Satellite L350D-21 problems using new HARD drive recovery recovery disks

Similar Questions

• New hard drive - recovery disks

  Hello

  I have a HP Pavilion dv6-3230us running windows 7(64 bit). I was thinking of upgrading my hard drive to an SSD and I was wondering if I could use recovery discs to reinstall Windows 7 and all drivers. I have a new copy of Windows 7 Professional I could use and went to the site of HP driver but don't know what all that I have to download to get everything to work. I saw that there is an option to order recovery media and I was wondering if that would do the same and bring the computer back as the first day I bought it without having to use my copy of Windows 7 Pro me.

  Thank you

  Hello:

  Unless you buy the same size (in GB) SSD, as your original hard drive, recovery disks do not work.

  What I suggest to users in your situation is the following:

  Copy the your C:\ drive SWSetup folder to a portable storage device.  Take a look here because it should contain all the program and driver installation files to install on your PC. Some of the installation of the program files will not be considered on the assumption of your laptop and driver page.

  If you have trouble finding drivers, just click on all devices that appear in the device with a little yellow Manager! mark.

  Then after material ID for them, and we can let you know that you need to install drivers.

  If you don't know how to find the hardware device ID, please read the info at the link below.

  http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device

  If you don't want to lose your windows 7 license pro on your PC, you can make your own drive of W7 premium family if you can read the product key of MS 25 characters on the bottom of your PC.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Satellite L350D - 213 Desktop gel after HARD drive recovery

  Hello

  I'm trying to help a damsel in distress. Its Satellite L350D-213 would not start. Although I could boot mode safe, that's all I could do. I tried to save all its data, but could not do it anymore. I did a HARD drive recovery and everything seems OK until I started as usual, but when I tried to open programs and they did not open. Finally, I called for a Shut Down. It took more than 10 minutes.

  I restarted in Mode safe mode and tried to open the pre installed on the desktop programs and there seems to be no problem. Closing together took 13 seconds.

  Tried rebooting as normal and the same problem occurred.

  I just feel that one of the system files is corrupted. More likely I'm wrong, so is there anyone out there that can advise?

  Thank you

  Stokkers

  It is not easy to say what the problem is here. The programs that you try to start?
  Corrupted files? I don t think so. You have installed the own recovery image and if there is a corrupted file even should arrive as soon as the first day.

  Start your laptop and enter the BIOS settings, set the default value and reinstall the recovery image.
  Configure Windows and wait for the operating system to start successfully. Don t connect the laptop to the internet and check again. Don t connect some external devices.
  What you can try is to open the Task Manager and see if there is a background activity which needs a lot of CPU usage. You can try to stop it.
  You can try to disable some applications at startup.

  Play a little with it.
  There must be a logical explanation why this happens.

• Satellite A50 432 - installation on a new HARD drive recovery DVDs

  I have an A50-432 and the HARD drive has failed. I was able to install the DVD of recovery on the old HARD drive using the Q: drive prompt. But when the new HARD drive is installed it does not recognize the new HARD drive as a destination.

  How can I install a new HARD drive recovery DVD?

  Hello!

  Have you checked the BIOS if the new HARD drive is recognized properly?
  Maybe the new drive HARD isn t working properly and if the BIOS doesn't recognize it. Then you are also not able to install the disc of recovery on this subject.

  Normally, you only have to boot from the recovery disc and follow the instructions on the screen. All that s.

  Good bye

• Satellite C650 - reinstall with the new hard drive

  Hello

  The hard drive in my C650 just died so I put in a replacement, and the problem I have is that I never create a recovery disc for my laptop.

  I tried to use the windows disk 7 I got with my desktop, but when I boot it I get the error ' A required CD/DVD drive driver is missing. If you have a flash driver diskette drive, CD, DVD or USB, please insert now. ".

