Satellite L350D-118 Vista stops working after the error to install Windows XP

I have a L350D - 118 (PSLE8E) bought 2 weeks ago and is installed in Dutch.
My plan was to make it dual boot with Windows XP Professional.

I resized C: partition using the Vista Disk Manager to make more room for the XP partition.
I then tried to create a new primary partition, but I only could make an extended partition (so I did not).

Then I put in my teacher XP + SP2 installation CD in the disc drive to see if I could install XP on a new partition to be created using the installation program itself. But the XP installation program fails before the installation starts with a message that an error has occurred and not further so that he could cause damage (the bottom line: stop: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000).)

When I rebooted, Vista has not loaded, but there is only a flashing cursor in the upper left corner of the screen. X (there is that no message as not found operating system, or something like that.
When I press on and/or press and hold F8 while loading the Bios, the same thing.
The laptop is also transformed the immediately after pressing the power on button, instead of having to wait 4 seconds.

Then I inserted the DVD of Vista Premium x 32 I have from my PC. This displays a message, press any key to boot from the CD/DVD... If I press a key, there is a bar "loading files" style back and after a loading bar Vista-style. After that, it still displays a flashing cursor in the upper left corner of the screen.
When I retried with pressing F8 and select last known good configuration, it blocks the same way.
When I retried with safe mode, the screen freezes after Loaded: \windows\system32\drivers\disk.sys

I also tried the Windows XP edition family, and Windows XP Edition - family + SP2, but all abandoned and gave the same error message.

I tried to start with the prompt with a CD of Windows 98 SE. It works, but it can not find the drivers for the DVD-disc drive and since W98 doesn't support NTFS I don't see what is on the C: partition. :-(

I did a recovery DVD because it is already on the D: partition and I do not plan on using Vista.
There was also a non dos partition of 1.5 GB at the beginning of your hard drive. This is mentioned in the guide of the 3-8 regarding the system recovery options.

Is there another way to take a look at the C:-partiton or get HARD drive recovery tool work?

If you say that the [http://backupmedia.toshiba.eu] Toshiba Recovery DVD, how did you it will work. ?:|

Thanks for any advice.

Hello

I must say that your ad is very interesting and dual boot is a topic where people can write about experiences.
Last month, I did my own experiences and want to share with you.
At first, I must say that your ad is a little confusing. Let's start with General things.

Dual boot (installation of two BONES) is without any doubt, and I see no problem here.
It is just important to have two partitions on the HARD disk. If you have preinstalled in C that you want to use in the future or create one with disk manager or just start the installation of the OS and the Windows installation to create the second partition.

If your laptop has two hard disks, you can also install the second partition on the first partition, which belongs to the second HARD drive.

With short words, all options are open and it's just important to know what you want to do exactly. If I understand you right, you cannot boot OS preinstalled.

The problem is that after having playing with partitions, you will not be able to use the saved on the HARD drive recovery image. This score from GB 1.5 has nothing to do with the recovery image, and it is characteristic of Vista. If everything is OK, you can enter if you F * to start and choose the first option called fix my computer.

You can see this option after using F8 at startup?

I really don't understand why you have this error message when you start installation of WXP. What you can do is to set the default BIOS settings and try again.

If you order the Toshiba Recovery DVD, you will be able to reinstall the OS and have once again the factory settings. Maybe you should buy it. OK, it costs about 40 Euros, but this isn't a bad idea to have the original recovery DVD. Perhaps one day you want to use Vista or you want to sell your laptop. It's good if you can also offer original recovery with her media.

Sorry if I forgot to comment on something in your ad. If you have any questions please let me know.

Good luck!

Tags: Toshiba

Similar Questions

  • Aero stopped working after the last update of windows (platform update for windows 7)

    The day after this update my aero stopped working and when I troubleshoot-made the mistake was Manager of DWM is disabled but the service is started. I can not it works using the tips found in the support documents. Help, please.

    I think this will help you:

  • My guest user account has stopped working after the installation of several windows and IE9 updates.

    I recently installed several windows and IE9 updates. During the install IE9 I stopped the installation process, because it seemed that I had two IE9 installs go. I ended up cancelling the installation so IE9 has not installed. I tried to install IE9 again and this time I can't stop installation, and it has been successful. I checked the other user profiles to make sure that everything has been installed, and that's when I noticed that my guest account wasn't just all users accounts were working well.

