Satellite L350D - cannot install Vista

Similar Questions

• Satellite L350 - cannot install Vista and how can I backup my data?

  Hi all

  I have a Satellite L350 and recently I installed Vista Home Premium in another language (the OEM Vista was in English) in the hope I could activate it with the OEM key, but I did not.

  When I tried to re - install the Vista OEM of WinRE I realized I can't access it, and then I got a "brilliant" idea that will format the C partition with Acronis Disk Director he could boot to WinRE. There can be no.

  Fortunately, I have burned before recovery disks. The only problem is that the whole HARD disc recovery disc formats and I have data on the second partition that I would like to recover.

  I tried to install Vista retail again to save the data of the second partition (Yes, I'm a fool, I did not before) but it stops after the first reboot. I get a black screen with an underscore will blink.

  I really need that data, please help!

  Hello!

  I can tell you why you can t install a version of Vista with product key. It's pretty easy because the button on the lower side on the laptop belongs to the preinstalled OEM version and t can be used by a commercial version.

  However, I think the best way to back up your data would be that you put the HARD drive in an external HARD drive enclosure, and then you can back up your data on another PC or laptop.
  These cases of disc HARD external are cheap but very useful.

  Good bye

• Satellite P200D - cannot install Vista SP1

  I tried times serval update to Service Pack 1 of Vista. After that time of serval downloads, laptop installs Service Pack 1. After that serval hours windows update gives an answer that update is not possible with a message that is not explained by Windows.

  What is the problem with the update?

  Hello

  If you cannot update the SP1 then your Vista is confused upward or SP1 is already installed.

  How have you tried to update the SP1? Have you downloaded it from the MS page made one then you perform the update or have you used the Windows Update option in the Panel?

  In your case, I recommend to check first if SP1 is installed.
  If it was not installed, then rub the BONE using the free CCLeaner tool.

  If you want to update the SP1 version, and then try again.

  If that does not help then retrieve the operating system using the Toshiba drive and then try to upgrade Vista to the last State.

  Good bye

• Satellite L300 - cannot install Vista - HARD drive not detected

  My laptop model is Satellite L300. Model No.: PSLB0E-06U01HAR.

  I am facing problem with Windows Vista Home Basic.
  In the middle of the instalation, it does not detect the hard drive.
  Its shows me the error that is your hard drive erased or not connected the power cable.

  But I installed the operating system like UBUNTU successfully opened.

  Let me know how to solve this problem.

  Thank you

  Did you include the SATA driver?
  If this is not the case, this could be the reason why the HARD drive is not detected.

  However, you can disable the AHCI in the BIOS and it could spend in compatible mode. In this case the SATA driver is not important

• Re: Satellite L350D - cannot install the driver for the webcam

  I downloaded the driver for the webcam TWebCamera and the icon will now appear in the Windows Start menu. When I try to launch it I get the message that the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. Behind this message, there is another saying that the question is not available, you want that it removed from the list?

  When I try to run the tool from sxstrace flashes a message that disappears momentarily.

  I don't know where to see the event log.

  Hi donal.ocallaghan,

  There is already another thread on the same error message:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=62954

  The event log you can find in Control Panel > system and security > administrative tools > event viewer. For each error, you get a detailed report. Check this report and follow the instructions.

  By the way: you try a webcam driver update or what exactly?

• Cannot install vista SP2. Go back to step 3 of 3 error E_FAIL (0x80004005)"?

  original title: cannot install vista SP2. Resets the return on step 3 of 3.

  I tried to install SP2 for vista, it fails. automatic update failed he proceeds to step 3 of 3 and go back. I tried the manual download, that there is too much. He is gone to step 3 3 100% and then looked back. has given an E_FAIL (0x80004005) error code please help because I can not install msn live messenger without SP2.  I have Service Pack 1 installed.

  IAM running windows Vista 32 bit, home premium.

  Try these institutions.

  http://support.Microsoft.com/kb/971204/

  http://support.Microsoft.com/kb/313222

  Go to control panel-> Windows Update control, click "Edit settings", then select "Allow all users to install updates on this computer" and click OK. Restart, then install SP2.

• Satellite Pro M70-113: cannot install Vista graphics driver and lines appears on the display

  Hello

  I have satellite pro m70-113 with ati x 700 graphics card.

  When I installed vista, he installed the default drivers for the x 700 'mobility radeon x 700-microsft Corp.-WDDM '.

