Satellite L350-H20 HDD / SATA-Controller Driver

Similar Questions

• How to add a SATA controller driver to the ESXi 3.5 installation CD (edited)

  Salvation to the whole community,

  Today, I downloaded and tried to install VMWare ESXi on a Core Duo Quad system.

  The motherboard is an ASUS P5KPL-CM with Intel G31and ICH7 Chipsets.

  The pc is equipped with a SATA hard drive.

  The question is:

  Immediately after clicking on install, I get a message as "impossible to find a support machine to write the VMWare ESXi server.

  Related to the issue I have add this question:

  It is essential that the HDD on the installation location, I have to be a VIRGIN or EMPTY? Or it is not?

  In other words, what happens if ESXi installer detects something on the disc (i.e. the drive entirely with a Windows bootable partition)? ESXi Installer has an option of disc clear or if no partition is present, the result is the issue I described above?

  I ask because I see that here http://www.VM-help.com/ESX/ESX3.5/Whiteboxes_SATA_Controllers_for_ESX_3.5_3i.htm are mentioned some systems with ICH7 chipset.

  Of course, it's a matter of controller. On this pc, Windows XP Pro installed fine, no SATA driver required.

  This is the reason for this post.

  Thank you all so you help me with the right tip.

  Robert

  Hi Robert, VMware has changed the way ICH7 controllers are recognized between update 2 and update 3.  With neither release were connected ICH7 readers supported, but with update 3, the controller is supported for CD-ROMs only.

  To get there I would be supported installation update 2.   You can then change oem.tgz to reverse changes 3 fact update.  Take a look at this thread for more information - http://communities.vmware.com/message/1094540#1094540.  You can also try this install method - http://www.vm-help.com/esx/esx3i/ESXi_install_to_IDE_drive/ESXi_install_to_IDE_drive.php.

• Satellite L350-277 - can I install driver touchpad of another model?

  I just changed from a Satellite M70 and the touchpad performance is far superior. Is it possible to install the driver for the touchpad on the L350 M70? Anyone see any problem?

  The Satellite L350 pilot leaves the pointer jumps all over the screen. Before say you 'change settings' - I - for about an hour.
  The Satellite M70 driver has much more stability and more features - like every corner can have a function - copy / paste for example.

  Every technophobe in the Toshiba got ideas, before I screw to the top of the main interface on my new L350.

  Hello

  I can t imagine that jumping is caused due to the driver. Make sure that you do not touch the touchpad if you type something. Alternative, you can disable the touchpad due in writing if you press FN + F9.
  Check this box!

  And before you install a driver from another laptop you need to test the latest driver for your laptop. Please first check from Toshiba Web site for an update of the L350 driver:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  By the way: what OS is installed at present? Do you use a preinstalled OS from Toshiba?

• Missing satellite C870 - 11G - "SM BUS controller driver" for Win 7 64 bit

  Good afternoon

  After extensive research of the forums, I was unable to find a solution so far.

  A few months ago, after the demise of his previous Satellite, my friend has acquired a Satellite C870 - 11G on Windows 7 (64-bit).

  She acquire the machine online from PC World, and after that make the updates of windows put in place using the Zonealarm free firewall & 2013 AVG antivirus free. We have installed the Microsoft Office 365 and the bundled drivers for HP Deskjet F4180 sound.

  Initially, everything went very well, but a month ago, the machine does not recognize the printer.

  After the troubleshooting thing, the machine has reported a "SM BUS controller driver" as being missing.

  "Search etc, after much net more faffing autour with the restoration of the system", I could not yet set and so went to the "nuclear" option i.e. I backed up all its data and doing a complete reset of the recovery partition.

  We have gradually been put back together, reload its data, re-installing of ZoneAlarm and AVG, Picassa & Office 365. Yesterday I went to re - install printer drivers, but before doing so checked Device Manager to see that the error "SM BUS controller driver is missing" was. Grrrrr...