    Whenever I try to open a program, for example: Internet explore, any Office program and even the calculator another window opens asking me to manually locate the file I'm looking for. I am able to locate the file and open it, but as soon as I close I can't reopen unless I have to manually search for the file. There is a checkbox indicating that it automatically uses this file with the program but I can't check the box (its in a light gray that I can't click on) and I don't want to manually search the file everytime I open a program. I tried using a restore point before updates, but which did not set can guest account everyone please help?

    [1] I need to correct me by declaring that the Mcafee subscription is 18 months and its due for renewal in June, then yes its still the preinstalled version.

    [2] will certainly be your advice on that. Should what drivers I roll back?

    [3] I thought to go on this forum first, but I chose it because the error occurred while I was updating, but I'll post my question it too

    A1A. Ah! The application is named McAfee Security Center by chance?

    A1B. Do you plan to purchase a subscription for this or any other McAfee application (which you would need to do so BEFORE the expiry of 18 months 'advance')?

    A2. In re the restore drivers, you restore the drivers that you have installed via Windows Update. that is, Intel G45/G43 Express Chipset (graphics driver or screen) and Realtek PCIe GBE Family Controller (NIC driver). Again, this is a long shot.

    A3. Please do that start new thread immediately.

  • Satellite L350D - WLAN does not work after the recovery disk

    Hello

    I just got a L350D. I ran the tool recovery disk, without any other program running. It is on a good way to end the second disc and that: BAM! blue screen. Since start-up, my LAN and WLAN does not work.

    He always says ' WLAN 2.0 bg adapter "to which no driver is found. The driver is a Realtek WLAN and LAN.

    Don't you think that the crash of the WLAN and LAN module fails?

    I tried the things:

    System reset
    Reinstalling the driver

    but nothing has worked.

    Someone at - it advice?

    Thank you very much!

    Mycale

    Hello!

    I put t know what is the reason for this BSOD when installing, but you can post the BSOD code? For example, you can search based on Microsoft Knowledge for this code.

    In addition, I would try to update the BIOS of your laptop that you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    After you have updated the BIOS to try to update the WLAN and LAN card driver, or try to reinstall Windows using the Toshiba recovery disc.

    Good bye

  • Serienumbers of activation CS6 master collection and first and Photoshop elements do not work after the update own install windows 10

    Hello

    I recently updated my Windows 10 computer with clean install. I want to install all my software again, but I'm not able to install all my products from adobe. When I try to enter in the serienumber it is said that this is not a valid number. Would it be possible that because I already installed it on my previous version of windows I get this error now? And what is the solution to this?

    And is it not a little ridiculous that you can't perform a clean install and reinstall your purchased software?

    Thanks for the help!

    Best regards

    Sylvain Wielkens

    An idea that MAY work to install or run some programs in Windows old 10

    -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  • Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

    Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

    I tried to reset firefox and search for similar problems, unfortunately found nothing.

    It is also weird empty space before the address in the address bar

    other extensions and addons seems to work very well.

    Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

    • CTRL + SHIFT + a
    • "3-bar" menu button (or tools) > Add-ons

    In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

    Any difference?

    Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

  • USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP

    Hello

    Model: Toshiba L30-105 PSL33E-02S02HFR.
    USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.

    Thanks for any help,

    Camellia,

    Have you installed Win XP all service packs?
    SP2 provides some patches on the USB feature.

    You definitely need to update the Win XP OS

  • Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

    Hello

    I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

    Please send me some suggentions how to solve this problem.

    Thank you [email protected]

    Hello

    How did you notice this problem? You get an error message or something else?

    It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Install the latest version and try again.

    By the way: you run factory settings or you have installed your own version of Windows?

    Welcome them

  • HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP

    I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!

    Hello @MAlex_B,

    Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

    I understand that you have a problem with the display and wanted to help you!  I see only after an update, the external monitor no longer works.

    Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state?  If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly?  You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca

    Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

    Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

    After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

    After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

    I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

    I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

    The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

    Any help / suggestions would be greatly appreciated.

    Thanks for the reply.

    Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

    https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

    In the future if you have problems with Windows. Not to contact us. We will be happy to help you.