  So, I downloaded the driver for chipset support page and excerpts to a flash drive. The installation detects these drivers "ICH9" on my USB, but after loading them, I always get an error ' no new deices could be found. Make sure that the driver files are correct and located on the driver installation media. ».

  I checked the bios and the new hard drive is detected without a doubt.
  Is there anything else I can do, short of ordering toshiba recovery disks?

  Thank you!

  Hello

  The message
  > ' Required the reader driver CD/DVD is missing. If you have a flash driver diskette drive, CD, DVD or USB, please insert now. ".
  say that your CD/DVD drive is not detected.
  So you need to check if the BIOS so the CD/DVD drive is listed. It should appear on the first page of the BIOS.

  If you want to boot from the disk and then switch on and you press F12.
  Usually, a menu should appear that allows you to choose the ODD (CD/DVD)
  Choose this option and try to boot from the CD.

• Activation problem with new hard drive on another computer.

  When I upgraded to Win 8 on my pc, I decided to install my copy of Win7 on my computer laptop girls as well as an upgraded HARD drive. As we had all two Dell Inspiron Laptops and his laptop was in use, I installed the new HARD drive in my laptop and proceeded to the installation and updates at my ease.

  I made the mistake to activate the Windows 7 successfully while the new HARD drive in my laptop.
  My problem is when I mount the HARD drive in my Dell laptop, it took re activation of girls and he does not accept the key.
  Can anyone help?
  Thank you, Simon
   
  Original title: the woes of Activation

  14 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  You can purchase a license upgrade and convert the license for use on the new system:

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Microsoft Windows 7 Ultimate - full version

  Full version - Microsoft Windows 7 Professional

  Version upgrade - Microsoft Windows 7 Professional Upgrade

  Version upgrade - Microsoft Windows 7 Ultimate Upgrade

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)

  When you get the license for the corresponding edition, follow these steps:

  Press Windows key + R

  Type: slui.exe 3

  Press enter

  Enter the new product key, and then click next to activate via the Internet.

• Satellite Pro A60 and a new HARD drive

  I installed a new hard drive on my notebook and I can't launch Win XP pro or Win 98.
  During the sequence of booting with XP, I get the error message:
  Initializing device NDIS:
  WINDOWS PROTECTION ERROR.
  I checked my bios settings, there are only two
  [HARD DISK MODE = Enhanced IDE (normal) and (standard), I have tried both to no success.]
  I can run 98 in safe mode, but when I use this mode I can access my DVD - ROM is more.

  Hello

  Please check this link http://support.intel.com/support/motherboards/desktop/sb/cs-008712.htm.
  In my opinion, you should try to preinstall the device using recovery DVDs.

  Good bye

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• Operating system on the new hard drive recovery

  Hello

  The hard drive of my Satellite 1900 303 hangs almost (SMART), and the warranty has expired.
  Can I put a new hard drive in it and use the old recovery DVDs to put Windows XP on it? (I suspect it works only on the original hard drive)

  Thanks in advance,
  Randy

  Hi Randy

  You can do it. Features of the different operating system Toshiba tools don t depend on HARD drive.

  Change the HARD drive and install the OS using the Toshiba Recovery CD. This will work. If you have any problems please write again.

  Good luck!

• Satellite T130 - failed to restart after HARD drive recovery

  Hello

  I used the Toshiba HDD Recovery tool for reinstall windows 7 on a recovery partition. Everything went well until the end when the pc restarted and would not restart. So now that I'm stuck, I can't access f8 more.

  Any suggestion?

  Thank you

  Andrea love

  Hello

  And what exactly is happening now? You have a black screen?

  To me that sounds like it, something goes wrong in the installation of HARD drive recovery then I recommend reinstall Windows again since the middle of recovery that you created on USB or external CD/DVD drive. This can restore Windows again.

  Theoretically, it could also be a hardware problem but I would try the middle of recovery recovery facility that s my personal opinion. ;)

• Satellite L650-11F - how to access HARD drive recovery?

  Hello!