  I've updated the display drivers for vista, that released by toshiba 2 days back... but the driver is not updated to the latest version, only the catalyst control center is installed when I ran the update of the driver of toshiba.

  The problem is that whenever I put my laptop in standby or hibernation and resume... the screen shows thin lines vertical/horizontal... and I can't use the laptop... and I have to still put the system to sleep, just to hope that it is not blocking the screen this time...

  This problem is 25% of the time only when resume...

  This problem is not resolved by the update driver for toshiba has released a few days back... as is not installs the drivers (I can't even install the drivers with the option "update drivers" of Device Manager and select file driver update from toshiba.) It says windows find new driver, but could not install the driver... Contact the manufacturer...)

  This snap shows the problem... : http://img360.imageshack.us/img360/2783/12042007366copyod1.jpg

  I updated the driver from an earlier version of catalyst, as it is downloaded from the ati site before that toshiba has released the update... this time it updates some 8. XXX version but the screen problem remains...

  Second, this update of the driver leaves me not sleep my system... the process starts for a sleep, but go back to the locked screen without making sleep ever... so I have no choice to get stuck with the default Windows... drivers having only the problem of the screen... and not the problem of sleep...

  Anyone here with a solution?

  Thank you.

  Hello

  I have Satellite M70-159 and I noticed the same thing several times. For most Vista works well but I don't remember cases in which the described problem occurs. I was just curious on M70 Vista and have had no time to intensive testing.

  Anyway, it will be interesting to know if you have already updated the BIOS to the latest version 5.10. If this is not the case to do this and watch carefully if the problem persists.

• Satellite L300 PSLB0E - cannot install Vista and Win XP

  Hello

  I have a L300, model number PSLB0E sat. \
  It was originally loaded with vista home premium, but it starts now not at all.
  I made a disc of vista Home premium and the number to go with it, but it gets as far as "windows installation" but then it stops.

  I tried to new hard drive, same loading XP pro not working!
  I think it's Bios, but after the download from Toshiba on this PC and transfer it to a memory stick, my laptop can't see it?

  Please can someone point me in the right direction?

  A big thank you in advance Paul

  Hi mate

  Please check in the BIOS if the disc is visible.
  If so, then set compatible SATA to AHCI mode and then try to boot from the Vista or Win XP disc.

  But if the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and so you cannot install the operating system.

  Check it!

• Satellite L550 - cannot install the display driver for Vista 64 bit

  Hello

  I have a problem with my L550. The display driver does not work after installing Vista Ultimate 64. What can I do? I launched the driverpakage from the Toshiba site. It has been extracted, but after this procedure,... nothing!

  There is only the standard VGA graphik installed in the configuration.

  Thank you!!

  Hello!

  Did you start the file setup.exe after extraction of the files?
  Go to the directory where the drivers were extracted and run the Setup file. Follow the instructions on the screen and after reboot, the drivers must be installed.

  Check it!

• Re: Satellite A350 - cannot activate Vista

  Hello world

  I have a problem and hope someone can help me.

  After two years I had to reinstall my computer laptop satellite with windows vista. Here's the problem that the productkey is not readable. So I used a little program (productkey86.exe) out of the registry. So far so good. So I installed vista with this productkey but now my computer is telling me that I need to activate. When I try to activate microsoft says: impossible to activate the product.

  Does anyone know what I need to do?

  Hope to hear from you soon...

  THX

  Edwin

  Hey,.

  The problem is that the key on the lower side is an OEM license key and doesn t work with normal Vista installation diskettes. So that s the problem why you can t activate your Vista installation.

  You wrote that you have a Vista installation disc. Why you n t use the key that belongs to this disc? This would work ;)

• Cannot install Vista Business on Portege M400 - IDE issues

  Hi guys... I am looking for your help.

  I downloaded all the new Vista drivers avaiable from Toshiba in support of the new installation of Vista business on my old Portege M400, that came preloaded with a version of XP Tablet and kept their loan on a CD.

  I also upgraded the version of the ACPI BIOS to the latest available 3.80.

  I insert the first CD of Vista professional and do a boot. (I also have a n upgrade Vista Business CD but I want to do a clean install).
  I go past the first steps and choose Install.
  I am faced with an error message "no disk has been found. "Click on load a driver to provide a device for installing mass storage.

  Looks like Vista is not able to see the IDE drive to the edge and it's a driver problem.

