Satellite L350 (PSLD8E) - Ver.Num disabled and I can't use it
Friends I have a serious problem with the key (Ver.Num). I press the button-online no light and I can't use numbers. Can you help me please?
BIOS-online 1.90, L-350, PSLD8E (Toshiba laptop)
Note: There is no option in the BIOS settings and I format with XP Pro and Windows Vista, but NO RESULT
Please if you have ANY suggestions to contact me on [email protected] thanks
You mean that you can not activate the numeric keypad with NUM LOCK key?
Have you installed the new OS using Toshiba recovery image and tested with factory settings again?
Tags: Toshiba
Similar Questions
-
My ID apple has been disabled and I can't restore it because I forgot my security question, please help
I can't update my iphone because it will need for my apple for activation ID. Please help me.
Contact Apple for assistance with the security of the Apple ID - Apple Support accounts
-
Hello, my backup is disabled, and I can't change on how I can change the?
Hello, my backup is disabled, and I can't change on how I can change the?
Exactly what did you do (including all the troubleshooting steps you took) and what exactly happened?
-
I have Windows XP Professional with Service Pack 3. Microsoft does support this system more? I can't to update manually or automatically because auto has been disabled and I can not turn on again.
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058Unexplained computer behavior may be caused by a third-party software
http://support.Microsoft.com/kb/827315You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update
http://support.Microsoft.com/kb/883614
The automatic updates service is missingUpdate Windows in gray - restore (line 179)
http://www.kellys-Korner-XP.com/xp_tweaks.htmAutomatic Updates options are grayed out? :
http://WindowsXP.MVPs.org/aupolicy.htm -
When you try to use windows update I get this error: error number: 0 x 80070424. In addition, automatic updates in Security Center is disabled, and I can't activate it.
Tre,
A KB was created for the error code 0 x 80070424 that appears when you install Microsoft Windows Update/Microsoft Update. The KB includes an automated Microsoft Fix it 50686 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/968002>
Suggest you download and save the fix it.
Then close all open programs and browsers before running MS fix 50686.msi.
`~`
Suggest that you first spread malware as the cause of the problem by following these steps:
(1) have your system scanned by the antivirus/security suite installed.
(2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSShttp://support.Kaspersky.com/viruses/solutions?QID=208280684>
(3) download, install, update and run full scans with two of these tools free anti-malware:MalwareBytes AntiMalware
http://www.Malwarebytes.org/products/malwarebytes_free>
SUPERAntiSpyware
http://SUPERAntiSpyware.com/superantispywarefreevspro.html>
(4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:
http://support.Microsoft.com/kb/310747>
`~`
If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:
How to reset Windows Update http://support.microsoft.com/kb/971058components >
Suggest you download and Save it. Then, close all the open programs and web browsers.
Run Microsoft Fixit 50202.msi and choose its default mode.
After that he finished the race, see if the return code is displayed again when looking for updates.If not, then run the Fixit once more and choose his Aggressive mode.
Restart once it is finished and see if the return code always appears when the updates.IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.
Please let us know if it did or did not help to solve your problem.
If this ANSWER helped, my post as ANSWER of marking close your thread.
06/26 / 1108:34:03
-
I need to disable my Creative Suite license on another computer in order to activate it on a new computer, but the old computer crashed and I can't use it. Is it possible to deactivate the license on the old computer without using it?
you are allowed two facilities, activations, you should may not disable before activating on your new computer.
But if you don't, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html. Ask a county of activation reset.
-
What is SSD and how can I use it or not?
Could someone tell me, what is SSD and how can I use it or not? because my friend told me that my laptop has SSD drive.
Hi Jabbar73,
Thanks for your post, I'm happy to help you.
SSD stands for Solid State Drive. Here's the Wikipedia definition. SSD drive.
Now, for what is in your system go to the Start button and click on run
Type msinfo32 , and go to the section components storage disc.
Lists the disks that you have in your system.
-
I just upgraded my iPad iOS 9.2 and now can't use my Logitech keyboard. What should I do?
I suggest that contact you Logitech to see if they have a update/work around.
Barry
-
THIS IS NUTS! Just bought this computer and two days its been "updated" ALL THE TIME, more than 200 + "updates" so far, rebooting over and over again, this 64-bit running MUCH slower than the old xp AND I CAN NOT USE ANY OF MY OLD SOFTWARE, BAD BAD BAD I now see that I made a HUGE MISTAKE. I am the most unfortunate customer with this pos!
