Satellite L350 - built in microphone does not work after upgrade Win8

Hi people,

I have this problem since I went from Vista to windows 8. my sound card seems to work ok. My webcam works also. I made sure I chose the right microphone on the Panel etc. so theoretically there is no reason why it shouldn't work... but it is not working.

im guessing it has to do with my laptop being old enough, so no compatible drivers? I have a Satellite L350.

What should I do?
falone buy headphones?

best!
Al

I understand that you want to use newer OS on this old piece of hardware, but it can be problematic to use it if certain model of laptop is not fully compatible.

I think you're the first person who reported thereon. Unfortunately, I can't help you with this but if possible ask a friend if you can get outputs audio headphones and test mic ports.
It will be interesting to know if you will be able to use the headset.

Please post comments.

Tags: Toshiba

Similar Questions

  • Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

    Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

    My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

    Hello

    Method 1.
    Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
    http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

    I suggest updating all your drivers from the link above and drivers Realtek especially.

    Method 2. Set the default Microphone.

    Once the drivers installed to check if the microphone is the default value, here's how:

    Exercise the functions mentioned below to adjust the Microphone as default:
    1. Click Start and click on Control Panel.
    2. click on sound, then a new window will open.
    3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
    4. now check if the Microphone is listed there and right-click on it and choose activate.
    5. turn highlighted that Microphone and click "set as default".
     
    For more information see the articles below:
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
    http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

    After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

    Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

    Hello

    you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

    It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
    Would appreciate comments on your success.

    See you soon

  • Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

    I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

    Hello

    All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

    Order of the facilities is as follows:
    -Windows XP
    -Display driver
    -Audio driver
    Toshiba - common modules
    -SD Card host driver
    -SD Card Driver
    -BlueTooth Stack
    BlueTooth - Easy Connect
    -Mouse driver
    -Modem driver
    -LAN driver included with Windows XP
    -Infrared driver
    -Toshiba Power Saver
    Utilities - Toshiba
    Toshiba - post Mobile
    -Toshiba Console worm.
    -Toshiba Hotkey for display devices

    I hope that you will be able to install Windows XP Home edition successfully.

    Good luck!

  • Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

    I Hare recently upgradedmy Toshiba Satellite L855-149 to the most recent version of windows 8 6.2 and since I did then the Synaptics touch pad stopped working, I guess because the driver does not work with this version of windows 8. What can I do to fix this so I can use my computer without a plug in the mouse again?

    Thank you
    Simon

    Thanks for your comments!

  • Portege M800 - Microphone does not work after upgrade to Windows 7

    Hello world

    I have a Portege PPM81E and am unable to get the microphone not working after having upgraded to Windows 7.

    I tried all the drivers I could find, but no luck.

    Is there anyone out there with the solution?

    Thanks in advance!

    Just a few questions:
    You have upgraded original Hat version of Vista you have with your laptop or you have installed the clean version of Win7?
    All hardware components are correctly installed and listed in Device Manager?
    How do you test feature mic?
    Microphone is in the sound properties > recording devices?
    MIC is set as default device?

  • Satellite U940 - 4000 Graphics Intel does not work after upgrade from 8.1 to win

    I've updated my Satelite U940 11 X 8.1 Windows (from 8.0) and now my Intel Graphics 4000 does not work.
    The Device Manager shows Code 43: windows has stopped this device because it has reported problems.
    I try to download a new driver from Toshiba, but this is not possible. Whenever the download stops.

    Probably for a lot of traffic on the connection

    Were you finally able to download the driver?
    I could download the package without worrying about performance too

  • Satellite M300 - built in microphone does not work

    Hello world

    I bought a new laptop of Toshiba Satellite M300 series and the buitin microphone works in it.
    Any help would be gr8

    Hello

    Satellite M300 is unclear to me that I guess that it s not a European series of Toshiba.

    You said that the microphone doesn t work, but are you sure that this laptop was equipped with the internal mic to 100%?

    In many cases claim that a device internal doesn t work but in most cases such device (internal microphone for example) is not available.

  • Re: Satellite L350-21dts - internal microphone does not work

    Hello

    I have a Satellite L350-21dts running Windows 7 and recently had problems with the internal mic.

    Noise levels during playback are there - but virtually undetectable. I'm guessing that this required updated driver - someone help?

    Cheers!

    Have you checked the mic volume survey?
    Go to control panel of-> sound-> recording tab
    Here, you should see the recording devices.
    Now, you can choose settings / properties and could change the microphone volume

  • Satellite U920T - 100 PSUL1E - WIDI does not work after upgrade from 8.1 to win

    Hi people,

    is there someone who has the job of WIDI? AFAIC he had a symbol WIDI in Device Manager @W7, after the W8.1 there is no way to make it work.

    Try to use the Intel driver fails because custom toshiba Driver, the last driver from Toshiba is dated with 28.10.2013 that should be a beginning driver W8.1 or W7.

    Is this something like the functionality of GNSS Broadcom? Build but still not usable?

    Hello

    According to Toshiba information I found in the bulletin of the technical support document, the Intel Wireless Display are no longer supported on Windows 8.1, but you may be able to connect to the external display wireless, if your computer supports Miracast.

    Here is the link to the doc:

    Important notice for users of Wireless Display (WiDi)
    http://APS2.toshiba-tro.de/KB0/TSB3903IF0000R01.htm

    By the way: the Intel display driver can be installed and updated but you have to do it in the Device Manager. You need to download a zip package containing the only driver files, and then you can update the driver using the procedure in the device manager that allows you to choose the driver folder that contains only files.

  • Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

    My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

    Hey Buddy,

    What does it mean exactly when you say he won t work?
    You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

    At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

  • Projector does not work after upgrade from Sierra

    My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

    Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

  • Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

    My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

    Help please

    Hi asalamk,

    The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

    You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

  • HP Laserjet 2100 does not work after upgrade Windows 10

    HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

    Thank you!

    If the printer is connected using a parallel printer cable, please see the link below for the solution.

    http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

  • VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

    Hello

    I upgraded the PC host, but also virtual machines to Windows Pro 10.

    TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

    Is this a known issue?

    Thank you!

    Kind regards

    Joe

    SOLVED!


    I uninstalled VMware Player, including the abolition of the configuration files.


    re-installed VMware Player and it worked!

Maybe you are looking for

  • Could someone fix my program?

    Hi, I would like to imae panorama. If I open two consecutive images (for example 1. jpg and 2.jpg or 2.jpg 3.jpg or 3.jpg and 4.jpg), it works fine, but it fails at the third picture.  I'd like that when I opened 1.jpg, then 2, then 3, then 4.jpg it

  • 2012 event Dynamics recording control array

    In the upgrade to LV2012, I discovered what may be a bug, or at least an incompatibility between 2011 and 2012 with respect to dynamic registration of an array of controls as opposed to individual control references. This piece of code worked in 2011

  • telstra icon appears not central in the menu of the Office start icon

    the shell of telstra appears not central in the menu of the start desktop icon.

  • How to scan discs FM tuner?

    Hello! I got a 4 GB clip last week and reading posts here it can record from the tuner fm, but there is no mention of this in the manual or the instructions that I can find online... Someone help? Thanks, Ted

  • Problem notifications Todoist on SWR30

    I have problem with notifications on Sony smartband SWR30. All other applications work fine and I can see notifications on my talk SWR300 smartband