  I have a Toshiba Satellite L650-11F.

  The other day I had a huge massive Goner virus (lol) and the computer is turned off. Whenever I tried to turn it on, it started to load Windows, and then restart. I tried to start Windows in safe mode but the same thing happened, just keep restarting. I tried to repair Windows (by pressing f8 and etc.) and without success, he kept restarting.

  So I tried to put it because it came from fabric and when I press 0 or F1 happears just 2 options: choose an opperating system to start or press tab to select a tool: Windows 7 tools: Windows memory diagnostic

  Can you help me please? Is there another way I can access the hidden hard drive recovery partition? Please :(

  Hi dakova,.

  Ist it Toshiba's original OS is still installed? I ask this question because it of necessary for the recovery of HARD drive. If you have installed another OS, you can access t HARD drive recovery option.
  In addition, recovery of HARD drive option is available if you press the F8 key before Windows starts. In the advanced boot menu, select fix my computer. The exact procedure is described here:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  Alternative, you can take the Toshiba recovery disc. This will also restore the original settings. :)

• M7-j010dx: need help w/Windows 8 new hard drive recovery

  installed a new hard drive installed (hard drive error (3f0) an old and dead confirmed by Geek Squad). I have HP recovery discs. How to proceed from here?  Tried the road "equip App and driver recovery disk and turn on. found no go and same "Boot device. Please install the operating system on your hard drive.  hard drive error (3f0). "appears.

  Is there more to the process than that? I don't get what is happening.

  Thanks in advance...

  Something that has worked for many (not all) Windows 8 laptops_enter BIOS and change the date to 01/01/2014. Save & Exit and restart again recovery disc. They pass through the process_but - on the first restart that launches Recovery enter BIOS to verify the date is still 01/01/2014. If so go back to reset. If not change again once and then resume.

• Re: Satellite U300-11V. This new HARD drive I can use?

  Hello everyone, I want to change my toshiba with a larger internal hard drive.
  I was wondering if someone might give me a few pointers on the exact dimensions, that I should be looking to buy a replacement drive

  THX
  r

  Hello

  I think you can use a 500 GB SATA 2.5 HARD disk
  Because it s a controller SATA SATA 2.5 hard drives available all should work fine.

  See you soon

• Recovery on satellite Pro C660 - 2KM with new HARD drive with the restored recovery partition

  Hey people,
  I had a problem with a virus on this sat pro, so I decided to completely erase the hard drive to get rid of this virus. Before I did, I saved everything partiton D including the recovery path and after clearing course, I copied everything returns to a place (second partition).
  Now, try to recover and do not know how to do it. F11, F10 and F8 seems to not work. Do I need the recovery media created with recovery media creator or can I still use the recovery on the new partition D: path?
  Thanks for your help in advance,
  Stefan

  Unfortunately, recovery doesn't work on this path.
  What you need now is the recovery disk.
  In general the recovery image on the second partition is useless and you will not be able to start.

• Strange problem using cloned hard drive - Equium L20

  I recently cloned the 40 GB Toshiba hard drive in my Equium L20. Boot from the new drive everything starts fine, but for some reason, I can't the LAN or wireless to work!

  For example, to view the settings on the wireless generally show a window with 3 tabs, one for services, one for authentication and one for the firewall (I am running XP here). But on the new disc hard, I see two tabs, the Authentication tab is missing. Looking at the Device Manager on the original hard drive - I have two devices as expected, LAN and Wireless, but on the cloned drive here? loads, including loads of trend Miniport drivers too.

  It's like something has not just copied, and I don't know where to start!

  Hello

  I m not an expert on this subject.
  But who knows? Maybe you have cloned the drive properly!
  It really seems like you did something wrong.

  How do you clone HARD drive?

  In my case, I only create an image of a partition C. This partition has been saved as an image .gho file.
  I can always use this file and can restore my C partition on each new HARD disk that is installed in my notebook.
  and everything works smoothly!