Satellite L350-264 - how to connect to the TV?

Similar Questions

• Satellite L350 - 20G - how to connect it to the TV?

  Hello

  I bought a Satellite L350 - 20G on Tuesday and just have a question, it will probably be the first of many! I was wondering if anyone knows if you can connect to this laptop to a TV via a cable? If so should which cable I buy?

  Thank you

  JEM

  Hello!

  I think that it of very easy to connect your laptop to an external monitor or TV. If he doesn t have an HDMI port, you must use the laptop VGA port. Therefore, you need a VGA cable and, in addition, a VGA adapter RCA if your TV isn't equipped with VGA port.

  If you are looking for on eBay or online shops for VGA or VGA to RCA cable, you should find enough results! ;)

  And in your user manual, you can also find information on the use of the external monitors. You can switch with FN + F5 the monitor then.

  Good bye

• Satellite Pro M70: How to connect to the internet using a second computer

  I have a Toshiba laptop Satellite Pro M70 with a RTL8139/810 x Family Fast Ethernet NIC use this, the laptop was connected to a desktop PC, whereby it is connected to the internet via a modem ADSL (USB) on the desktop. The laptop runs XP Pro; the desktop has XP Home.

  My laptop has been a nasty virus. When removing it, he lost the ability to network. I tried "repair network", but he could not find an IP address. In the end, I had to manually set an IP address for the network to work again. You use IPCONFIG release and renew the IP addresses that failed - unable to connect to the DHCP server.

  He could now see the Office network and Exchange files across be it, but it could no longer contact internet.

  I decided to reinstall the OS on the laptop, but this does not solve the problem. I still have to manually set the IP on the laptop. I can connect two PCs, but does not see the internet from the laptop on the network.

  If I connect the laptop directly to the internet via the modem, it works fine. I can even access the internet from the computer on the network when this is the laptop that has the internet connection.

  The virus could have damaged the Ethernet controller, or she affected somehow?

  Is it possible to test?

  Have you advice?

  Hello

  The virus was detected on the laptop you so maybe your PC has also been affected.
  Did you check if the laptop and the PC using the same workgroup?

  XP supports a help option. There, you might choose the Internet Connection Sharing Troubleshooter. "

  Maybe it helps

• Satellite L450-181 - how to connect to the TV?

  How to connect my laptop to my Toshiba regza TV?

  Hi ian guest,.

  Unfortunately, your laptop doesn t have output HDMI then you must use the VGA port on your computer. Most TVs also have that VGA port, so you can use a VGA cable to the connector on your laptop to the TV.

  If you did start two devices and select VGA (PC) channel on your TV. Press the FN + F5 key combination to switch between monitors (internal and external).

• Satellite A200-1AX: how to connect to the TV HDMI port

  Hello

  I'm owner A200-1AX (PSAE6E) computer laptop with ATI Mobility Radeon HD 2600. The video card is supported hardware high-definition audio and video, but it has connector HDMI No.. I want to know, if there is any way to connect to the laptop to the HDMI in on the TV?

  Thank you!

  No way dude you can't connect the laptop to HD TV if the laptop doesn't supports HDMI port.

  Some series of laptops Toshiba as P200, X 200, G40, etc. are supported the port HDMI but not an A200

  Good bye

• Satellite L300-1BV - how to connect to the TV?

  Hello
  Should what cable I plug the Satellite L300-1BV to my TV?

  Thanks for the answers in advance

  Hello

  What video ports you have on your Satellite L300 of output?

  I have the Satellite L300 too but he has only normal VGA output. This means that I m using a cable RCA VGA adapter to connect it to my TV. After that I connected the cable that I turn on the TV and then the laptop. On the laptop, you can switch between monitors now with FN + F5.

• Satellite P200-1EE - how to connect to the device using Belkin Mini Bluetooth Adapter

  Please can someone help with my problem.

  I am running Vista sp2 and just bought one of these adapters.
  Tried to load the software and I'm having problems.

  This icon appears in the system tray, but no icon on the desktop.

  Now I have 3 other computers running XP and have installed the software without problem.

  Belkin has called this afternoon and they recommended their virtual software but this has not solved the problem.
  Tried the Broadcom website and download their latest software but still no joy.

  Without the software, I can't pair devices to the computer, but I can print for my C5380.

  Someone had a similar problem?
  What is annoying is that they use a Toshiba laptop like the screenshot in the installation guide.

  Help!

  OK, I worked in a solution.

  The software cd has a file for windows like vista

  The windows folder installs an earlier version of the software, but it works with vista.

  The vista software does not.

• Satellite Pro L510 - unable to connect to the Internet

  Hi, a newbie on this forum so here goes. I got the "fix Windows 7" virus on my laptop because my virus protection that flows. I downloaded AVG which solved some problems, but still not back to the original values. I reloaded Windows 7, but of course I lost all the software preloaded Toshiba & now cannot connect to the internet (laptop computer purchased through the catch of the day).