Take it to where you bought it. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I am running XP and I can't use my keyboard and Device Manager is empty.
I am running XP and I can't use my keyboard and Device Manager is empty. I also have problems with my other computer also running XP and it will only start in safe mode. I tried to restore, and when it restarts it still will not start normally. Help, please
Hi margaretbrown,
· What is the number and the model of the computer?
· Also provide the model number brand of na on the keyboard?
· What is the service pack installed?
· Do you remember all the recent changes on the computer before the show?
Try the steps listed in the link below: No. options appear in the Device Manager list when you open it: http://support.microsoft.com/kb/311504
And the computer on which you are unable to start up normally, try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2
With regard to:
Samhrutha G S - Microsoft technical support.
-
I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online. What can I do?
I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online. What can I do?
Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...
-
When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes at the top right corner with the-, square and X are too far to the right to do anything. How can I fit on my screen, so I can use my computer?
Hello
Please contact Microsoft Community.
This problem is limited to any icon or it happens with all?
Did you change to the computer?
I suggest to refer to the following methods and check to see if it helps:
Method 1:
Install the latest display driver and check
Uninstall the driver from Device Manager display.
a. close all programs. This will ensure that the programs do not interfere with the update of the driver.
b. right-click on my computer, and then click Properties. This will bring you from the System Properties menu.c. click Device Manager
d. expand the display column of cards by clicking on them. This will show the graphical current map that is using your computer.
e. right click on the adapter, then select Properties.
f. click on the driver tab. This tab displays information about the current driver, as well as options to update, delete, uninstall, and back the driver.
g. click on uninstall
h. restart the computerYou can install the latest display driver for download on the site of computer manufacturing, same driver will reinstall automatically after the restart, if the computer is connected to the Internet.
Method 2:
I suggest you try the system restore. Restore the system to a restore point when your computer was working fine
You can also check the Device Manager to see if the video card has a yellow exclamation on it with an error any:
http://Windows.Microsoft.com/en-us/Windows7/products/features/device-management
I hope this helps.
Kind regards
Anusha -
Internet and Intranet can be used simultaneously in a PC?
Internet and Intranet can be used simultaneously in a PC? If so please tell us how to do it.
Thanks in advance.In general, an Intranet is a special network to allow remote users to be as a local user on the network of "destination". This is accomplished by implementing a VPN from the PC to the network "destination." It is dependent on the VPN settings and customer connection software.
See Mike's response
-
Hi im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected. What should I do? Thank you
Hello
1. have you checked the problem by plugging the headset to another computer?2. it worked before?3. What are you talking about ""device"is not connected?I suggest you to connect to another computer and check.Also check if the device is compatible with Windows 7.Reference:Windows 7 Compatibility CenterIf it's compatible, perform the methods belowIf it is not compatible, see the following articles:What is program compatibility?
http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsMethod 1: Run the audio Troubleshooter and see if it helps.Open the audio playback troubleshooting utility
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-TroubleshooterMethod 2:Run the Fixit described in the article and perform the steps:No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsSee also:Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problemsI hope this helps. -
I bought two licenses adobe and I can't use them because they are expired, expiring 2017/03. I had this problem and solution still has the air of 15 days!
[Moved from the endorsement, general, all Adobe forums Lounge for a specific product - Mod support forum]
Hi Eugenio,.
It seems to be a problem of implementation.
Try wearing the same query in the General Photoshop Discussion where experts can help you.
Kind regards
Sheena
Maybe you are looking for
-
Thunderbird not store my password of incoming ATT mail
I recently signed to ATT and I have account in Thunderbird, but you bird will not store my PW, I have to type manually whenever I try to retrieve any email att.net . Gmail and Comcast EMail work as adverstised, just ATT.NET is bad conduct.
-
When I click on save link nothing happens
Since upgrading to Firefox 27 (using Windows XP) I can't save a file using Save Link As. When I do, I see the hourglass icon but nothing happens. Similarly, if you are prompted to open a PDF (for example) or save it when I select 'save', nothing happ
-
Digital camera Sony DSC S-80 on USB connection fails
When I connect my camera DSC - S80 on the computer, it does not recognize the camera. If I connect the camera on another computer with Windows XP everything is ok. Who can help
-
I am currently connected with a 'temporary' profile and cannot access my files or programs. I can implement new applications, but the warning message indicates that they will be deleted when I go out. The warning message says wait and try again. Th
-
Miss me my Windows Vista Home Basic Edition games. Spider Solitaire, solitaire, Free Cell, hearts, etc...The files are completely missing...