  I touched the "Rescan" button available on the windows installation and another message appears: "no device drivers were found. Make sure that the installation media contains the correct driver, and then click OK. »

  Currently loaded on the XP: currently loaded poster IDE ATA/ATAPI controllers like Device Manager: "Intel (R) 82801 G (ICH7 Family) Ultra ATA Storage Controllers and primary IDE channel."

  Hard drives shown are: Toshiba RAID SCSI Disk Device LD0

  Pls tell, what new drivers since available downloads of drivers Vista for my model 400 ML PPM40E, should I choose here for my Vista installation recognizes the disk available?

  Hello

  It is very easy to solve this problem.
  If you would look on the page of the European driver Toshiba (Portege M400 section), then you will notice that a RAID driver is available for this model of laptop.

  Impossible to install Vista because it cannot find the HARD drive due to lack of RAID driver!

  You must install the RAID driver first and then you can proceed with the installation of Vista.
  As far as I know the Vista installation accepting the USB flash key you can use this key to include the RAID driver.

  Hope I could give some useful advice.

  Cheers mate

• Dead by Satellite L350D after installing Win7

  Hello

  Sorry if this has been asked before - I had a quick glance is a big big forum...

  My Tosh Satellite L350D worked very well but had Vista OS (everything is said!)

  I ran a disc to upgrade to Windows 7 (32 bit) everything seems to be okay. After installation, the first thing I did was visit the Toshiba support for the graphics driver that I found, unpacked and loaded.

  At the end of installation, I was invited to reboot (it would be the first restart of the Win7 installation).

  He stops and died. The power light lights up but no disks don't spin up, no screen, no fan, nothing. I can stick to my ear, but nothing makes a sound.

  I can put in an operating system recovery disc (known to be good) and it runs briefly for a few seconds, but that's all.

  All I can think is somehow I killed the BIOS - any ideas how I can get this person?

  Thank you

  It's really stupid situation now. All you did was just and I can't imagine that the display driver Toshiba killed BIOS even if the symptoms are the same when the BIOS is damaged.

  Please do that Akuma wrote and post comments.

• Satellite A210 - cannot install common module and driver display

  Just down to XP, downloaded drivers from toshiba and the installation was completed with an error not saying no driver found for my hardware. That's happened with the common Module and ATI Display Driver.

  I mean, I need em both!

  Help!

  Hello

  I checked the page European driver of Toshiba and it seems that XP drivers have not been to this A210 series!

  I think that you just tired to install common Modules is not supported on this laptop.
  That is one reason why you can not install it.

  With regard to the display driver.
  Try to install the drivers for the laptop models:
  PSAEJE satellite A210
  Equium A300D PSAK2E
  Equium L350D PSLE2E
  Satellite P200 PSPBLE
  Satellite L350D PSLE0E
  Satrellite L300D PSLC0E

  In my opinion, one of the pilots freed from these series should run.

• Satellite P200 - cannot install XP due to lack of HARD drive

  Hello...

  I have the Toshiba Satellite P200, with Windows Vista home edition.
  I want to remove and install win XP but I have the problem;
  I can t install windows xp. I have this message: Setup doesn't detect any hard disk...

  A friend tell me what s due to the update of the Bios, but I can t solve the problem

  Please help me

  Thank you

  Hello

  First of all you shouldn't t believe everything say this as some computer beginners.
  It s NOT a BIOS issue.

  Your HARD drive is not visible during the installation of Win XP because the SATA driver was not included!
  The laptop supports the SATA controller and a SATA driver must be included in Win XP to recognize the HARD drive!

  But I don t want to write the whole story again that this issue has been addressed 1000 times here in the forum. I recommend this forum a little bit and search for similar topics regarding the installation of Win XP.

  A hint; Intel Storage Manager contains the SATA driver ;)

• Can satellite M300 - I install Vista 64-bit?

  I have a Satellite phone, M300. Memory 4GB Centrino2 P8400 processor.
  Can I install Vista 64 bit on my laptop?

  Why not?

  Laptop computer s hardware components are strong enough to ensure good performance, even using the Vista operating system.

  The M300 Satellite seems to be an Australian series for Toshiba laptop.
  On the page of the Australian driver Toshiba, I could find drivers for 64 bit Vista for a Satellite M300
  http://www.ISD.Toshiba.com.au

  I think that it shouldn't be a problem to get the Vista 64 bit running on this laptop ;)