Satellite L350 - webcam not working not

Similar Questions

• Satellite L350 - Webcam does not work on XP

  I use windows XP on a Satellite L350 PSLD4E but can not do the webcam works.

  No matter what I do to "the creation of the video preview has not. Please check the device connection and make sure that the device is not used by another application or user. »

  I tried the drivers of toshiba for windows 7
  I tried the drivers for Chicony, older and newer
  I tried the drivers for the L300
  I tried using F9 on the BIOS (which stopped from loading windows...)

  I have now run out of ideas.

  Any suggestions?

  Hi briley,.

  > I tried the drivers of toshiba for windows 7
  Usually the Windows 7 drivers are not compatible for XP because the drivers are different and is not compatible.

  According to the site Web of Toshiba, Satellite L350 isn't XP support because there is no drivers for it, but if you are looking for all models (without model number) L350 CANF find you a driver for XP camera wizard.

  Then just download and install this driver, it should work.

• Satellite Z830 - webcam not working not not because upgrade W10

  I have a ultrabook z830 and the webcam is not working since upgrade W10. I tried to install the software of webcam of toshiba and also one that comes with the laptop, but when I try to start it it just says: webcam of initialization failed Please restart the application. I uninstalled and reinstalled several times. The webcam was working fine before W10 upgrade. Can someone tell me please in the correct direction for the drivers of webcam. I tried several unsuccessful.

  See you soon

  Paul

  Message has been modified: subject changed Portege Z830 to Satellite Z830

  Hmmm, someone changed my title for portege z830 instead of the z830 ultrabook

  I don't think my laptop to be a portege

  When I list my part number in the drop-down menus, it shows me that

  Computers
  Ultrabook
  Satellite Z830
  PT22LA - 00T 001

  I can't find the words portege anywhere on my laptop

• Screen on Satellite L350 does not work

  My Satellite L350 laptop shows a white screen.
  After the welcoming text: "Toshiba leading innovation", there is only light on that one a flashing cursor.
  With an external display (Fn + F5) is exactly the same thing: the screen has also only the flashing cursor.

  What can I try?

  Please go to BIOS (F2) to verify if the HARD drive is recognized by the BIOS.
  If the HARD drive is not recognized, then this means that the HARD drive is malfunctioning and needs to be replaced. Otherwise its ok and you will need to install the Windows operating system only

• Satellite L350 does not connect to the internet, network adapter yellow exclamation

  Trying to help my Nan with his laptop...
  Model is Satellite L350-170

  Does not connect to internet, even using the Ethernet cable. Network cards have yellow exclamation marks on it and seems he needs an updated driver. How the hell can I download and update if it does not connect to the internet. And then, what update is necessary, because I searched on here and there is no update driver for network card?

  She had various internet help from its supplier and a visit at home but still no joy. Internet works fine on other devices. Any advice greatly appreciated.

  All the drivers can be downloaded from the Toshiba UE driver page.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose your model of laptop in the form of download and the system that is pre-installed on you unit.
  Then, you will get the list of drivers.

  If you are not able to connect to the internet due to lack of driver LAN/WLan, then you another computer for download.

  You asked how to remove the network card?
  Usually, you need to access the Device Manager (in Control Panel) then we need to expand the area to network adapters and you will find the LAN and WLan card.
  Click the single LED adapter, and then press or click on uninstall button driver

• Re: My Satellite L350 does not recognize USB key

  I have a Toshiba Satellite L350-235. It suddenly stopped recognizing my usb key that I use every day. Normally, he would say "new hardware found" and allow me to click on the F drive, now I get nothing!

  Can someone advise me?

  I guess that the USB ports are working properly if you connect another device; something like USB mouse. Right?

  In my opinion, you should test the USB in USB ports.
  You can also try to remove the USB controllers and hubs from the Device Manager list.
  After restarting of new laptop, (ports) USB controllers must be recognized, and then you could connect and test the USB again.

  In the event that the USB is not recognized by one of the available USB ports, try to connect to another USB key.

• Satellite L350 does not start

  I have a satellite L350 who will not complete the boot process. When I turn on the camera, it will get to the screen that says windows, with the Green scroll bar and that's it. Then my screen turns off.
  When I try safe mode, I get a blue screen with an error message. I went into the bios and change the boot sequence to try to run my recovery disk. When you do this I just get the same black screen.

  Any help would be greatly appreciated

  Hello

  This means that you are not able to reinstall the OS using any disk (disk recovery, Windows XP, Vista or Win 7)?
  The BSOD may be a hardware problem or serious software product, but it looks more like the hardware issue if you're not able to reinstall new OS.

  In this case, the RAM (memory sticks) and the HARD drive must be verified.
  I recommend you to try new memory modules. The HARD drive can be checked by using a tool called Drive Fitness Test which can be downloaded for free from some pages.

  If you don t have right spare modules so I advise to ask a local technician laptop help guys should put new, the work packages and test the laptop.

  Your warranty is valid?
  If so, get in touch with ASP from Toshiba, that might help.