  I tried to use system restore to return point of restoration of a restore point but that too now fails every time with error (0x80070005).

  Before we go again nuclear, anyone has any ideas please...?

  Best regards & thanks in advance.

  Larry

  Try please reinstall the chipset driver. I found this for your machine and you can download it here.

  Test it please and post comments.

• AMD SATA Controller driver for HP G62-a18SA (XC302EA #ABU)

  Hello

  I think to buy a copy retail Windows 7 64 - bit to do a completely new install on my laptop HP G62-a18SA (XC302EA #ABU) and so am trying to gather and record the necessary drivers, I have to reinstall later.

  Can someone tell me where I can download the AMD SATA controller for this laptop?  Device Manager appears in the:

  Driver provider: AMD

  Driver date: 10/07/2009

  Driver version: 1.2.0.164

  It is not listed in the downloads section of driver for this laptop in particular HP support site.

  AMD is different from that of Intel, a Sata driver is not required to install W7.

  There are many backup programs free driver you can use to back up the existing drivers and then use this backup to reinstall it on the new facility.

  http://www.boozet.org/DD.htm

  http://sourceforge.NET/projects/drvback/

  http://www.innovative-Sol.com/DriverMax/

• Precision T5600 SAS/SATA Controller Driver

  I recently received the workstation Precision T5600. The original configuration was the installation in RAID 1 with 2 SATA drives. I killed the RAID and loaded a single drive SAS instead of RAIDs. When I loaded a Windows 7 installation disc, windows could not see all of the hard drives. So my question is there a place where I can download the driver for the SATA/SAS controller and throw on a USB to load during the installation process of Windows 7?

  Thank you.

  Dell Dear user community.

  I having the same problem as jHartweck,

  I recently bought the Dell Precision T5600, but I'm not able to install Windows 7, because the SATA/SAS controller driver is not available.

  Someone of you managed to solve this problem?

  I'm looking forward to your reply.

  Sincerely,

  Micha Joosten

  Administrator COMPUTER

  Logistics engineering INTHER

• Satellite Pro L10 SM Bus controller driver needed

  I'm missing a Base system device driver and a SM Bus Controller Driver please anyone could tell me where to find these drivers, I am running Windows XP
  Thank you

  Hi soumah

  Have you installed the operating system from the Windows CD or the Toshiba Recovery CD?
  It looks like the installation of Win's CD.

  In this case, you must download all the drivers from Toshiba on the Toshiba site and install it in the right order!
  Generally, the installation instructions should be placed also on the page of the Toshiba driver.

  Install all the necessary drivers or use the CD recovery Toshiba and you will solve you question

• What SATA controller driver is necessary for Win XP on Satellite L300 BRAND

  Hello

  I need to get rid of vista on my new laptop preinstalled and was going to put Win XP. Of course, Win XP doesn't have SATA support. I've read on how to do (i.e. nlite drivers during the installation of Win XP disk in some way), but I could not find the drivers for it on the web page of Toshiba. Could someone please help and point me to the correct driver for this machine?

  Thank you very much in advance,

  What you need is the Intel Storage Manager.
  The European Toshiba page provides this crib of storage, but you can also download it from the page of Intel. Simply search for Intel Matrix Storage Manager.

  The package contains files different and different SATA drivers for different chipsets.

  Check it out I m that the Storage Manager is the key ;)

  Good bye

• Satellite A100 - 233 PSAA8E - need controller driver Ethernet & network

  Hello!
  I have a Toshiba Satellite A100-233 model No. PSAA8E-061022AR.
  I looked on http://gulf.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?LNG=13&service=AE&mode=a llMachines & action = search & teddProduct = 653 & selShortM od = 471 and I found no driver for my network controller and Ethernet controller.

  In fact I have internet and I cannot find this driver on any site.
  Can you help me by providing me with the driver (a link to it for example)? Thank you much in advance.

  Hello

  The drivers are placed in the area of the Archive because the A100 is an older model laptop.
  In product Type Choose Archive ;)

  Then you should find the driver LAN and WLan.

