Satellite L350 - connected to the bridge with limited access

Similar Questions

• I have a problem connecting to the internet with remote access.

  Hi I have a laptop Dell Inspiron. I installed Vista and now I am unable to get on the internet. I use the dial upward at home. None of my ISP disc make me on the internet... It gives a message that there is a problem with the hardware. What can I do to fix this?  I had XP before and it worked fine.

  Hello

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  If there is no vista drivers available, you're out of luck and that the machine was not built by Dell for vista

  If necessary, use another computer to download and save = copy to flash drive - transfer and then install them

• Activate Adobe on a will not connect to the computer with internet access

  How to activate Adobe on a standalone computer?

  This is the forum Adobe Reader that doesn't require activation. If you let us know what you are trying to activate, we can send you in the right direction.

• Unable to connect to the bridged casting of Chrome with WRT1900ac

  I have Verizon Fios that doesn't let you not use your own router has its own.  Instead, I have a WRT1900ac passed on ethernet to the router Actiontec verizon provided.  Melting of chrome only supports 2.4 ghz.  When I am connected to the network 2.4 ghz with the control device I can control fine.  However, when I connect to the 5 GHz network on my device, it does not recognize the chromecast.  It seems that I have to turn off the AP isolation, however I can't find this in the settings of the bridged router limited menu.

  You can try it but it never worked for me and said it may not work:

  192.168.1.1\Wireless_Advanced.asp

  Let us know if it changes whatever it is for you... otherwise, I recommend that you call your Linksys contact Regional Office support and ask for help and information about it. We find that the telephone contacts has better immediate results on the use of electronic mail.

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them

• Error 0 x 80042318 - I am connected to my network, but with "limited access".

  Although I have installed and am running and using the IE Version 9.0.1600., now, I am unable to do a full full Internet_Connection.  I am connected, but with "Limited access" and consequently, nomatter who HTTP://WWW.Address I try to connect, the page always comes back to the page 'WWW.Blank'.    Any assistance that may be available to be appreciated.  Thank you!...      Other info, are as follows: -.

   

  Product... COM event system.
  Problem... Stopped working
  Date of... 25/04/2011 15:56
  State of... Not registered... Signature of the problem

  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef23d3820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  Files helping to describe the problem
  Version.txt... AppCompat.txt... memory.hdmp... minidump.mdmp

  ======================

  Product
  System event COM +.

  Problem
  Stopped working

  Date
  23/04/2011-16:15

  Status
  Not reported

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef2243820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  =============================

  Product
  System event COM +.

  Problem
  Stopped working

  Date
  18/04/2011 12:55

  Status
  Report sent

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef3cd3820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  Files helping to describe the problem (some files may be is no longer available)
  Version.txt
  AppCompat.txt
  Memory.HDMP

  Additional information about the problem
  Bucket ID: 215206108 =.

  Product... COM event system.

  Problem... Stopped working

  Date ............... 18/04/2011-19:27

  State of... Report sent

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef3e23820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  Additional information about the problem
  Bucket ID: 204865927 =.

  Product
  System event COM +.

  Problem
  Stopped working

  Date
  18/04/2011 12:55

  Status
  Report sent

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef3cd3820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  Files helping to describe the problem (some files may be is no longer available)
  Version.txt
  AppCompat.txt
  Memory.HDMP

  Additional information about the problem
  Bucket ID: 215206108 =.

  conduit
  Host process for Windows Services

  Problem
  Stopped working

  Date
  21/04/2011-21:03

  Status
  Not reported

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: StackHash_9cfd
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 000007fef2d13820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 9cfd
  More information 2: aea2a0d7a408bfb90d70a40b35741536
  Additional information 3: add1
  Additional information 4: e86fd8f76207b04502fc8a8c6058a723
  =======================================

  Product
  Internet Explorer

  Problem
  Web page display problem

  Date
  20/01/2011 16:30

  Status
  Report sent

  Description
  A display of a webpage caused problem refreshing the page using the Internet Explorer compatibility view.

  Signature of the problem
  Problem event name: MSHTMLLAYOUTHARDASSERT
  AppName: iexplore.exe
  AppVer: 8.00.6001.18702 (longhorn_ie8_rtm (wmbla). 090308-0339)
  ModName: mshtml.dll
  ModVer: 8.00.6001.18702 (longhorn_ie8_rtm (wmbla). 090308-0339)
  Offset: 0x003D6226
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105

  Additional information about the problem
  Bucket ID: 1530749661 =.

  Fault Module name: netprofm.dll_unloaded

  Fault Module Version: 0.0.0.0

  @ Poppyjoe.Joe

  Find out why this module is still used even if he was apparently discharged?   You can use ProcMon or DepedencyWalker to get more clues to this topic.
  Good luck
  Robert Aldwinckle
  ---

• Vista Wi - Fi connected with limited access

  I can't connect to the internet.  My shows of WiFi - connected with limited access.  When I view the status of wireless network connection - it shows IPv4 and Ipv6 not connected.