  What I need to download software/drivers toshiba etc. to address this problem. Thanks for any input.

  Hello

  > now unable to connect to the internet
  Can you write more than one sentence about your problem?

  Does anyone know how you connect to the Internet via modem, LAN or WLAN? More exactly, what happens if you want to connect, you an error message or probably t can find the router?

  Sorry, but without this information there s no end of discussion

• How to connect to the server from VPN Windows Sever?

  Hey guys, I recently created my own VPN server to connect to my home network using Windows Server 2003. I know I probably still need to do this if I don't know what I have to do, but how to connect to the server, or at least set it up in order to be logged in? I think I got the computers communicating with each other, but I think that I am running into errors of authentication. Could someone point me in the right direction with regard to what I have to do what I already have Setup? Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Need to know how to connect to the internet, anywhere

  Original title: internet connection on laptop

  10 years ago, I got a laptop and was able to connect to the internet anywhere I went. I don't remember how I was able to do it without a motem

   

  Hi Susan,.

   

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Want to know how to connect to the internet wherever you go.

  You can use USB dongles to connect to the Internet via a wireless connection.

  We need more information to help you better:

  What version of OS are you using?

  You can use your favorite search engine to search for USB dongles.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also contact an Internet service provider for assistance.

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• using the KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Hello

  I use KDL-46W700 how to connect to the wireless keyboard and wireless mouse

  Unfortunately, you can not connect a keyboard wirelessly on your TV. Your TV will need a driver for this. Sad thing, it's impossible to install anything on the tv, which includes the driver for the external devices such as a wireless (except USB) keyboard... I recommend the SIDEVIEW TV application that has the remote control / function keyboard and mouse... this app is free and can be downloaded via Google Playstore... ^^.

• How to connect to the PC?

  I have problems connecting my crush to my computer. At first I thought it was the SD card, I bought at the store of the cell - I went and bought a new one, that does not work. I put both cards and reading the manual. However, when I insert my USB in my computer, I get a note saying: "the disk in drive E is not formatted. Format it now? "When I click on Yes - It then proceds to tell me to drive cannot be formatted. Now when I try to find my memory card - its completely gone! Help!

  chanondesirae

  Repeat the process of formatting your phone memory overwrite... Make sure that it is not connected to the USB cable

  See Crush online manual p. 48:...  Crush

  Tap Settings on the main screen you...

  Setting > memory > memory card > format card

  • Don't forget... so that the phone crush is connected to your computer via. USB, most of the functions of the phone do not work.
  • Phone crush also card does not appear in 'Settings' until the USB of the PC cable is disconnected

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Have you set the USB Mode mass storage on your Crush in definition... see pages 45 & 46 also in the manual to learn How to connect to the computer

  Post edited by: Poko... to include mass storage Mode information

• How to connect to the server ESXI vSphere Client side WAN?

  How to connect to the server ESXI vSphere Client side WAN?

  through firewall

  I tried to open the ports 902 903, 443... and so on...

  and I tried several sites to find the solution but...

  nothing works...

  connectivity works on local network

  Help, please...

  Source Destination Port

  ESXI 443/TCP client

  ESXi 902/TCP client

  ESXi 902/TCP Client

  ESXi 902/UDP Client

  ESXi 903/TCP client

  Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:

  Example:

  See attachment...

• Satellite M50 161 - how to set up the WIFI connection?

  I use my Satellite as a second computer. My PC is primary and is using a NETGEAR card.

  I used a card reminder in wireless cards because my home office is a bit far from the PC.

  Of course, my laptop has its own part of the ways to get online.

  I've always taken for granted connection. I don't even remember the 1st time I am connected. In fact an engineer could have done to the delivery!

  PC had problems connecting. Host Web server problems. I was expecting sort of my laptop to connect in any case, as it could / should connect to it's own wireless installation to get online. I'm not an expert as you realize.

  It dawned on me while I had no idea how to switch on and connect using the built-in wireless card that not Netgear obviously. Or I'm expecting a lot and the lap top is actually a slave to my PC connection and always will home in on the netgear connection.

  BTW, I'm back online via the netgear but would like to know. Excuse my ignorance...

  Hello

  To be honest I m a bit confused.
  I put t know exactly what you want to do.

  You want to connect the laptop to the other PC via WiFi or connect the Satellite M50 to the WLan router as usual?

  If you want to connect to the Wlan router and then activate the wireless card on the laptop with the WLan switch on the side of the laptop and the FN + F9 key combination.
  Then configure settings such as the SSID, encryption, Mac address, etc. by using windows has the configuration settings or 3rd party software like utility Intel ProSet or Atheros client utility (depending on the Wlan card).

  For more details you can visit the Toshiba Wlan Portal
  http://APS2.toshiba-tro.de/WLAN/

  concerning