• Re: Satellite A300 PSAGCE: need HDMI Controller driver for Windows XP

  I have Toshiba A300-23d (PSAGCE) and I have downgraded to Windows XP.
  Everythink work fine aprat from controller HDMI.

  Need controller HDMI for Windows XP.

  Hello

  The driver for the HDMI Control Manager is only available for Vista 32 bit and 64 bit!
  There is no special driver HDMI for Win XP!

  But why are you needed it?
  I m not an A300 owner but my other Satellite was equipped with HDMI port and I installed Win XP too.
  I n t need a driver HDMI in order to use the HDMI port.

  I have connected my external monitor via a HDMI cable and everything works perfectly!

• Satellite L30 - required USB serial controller driver

  Hello everyone,

  I can't find the driver for USB-serial controller C for my Satellite L30.
  Needs in order to connect my Samsung mobile.

  Thanks in advance,

  Jacob

  To be honest I had never heard about USB-Serial Controller C.

  The windows operating system contains drivers own controllers USB (USB port).
  This means that you will not find any special drivers for USB controller.

  If you have some connection with the cellphone problems then I recommend to install the software that was supplied with the mobile phone. There is always a CD with the software.
  Before installing this software, you must uninstall the previous software.

  By the way; You can delete the C USB-serial controller in Device Manager and reboot the laptop. Then check if the windows will recognize this controller again.

• Satellite A210-1AS - need Ethernet Controller driver for XP?

  Need driver for Ethernet Controller for XP.
  They are not on the Toshiba site and I need the driver to connect, someone help?

  Hello

  If I m not mistaken this laptop Equium A210-1AS belongs to the PSAFJE series.

  According to me it was equipped of the * Realtek(10/100M) 10/100MBit LAN chip *.

  So if you need an XP driver for this chip LAN then I recommend you research the Realtek is website owner.

  Best regards

• What better way to use Win XP - Satellite L350-150 or Sat P300 - 18 M

  Hey Yes,.

  I m planning on purchasing a L350-150 or a P300 - 18 m and I would like to install Win Xp on it.
  I have a Win XP CD I want to use for this purpose.

  These models have the problems to decommissioning in Win Xp. (e.g., hard disk, etc.)

  See you soon.

  Hello

  I think you should search here a little bit because there are many threads that describes various issues and solve simple problems

  As far as I know Windows XP should run on both computers mobile service without worry
  And for both sets of the Windows XP drivers are available on the European driver Toshiba page.

  Concerning

• Satellite L500 pslkoa - missing network controller driver

  I've updated my laptop L500 pslkoa-00r009 for windows 7 and I now cannot acess internet its showing that I have no driver for my network controller, I can not find the driver to download

  Where can I download the driver?
  All I have to do to solve this problem?

  Thanks in advanc e

  XX

  Hello

  try to install the lan driver:

  http://Support1.toshiba-tro.de/Tedd-files2/0/LAN-20100121091305.zip

  WLAN driver:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  You can also do a search yourself:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite L350 - error DVD Recovery "invalid drive".

  Hi all
  I'm trying to restore my system with the recovery system 2 DVD (made with the utility).
  Everything's fine until it fails at this point:

  -------
  Copy the files from the recovery database
  -------
  The volume of your selected is not valid or does not exist.
  There is no volume selected.
  HTMPREP...
  Invalid drive specification
  ERROR: File recovery database copy failed!

  Any help please? So far I can't do anything that everything has been cleared...
  Thank you.

  Hello

  Format the HARD drive and try to restore the system using the disk recovery once more.
  If this does not work, then several reasons could be responsible for this problem.

  (1) the recovery discs are corrupted, or not created properly
  (2) the HARD drive or partition is may be defective

  If reocvery discs are defective, then you can order a new one by clicking here:
  http://backupmedia.Toshiba.EU/landing.aspx

  in case two, replace the HARD drive...