  This suggests even more than the fastest and the best option you have is to contact the ISP and have them help you with the installation and check all devices (including their and their connection to your location).  You can fight with various alternatives that may or may not work because we are not sufficiently familiar with your Installer, equipment or requirement of ISP, or you can go directly to them and I'm reasonably sure they'll have you facing up and running without delay (assuming that it is not a hardware problem or something at their end).

  The decision is yours.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Unable to connect to the internet with Foxfire. Can do with Internet Exporer

  I've been using Foxfire. After an update I can no longer connect to the internet with Foxfire. IE can connect.

  Firefox is the name. Foxfire is a bio-luminescent fungus.
  
  http://en.Wikipedia.org/wiki/Foxfire _ (bioluminescence)

  See this support article - difficulty of problems connecting to websites after Firefox update

• Tecra M3 has ceased to connect to the internet with cable

  I have an old laptop Tecra of 3 year (out of warranty).
  Last week, he stopped to connect to the internet with a cable. I tried several cables and jacks. No idea what to do?

  LAN card is entered correctly in the Device Manager?
  LAN port has two leds, green and orange. Green LED is turned on when you connect the LAN cable?

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Unable to connect to the internet with other programs (like Zune) but internet explore still connects.

  I can connect to the internet with internet explore very well. No problems.  But when I try to connect another program to the internet, like Zune or Wildtangent games the program says that I'm not online.  I know that I'm online because I check to make sure you Internet explore, and which still works.  I already tried to change the firewall settings to allow programs through, but that did not work either

  Hi Chloe,.

  1. What is the exact error message?
  2. Since when are you facing this problem?

  However, try the following steps.

  Step 1: Add zune except for windows firewall.

  1. click on start toreduce this includes this image, type firewall.cpl in the Search box and press ENTER.

  2. click allow a program through Windows Firewall. Collapse this includes this image
  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  3. click on add program.

  4. click on Browse.

  5 locate the Zune and then click Open.
  Note By default, the Zune is installed in the following location:
  C:\Program Files\Zune\

  6. click OK twice.

  Step 2: Windows live onecare

  1. Start Windows Live Onecare.
  2. Click change Onecare settings.
  3. Click the firewall tab.
  4. Click on Advanced settings.
  5. Scroll through the list of programs to determine if Zune appears in the list.

  ·         If Zune appears, make sure that the Zune is set to allow instead of block.

  ·         If Zune does not appear, follow these steps:

  1. click on Add.

  2. Locate the Zune and then click Open.

                  Note By default, the Zune is installed at the following location: C:\Program Files\Zune\

  3. click OK twice.

  http://support.Microsoft.com/kb/927980

  Try these steps and let us know the result.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to add a second connection of the user with windows 8

  How to add a second connection of the user with windows 8

  Go to the Control Panel, then click on change the Type of account in respect of the accounts of users and parental control.  Beneath the box with user accounts, there should be a link that says add a user account.  Click on that and follow the instructions to set up another user.

• My laptop cannot connect to the internet with the error (code 31) Qualcomm Atheros AR9485WB-EG Wireless Network Adapter

  Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.

  I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

  I forgot since when this problem persists.

  Please help me with this problem of internet connection,

  List of maybe / don't may not be the problem:

  1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus

  2. my windows is still 8.0

  3 ASUS N56V

  4. browser chrome incognito window

  Thank you Mr President, I found a solution for this problem

  I just turn on the download via connections counters my PC-> devices config->download via connections counters

  and then I tried to enter the following command at the command prompt run as administrator

  netsh int ip reset c:\resetlog.txt

  I hope this helps anyone else having the same problem as mine

  Thank you again Sir

• Unable to connect to the server with ttisqlcs, failed to retrieve IP address of the system

  Please help me, I have installed timesten server and client on different machines in the LAN, but with the same user and group - ttadmin:ttgroup

  When I tried to connect to the server with ttisqlcs - connStr "DSN = sampleCS"

  The result gave me errors like below

  Connect "DSN is sampleCS ';.

  S1000: Unable to retrieve the IP address of the system. System error:-2

  The command failed.

  Fact.

  The related part in sys.ttconnect.ini is defined as below

  [192.168.0.206]

  Description = TimesTen Server

  Adresse_reseau = 192.168.0.206

  PORT_TCP = 53397

  And the sys.odbc.ini

  [ODBC data sources]

  sampleCS = TimesTen 11.2.2 Client Driver

  [sampleCS]

  TTC_SERVER = 192.168.0.206

  TTC_SERVER_DSN = nredb_ds

  That wants it mean by 'recovering intellectual '?

  He is trying to resolve IP by hostname even when I already gave him the ip address?

  Either way, I can ping 192.168.0.206 and telnet to port 53397 without problem.

  Please help me, thanks ~

  It does not matter that they are VMs (I use between virtual machines all the time), but "Networking" of VM, of course, must be set up correctly. But if you can ping and telnet between VMS so that shouldn't be a problem.

  On the client computer, you have an entry in/etc/hosts for the client machines and the server? Even on the server? Please check that and add entries if they are not there and see if it helps. If not then we need to find the client using 'strace' to see which system call fails. Please try and after the release (or at least the last part that leads to failure).

  Thank you

  Chris