Satellite L350 - don't wake up from sleep mode

Similar Questions

• Satellite A500-18 x - don't wake up from sleep mode

  I've had this laptop for a little over a week and when it goes into mode 'sleep' trying to wake him up, all the lights on the keyboard lights up and I hear it works but the screen remains black. I updated display drivers and that fixed it for a few days but now it stopped working again. updated audio drivers would force it to not wake from sleep mode kos that he worked well, since I've updated the display driver and then yesterday I updated audio drivers and he returned to not wake up once again in mode 'sleep'. any help much apreciated.

  Updated the BIOS and update the driver to display again.
  Maybe the after the audio driver that something was wrong, you can clean the registry using CCleaner in most of the cases it s a good idea.

• MacBook pro freezes for 5-10 minutes everytime I wake up from sleep mode?

  Since the upgrade to Yosemite, my macbook pro goes to the loading screen grey which usually appears when opening my laptop after that he almost dies everytime I wake up from sleep mode. It freezes on this screen for a few moments, and then when I get to my normal screen, it continues to remain frozen for an extra few minutes. The mouse will not work until a "Set up Bluetooth keyboard" menu appears, then disappears. The problem has persisted through several software updates. I searched endless forums and topics, but none seem to match my problem. Can anyone help?

  Data sheet:

  OS X Version 10.10.1 Yosemite

  MacBook Pro (15-inch, mid-2012)

  2.3 GHz Intel Core i7 processor

  16 GB 1600 MHz DDR3 memory

  Free to 318,84 GB 107,02 GB

  I had the same situation; started during the upgrade to Yosemite, continued with El Capitan. I tried a n y t h i n g for a few months, revisiting the forums etc. The message in the system log, leaving the "driver GPU seems to be suspended. Does my Mac Pro completely unworkable. It was a software problem because it does not occur in safe mode. Now I just went down to the Mavericks and the problem is completely resolved. I can use my computer again.

• New installation of 8.1 on Y510p guard pro wake up from sleep mode

  Any ideas on why a fresh install of windows 8.1 vanilla pro would keep wake up from sleep mode? What spectator even can I look at to understand this?

  It seems that turning off sleep timers solved my problems. I also disabled standby (but not sleep) when it is plugged in and the laptop stay asleep until he does it's nighty WHS backups and then fall back to sleep now.

• Computer Windows XP doesn't wake up from sleep mode.

  Original title: standby mode does not wakeup.

  Windows XP PC collapsed to wake up from sleep mode.

  Hello

  Glad to know that you have solved the problem.

  If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

• laptop won't wake up from sleep mode

  laptop won't wake up from sleep mode

  Hello

  Here's the quickfix.

  Set the laptop to sleep instead of Hibernate. Portable computers may have problems with the Hibernate function. Here are the instructions to navigate:

  1. go in Classic view of Control Panel. (Ctrl + ESC, then type 'control' to quickly control panel access)

  2. double-click on the icon power options

  3. click on "change when the computer sleeps.

  4. click on "change power avancΘs."

  Go to the menu of sleep and

  value "Allow hybrid sleep": OFF

  * Set the parameter "Hibernate after": NEVER

  Note: You need to type the following in the field, what is not there drop down to select.

  This is most likely the issue and the resolution. However, here are a few other troubleshooting steps if you have any questions:

  Troubleshooting of the sleep mode function:

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Hope this helps,

  Steve <> Microsoft Partner

• Connect button on Windows 7 that SOMETIMES appears to wake up from Sleep Mode, sometimes goes right on the desktop

  Hello.  Suddenly, from this morning or perhaps yesterday (April 15), when I click my mouse to wake up my new Windows 7 Inspiron PC from Sleep Mode, a Windows login, button began to appear is no longer for me to need to click.  Only a few minutes ago, when I woke up my PC by clicking my mouse, the button HAS appeared!  Does the show button only SOMETIMES, as every time the PC is asleep (hibernation?) for a SHORT time or long?  I'm puzzled about why this behavior started all of a sudden. Initially, he always showed the button - but maybe it's because as a first step, maybe I had waited long before going to my PC to wake him, don't know.  This new variable behavior could be linked to the 12 April Security Update for Microsoft .NET Framework which perhaps has not taken effect until a subsequent Restart, that maybe, I did last night or this morning?