  • All browsers stop working after the automatic updates

    * Original title: Windows 8 - all browsers stop working after update

    Hi, I have a Dell 14R with Windows 8, standard configuration.  After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website.  Home page only on a browser worked.  Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem.   Then I disabled the updates for windows, just in case.  Did you anyone has a similar experience lately and was able to locate and solved the problem?

    I've updated for Windows 8.1 over the weekend, it seems to work great so far.

  • My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

    When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

    Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

    I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

    Hi ChristineKrause,
     

    Here are some links that might help you:

    Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

    Advanced troubleshooting tips for General USB for Windows XP problems

    Try the steps listed in the items mentioned above and see if that helps you solve the problem.

  • My bi-ecrans Setup has stopped working with the latest update of Windows

    My bi-ecrans Setup has stopped working since the last windows update.  The second screen is relegated to never turn on and in the part 'View' of the Control Panel, I can't change the 2nd monitor resolution of anything in addition to 480 x 640.  I installed the latest drivers for the video card and two monitors.  I have everything down, powered, entretienavec left for a few minutes and fed up, nothing.  It has been like that for a few days now.  Any advice would be very useful,

    Thank you

    Tyler

    Details:

    PC: HP Compaq 8200 Elite

    Graphics card: AMD Radeon HD 6500 Series

    First monitor: ViewSonic 2030

    Second monitor: Dell 1908FP

    All pilots are underway according to Dell, ViewSonic, AMD and Microsoft.

    Latest patches from Windows Update killed my dual Setup monitor:

    Update of security for Microsoft Office PowerPoint 2007 (KB2596764)

    A security update cumulative for the stop bits ActiveX for Windows 7 for x 64-based systems (KB2618451)

    X 64-December Windows malicious software removal tool (KB890830) 2011

    Update security for Windows 7 for x 64-based systems (KB2620712)

    Update of security for Microsoft Office PowerPoint 2007 (KB2596912)

    Update for Microsoft Office Excel 2007 (KB2596596)

    Update of security for Microsoft Office Publisher 2007 (KB2596705)

    Update of security suites for Microsoft Office 2007 (KB2596785)

    Cumulative Security Update for Internet Explorer 9 for Windows 7 for x 64-based systems (KB2618444)

    Updated for suites Microsoft Office 2007 (KB2596651)

    Update security for Windows 7 for x 64-based systems (KB2639417)

    Updated for suites Microsoft Office 2007 (KB2596789)

    Update security for Windows 7 for x 64-based systems (KB2619339)

    Update for Windows 7 for x 64-based systems (KB2633952)

    There is no update stated in your post which could have implications on your graphics card, or its driver.

    Have you installed the latest graphic driver AMD in the AMD site?

    http://sites.AMD.com/us/game/downloads/pages/radeon_win7-32.aspx

    NB this link is the 32-bit win7 driver.

  • Satellite A300 - some keys stopped working after downgrde from Vista to XP

    Hello

    Excuse me for my bad English. I have a problem with my Satellite A 300 PSAG4E-0450. Operating system went from Vista to XP. Easy keys, keys shortcut and illumination stopped working. All the drivers have been downloaded. I tried to find it in Control Panel-> Toshiba controls. I changed to bright power, but this isn't work. If I try to turn it off, I see a window with "choose order".

    What can be wrong?
    Thanks for your help.

    Hello!

    As far as I know, the lighting can be disabled and enabled in the BIOS.
    Check it!

    To shortcut keys, you should try to install the Toshiba controls and utilities hotkey.
    From Toshiba Web site: http://eu.computers.toshiba-europe.com

    I hope it's useful for you.

    Good bye

  • DNS stopped working after the latest Vista updates

    Yesterday my Vista Home Premium has been updated by Microsoft through the automatic update process. After the update and reboot network stopped working. I was able to trace this DNS no longer works. I was unable to solve the problem until I supported updates, after which the system returns to normal operation.

    Now, of course, updates want to be reinstalled, but I don't want the network to fail again. Any ideas?

    Change how to get updates:

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Understand the Extras in Windows Vista and Windows Update info is at the link above.

    Right click on those you don't need > UAC prompt > it hide.

    Never install party hardware driver updates 3rd through Windows updates.

    Go to the manufacturer's website, instead.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for