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Satellite L350 - is not connect to the router

  I had a problem with the radio on my Satellite L350. Even if the router is right next to the computer, it is not for her. It can see if I do a search but only says: connection not available. I have 2 other computers works great on the router. The router is a Netgear.

  Any body can help?

  Hello

  What should I say now? First attempt to update the WLAN driver that you find on the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Also, check the TCP/IP settings of the wireless network card. If your router supports DHCP, check if this option is enabled. Also make sure that the DHCP client and DNS work properly.

  You use a firewall? If so try turning it off. Maybe it s blocking of the Internet connection.

  By the way: what OS do you have?

• Satellite L350-171 not available in the United Kingdom

  Hello again!

  Does anyone know why the stock of L350-171 is all this?
  I'm trying to get a replacement from Tesco for mine failed, but Tesco do not know when they will receive the stock.

  Also tried to look away, online sales in the United Kingdom and they all show the laptop as out of stock. I hope that this is not an abandoned product! I tried to call customer service to ask Toshiba but abandoned after 15 minutes on hold: (.)

  Get very itchy to pay for a new gadget but do not record/play with it!

  Thank you

  Hello

  I put t believe this laptop model could be interrupted at the moment.
  The L350 is one of the new series of Sam at the moment and maybe this is the reason why the Satellite L350-171 is not yet available

  Maybe you should wait a bit.

  Welcome them

• Satellite L350 - is not ready CD but DVD

  Hello
  I just signed in

  I have a problem with my Satellite L350. He reads very well to any CD but DVD work.

  Anyone have any ideas?
  Please

  Hello

  Try removing the upper and lower registry filters. So follow this work around:
  http://support.Microsoft.com/kb/314060

  Remove the drive from Device Manager CD/DVD, and then restart the laptop.

  Perhaps that there is dust on the lens and you should try to clean.

• Satellite L350 - Webcam initialization failed

  I'm new here so not sure if I'm posting in the right place.

  I have a Toshiba Satellite L350 (Windows 7) that I bought in January. Everything was fine until the last two weeks when my webcam suddenly stopped working and when I sign in Dungeon getting a webcam of the message initialization failed, please check your device and restart the computer or the camera.

  I went to settings and it says camera works, but it is not. I also have another pop up when I sign saying check Toshiba laptop stopped working (not sure what it is)

  Can anyone help please?

  Thank you
  Jan

  Hi Jan,

  I had the same question as my webcam didn't work and so I reinstalled the driver for the webcam that could solve my problem. You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But I recommend to remove the old version first. Then use CCleaner to clean the registry and then you can install the latest version on the Toshiba site.

  Toshiba laptop recording you can remove from Control Panel > Add/Remove programs.

  Check this box!

• Satellite L500 webcam stopped working

  Hi guys,.

  I obtained through Satellite L500, webcam quality is very bad, especially @night time. But suddenly it stop working while I was on windowLive messenger with Windows 7.
  I tried a few settings but does not work. It shows the light but in window have only a green landscape.

  Could you please someone help me?

  > obtained by Satellite L500, webcam quality is very bad, especially @night times

  Check this Toshiba document on the quality of the webcam:

  + How to change the settings for the built-in webcam If the image is very dark or black +.
  http://APS2.toshiba-tro.de/KB0/HTD9402LC0000R01.htm

  and this one;

  + Bad image quality when using the internal webcam under dark light conditions +.
  http://APS2.toshiba-tro.de/KB0/TSB8A02G80000R01.htm

  Welcome them

• Satellite L350 - pad stopped working after BIOS update

  Hello

  The digital pad stop working after upgrading the bios on a Satellite L350-170 (1.90-online 2.20).

  Any ideas?

  Concerning

  The value of the default BIOS and test it again.
  NUMLOCK button works (LED on / off)?

• Fact my reocvery for Satellite L350-170 drive works fine

  Hello

  I had my 2 discs of recovery for Satellite L350-170 and after putting the first says something about loading the files and the Microsoft bar comes on.
  Now I have a black screen with a cursor white arrow on it.

  Does that mean his work?

  I am a novice to this :(

  And when I will put the second disc in?

  It is barely a month old and stop right on me.
  It has antivirus protection on this issue and very little used.

  I can t he understand.

  Thank you Michelle

  Hello, Michelle

  This means that you have created two DVD-R virgins for the installation of recovery?
  Please, start your laptop and press F12 repeatedly. When the boot menu appears put the first recovery DVD in the optical disc drive in the menu, choose the CD/DVD and start the installation with the button ENTER.

  You can also try to start installation of recovery image stored on the HARD drive.

  If you didn't change anything about this either on the second partition of HARD drive, try it please follow:
  Start your laptop and press F8 immediately several times to enter Advanced Startup Options. If everything is OK the first option, to fix my computer. If this option is available, please choose and run with the button ENTER.

  Then simply follow the menu on the screen and you will enter in the System Recovery Options. The last option should be Toshiba Recovery option. Please use this option to start the recovery image installation.
  As I've written before, this should work if you didn't change the default settings.