  Thanks for the ideas.

  Alyse

  Hi Evelyn,

  This problem is perhaps due to the power settings on your computer. Ensure that requires a password on the alarm clock is set. See the following steps.

  1. Click Start, and then click the power Option.
  2. Choose several power supply options. In the Power Options window.
  3. Click on request a password for reactivation.
  4. Save changes and check.

  If the problem persists, run the power Troubleshooter and check. Check out the following link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Satellite U300 falls down and cannot wake up from sleep mode

  Hello

  I got a Satellite U300 a few days and I get in trouble, when the laptop goes into sleep mode.
  The thing is that when he goes to sleep, the screen turns off but the light stays on (blue), instead of flashing with an orange color.

  It is not possible to wake the portable computer, and the only solution is to restart the computer.

  I tried the different possibilities to enter sleep mode, and I get the problem mainly when the computer is in high-performance Vista and when you press the stop button in the quick menu.

  I know Vista gives a certain a lot of problems, but I didn't know anyone here who face the same problem.
  Should I send the laptop back to technical support?

  Thanks in advance,

  I had the opportunity to work a little with several laptops from Toshiba, and one of them was Satellite U300. After a brief check of the basic functions for laptop I can say with certainty that switch between mode and standby/hibernation mode work well and I didn't notice any problems.

  I really don't understand what is wrong with that, but please do:
  -If you want to switch to standby mode, choose option using the button START.
  -Wait a bit and I hope after a few seconds, the laptop will change automatically in standby mode (blinking amber LED)
  -Close the cover
  -Wait a moment opened the lid and press the power button
  I really hope that your laptop will start correctly and you will be able to use the OS again.

  Good bye

• Wake up from sleep mode, monitors turn on but no image is displayed. HP ENVY Phoenix h9

  Product: HP ENVY Phoenix h9 PC Series

  Product #: H3Y51AA #BL

  Model: h9-1387

  OS: 8 64-bit Windows

  Monitors: DELL 2407WFPHC x 2

  Updated graphics drivers to the latest version non-beta.

  Hello

  Since buying my PC a few months ago, it has been one of the ' display' problems after another. This is the current problem:

  When executing step by step away from my computer, I block via Win + L and shortly after that my monitor turns off. When you return a few moments later, I try to wake up to the top (but not really "wake up"...) To try to solve the problems of previous display, I already disabled hibernation options and sleep) my computer by moving my mouse. This causes monitors leave standby mode and be able to raise but what is dispalyed is black screens when I should have been introduced to the login screen.

  Mouse clicks and keyboard do nothing and I'm stuck at black screens. To continue, I press the power button on my PC causing the hard drives to spin-up and shortly after the computer turns off. I press the power button and start the computer to the login screen where as soon as I get my password, Windows loads and all my programs etc appear like they were before I blocked my PC.

  You can see previous problems, I had the list below, if all goes well they will help you to detect the cause of the current problem.

  Help, please.

  Thank you!

  Peter

  Previous problems I had:

  (1) when the awakening from hibernation, the computer would not wake up screensavers leaving no way for you to connect and save your work. Hard reboot needed. Solution: Disable hibernation Windows features.

  (2) error in the sense of "driver has no display and recovered." Possible solution: disabled hardware acceleration in Firefox.

  (3) when waking from sleep, I find that my 2 monitors have merged into one and a different resolution than usual. Once entered password to connect, programs that were on separate monitors are now on the same monitor. Right click on the desktop and selecting 'Screen Resolution'-> 'Detect' would set monitors to return to normal until the problem recurs. Possible solution: updated graphics driver. Don't know if this problem has been corrected, it may have just been concealed by the new problem mentioned above.

  Thanks, but the steps above had no effect.

  However, during a windows update, my graphics card driver has been restored and that seems to have stopped the problem.

  Unfortunately, again I see apps that were on two screens before lock/standby, appearing on the screen even after release sleep/wake. So far he did not often so we'll see.

