions to zero on the extensions that are causing your accident

  If the cause of the accident is a third party application or program, their may be a later version of the program available that solves the problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• I get "catastrophic failure: (0x8000FFFF)" when you run backup

  I get the error message when you try to run the backup. I tried to run a check disk at startup, but I get another message indicating that I can't because "cannot access volume. What can I do?

  Hi Paul436,

  Try running the disk drive check WinRE using the full version of Windows Vista disk and check if it helps.

  a. Insert the installation disc.

  b. restart your computer.

  c. When you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at the command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Qosmio X 500 - blue screen or system crash when you play

  I have problems with my new laptop.
  The laptop is a week and I get frequent blue screen errors and system crashes when you play.
  At this time I only tried to play a game: World of Warcraft.

  I have run on:
  The original that came pre-installed graphic drivers.
  The latest updated drivers from the Web from Toshiba site.
  The latest drivers for laptop on the Nvidia site.
  I also removed all the drivers and allowed Windows update to find it's own who have a different version again.

  In these four cases, drivers seem to work fine for a while, but will eventually stop responding and the system crash when I start to play a game.
  It happens shortly after the start of a game and other times it can happen after a few hours of game play.
  Sometimes it will result in a blue screen, sometimes the game will change from windows with the error message on the display driver does not.

  I also did a clean installation using my own copy of Windows 7 with the amount of the absolute minimum of software installed to rule anything that might cause a conflict which was preinstalled.

  I also tried to run to run the game in compatibility mode, although I had no problem with my laptop last run the game in Windows 7.

  The windows event log always indicates a problem with the graphics.

  Did someone else has similar problems or found a solution?
  For a laptop that is announced for the game, I would have thought that this kind of thing would not be a problem.

  Hey,.

  In my opinion, it has something to do with the display driver or the graphics card itself I always use the most recent display of the official website of Toshiba (NOT nvVidia) driver because they are pre-tested. If you install the latest driver from Toshiba.

  After this also make sure that you use the latest version of the BIOS. You can download on the official website of Toshiba too.

  I put t know how long you have your laptop, but it should be cleaned from time to time (3-4 months). Therefore, you can use jet of compressed air to blow off the dust.

  Check it!

• When you run an old compiled Basic program I get a corrupted message message string space, which has never happened before

  When you run an old compiled Basic program I get a corrupted message message string space, which has never happened before

  hch17

  I suggest that also ask you your question to the MSDN Visual Basic Forum

  Visual Basic general forum

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  Don't forget to register

  1 Basic version of the program has been compiled with

  2. the current PC operating system

  3 environment if used programmatically

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com