• Satellite U300 doesn't wake up from hibernation mode

  Hello

  I was wondering if someone can help me,

  I have problems with my brand-new Satellite U300.
  When it comes into sleep/hibernation mode I can't have to reactivate.

  The power led remains blue. In the order of UDE the laptop I have to turn the power off completely and then re-boot.

  How can I stop this from happening?

  Thank you

  Hello

  I think you should try to update the BIOS.
  On the European driver Toshiba page, you will find compatible drivers and BIOS.
  Then first try to update BIOS and then check if it helps.

  Good luck

• T400 - Fn key wake computer from sleep mode.

  It is therefore normal that pressing the Fn key + another key (on the keyboard) - computer wakes from sleep?

  Or something wrong with the operating system?

  In fact, the single Fn key should wake up the machine to sleep/wake.

  Nothing wrong with the operating system.

  Kind regards.

• Alienbware X51R3 with S2716DG from Dell doesn't wake up from sleep mode

  I recently bought a new Alienware X51R3 and Dell S2716DG Monitor. The PC happened a few weeks earlier from the monitor, and the system worked very well (and wake up from his sleep normally) on the old monitor.

  After setting the new monitor (executed in a single monitor configuration) on the display port, the PC is no longer waking up from his sleep. I tried to update the driver for the monitor and turning off the monitor 'Deep sleep' works without success.

  It worked fine with the previous monitor so I think that the monitor is most likely the culprit but haven't found a solution or work around yet. Power off the PC everytime I walk away from it or disabling sleep seems completely unnecessary.

  The Dell Support program help hard locks - the PC every time I launch...

  After a little violin, I was able to adjust the settings for PCI Express Link State Power Management from the command line with:

  powercfg 381b4222-f694-41f0-9685-ff5bb260df2e 501a4d13-42af-4429-9fd1-a8218c268e20 ee12f906-d277-404b-b6da-e5fa1a576df5 0

  Will test the sleep options and report.

• mouse and keyboard do not work once the computer wakes up from sleep mode

  running Win7 64 bit

  Processor Intel core 2duo
  x 2 corsair 2 GB RAM
  ATi Raedon 4800 series gfx
  all the drivers are up to date.
  no idea why they don't work after the release of the mode not sleep? It is very frustrating as I have either stop whenever I'm done with the computer, or reset when it comes out of sleep mode.

  Oops, ok, so I disappeared for a bit there.

  Yes, I tried that as well.
  OK, so, this weekend, I flashed my bios. and that seems to have solved the problem (woohoo)
  for anyone else reading this, if you are not very savvy with computers, I would say DO NOT Flash your BIOS, but find someone who knows a little about computers to do it. If you do not Flash your BIOS correctly, it can damage your motherboard

• Satellite don't wake up from sleep or hibernation when the lid is closed

  It is a problem that I had with my laptop from the outset - if the laptop is in sleep or Hibernate mode and the lid is closed, or the lid is closed and will switch "standby" from there, it won't wake up or respond to the switch once again opened.

  Even holding down the power button has no effect, the only way to turn it back on is to remove the battery, put it back and turn the phone back on, lose anything I had opened.

  I fear that the laptop could be damaged by this, but there is no other way.
  This isn't a problem with the settings of windows, I had the same problem with the function suspends in ubuntu.

  Anyone had similar problems or know anything than either could have caused this?

  What model of Satellite L do you have exactly?
  What system is pre-installed? Have you tested this problem with laptop recovery fees?

  BIOS is up to date? If it is not updated in the BIOS.
  After update BIOS, set the default BIOS and test the features of the laptop.

  Your comments would be appreciated

• Satellite L300 automatically wake up from sleep mode

  Hello

  I have Toshiba Satellite L300.
  One day I found that when I close the laptop it goes in standby mode (as it should), but after a few minutes it is turn on even if it is still closed.

  After several minutes, that it's going to sleep again and then again are put on...
  Before there was not such a problem!

  What is the problem with my satellite?

  Hmm that's strange
  Maybe wake up on LAN or another wake-up call option affects this stand in mode?

  Try to disable this option in the BIOS and in device-> properties-> Advanced tab LAN Manager.

  Have you also checked the settlement by Vista power management settings?
  Do it!

  + How to manage Windows Vista power management features? +
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41