Satellite L350D - Setup Wizard and not installed corectly

Similar Questions

• Satellite M100 - Ethernet controller is not installed

  Satellite M100 ethernet controller is not installed.
  While I downloaded all the fron driver this site and installed.

  The location of the device is on the bus PCI, Unit 8
  The 28 iic error code.

  The problem he 3 drivers is provided by this page European driver of Toshiba Satellite M100 series!

  Please choose the right and install the LAN driver because the Ethernet controller seems to be the LAN (maybe a WLan too)

  Good bye

• my computer no longer has the CD-ROM or DVD in the system and the wizard it not install them

  In addition, it will not install my digital camera.

  Hello

  · What happens when you insert the CD/DVD disk?

  · You receive an error message or error code when you try to install the digital camera?

  · What is the service pack installed on your computer?

  · Do you remember recent changes made to your computer before the show?

  You can run the troubleshooter from the link below and check the results. Link: It can not your CD or DVD read or write media player:http://support.microsoft.com/mats/cd_dvd_drive_problems

  You can also check: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L350D get hot and stop all of a sudden

  Hello

  I have a Satellite L350D model psle8e now 2 years old I recently met a heat problem (80 to 103 ° C) and stop suddenly.
  I installed SpeedFan 4.43 to increase the speed of my fans he said that all the
  my fans are at 0 RPM (can not control the speed of the fans), I tray to clean it but no effect.

  If anyone has a better solution or recommend a similar software.
  Will be a good help.
  H. E.: WIN 7

  Hello

  I think software is not solution. I put t know how you cleaned your laptop, but you need is professional cleaning. This means: your laptop must be disassembled and cleaned properly.

  After cleaning of cooling and cooling chimneys, grilling your laptop will be cooled properly and you won't have problems with OFF switch.

• Re: Satellite P300D-20U - I can not install display driver for Win XP

  Hi all!

  I bought the laptop P300D-20U, I installed windows XP on it.
  But now I can not install the driver to display on it.

  I downloaded from this site (it's the only display driver for this laptop).
  When I install and restart, Catalyst Control Center to write me that it do not display driver support and don't launch.
  Windows loads in resolution 640 x 480 and 4-bit color.

  When I'm changing resolution or color apears black screen and nothing happens, in 20 sec it cancels.
  I tried different drivers from ati.com but nothing works :(

  SRY for my English but I hope that you will help me guys, ty

  Hello

  Satellite P300D-20U belongs to the PSPDCE series and I think that it was equipped with the chip graphics ATI Mobility Radeon HD 3470 (M82XT).

  Did you choose this series in the form of European driver of Toshiba?

  I see the Display Driver for Win XP v 8.477.

  If you can not install using the setup.exe, then you should try to install this driver in Device Manager.
  Mark (possibly marked with yellow exclamation) graphics card then choose put up-to-date driver, use the Advanced installation procedure, point to the driver files downloaded from the Toshiba page and apply.

  It should work

• Satellite C650D/006: LAN driver not installed in win 7 installation custom

  Hi everyone, I bought a laptop Satellite C650D/006 yesterday from the original owner and he is 5 months old, but I don't like the installation of Windows 7 Home premium 32 bit OEM toshiba so I deleted from the hard drive and installed a complete installation customized windows 7 Edition home premium 32-bit and active with the OEM - COA key on the laptop.

  http://www.MyToshiba.com.au/products/notebooks/satellite/C650D/psc16a-006011/overview#details

  After installation, I noticed that the LAN controller has not been installed in Device Manager so I couldn't of internet connection to run automatic updates of microsoft for win 7,

  I went to the toshiba website and download the driver of network for this laptop and I installed it manually, and after that the laptop has been connected to the internet via an ethernet cable.

  can someone tell me why the LAN Controller software is not installed on this laptop with a custom installation of Windows 7.

  even my new dell and HP laptops install this driver when I do a custom installation of Windows 7, so why not this laptop.

  see you soon

  > can someone tell me why the LAN Controller software is not installed on this laptop with a custom installation of Windows 7.

  If I understand your message, you have deleted the preinstalled Toshiba OS and installed a clean Win 7 OS in this notebook. Right?
  This means that all drivers must be installed after the installation of Windows.
  In some cases the Win 7 use standard Microsoft drivers that are part of the operating system and some devices may be recognized automatically, but in most cases you will need to install the correct drivers.

  > even my new dell and HP laptops install this driver when I do a custom installation of Windows 7, so why not this laptop.
  Than other cell phones use the same chip as C650 LAN card? I doubt not all laptops use the same LAN chip, which means that different driver must be installed.

• Satellite Pro C850 - peripheral Audio not installed

  Satellite Pro C850, suddenly had res cross on its icon and no noise. Says the audio device not installed. Have tried deactivation/activation and also updated, no joy.

  Can anyone help?

  Fixed it, to download a driver.

• Satellite Pro L500D - I can not install the ATI from Toshiba page display driver

  I reinstalled Windows 7 Home Premium 64-bit.
  No, I have the problem, I can not install the Ati (HD 4100), downloaded displaydriver from Toshiba for my Notebookmodel.

  > Now, I installed the displaydriver of the model Satellite A500d.
  .and? Doing a job?

• Satellite A500 / 01 M - can not install the driver from nVidia page

  So I bought an A500 / 01 M over a month or two ago, and the NVIDIA drivers are not updated.

  I have the nvidia site to download new drivers, but they would not install.
  He said that the pilot was not compatible and I got get the update of my manafacturer.

  I went to the toshiba site, but I could not find my model there number... I searched and everything.
  So my current drivers are similar to 186. something and the last I think is 195.62

  How can I install on my laptop?

  Hello

  Toshiba display driver are distinguished by the drivers from nVidia or ATI and therefore the version numbers are different.
  Drivers Toshiba takes supported thermal protection that controls the dissipation of heat from the GPU chip.
  Don t support nVidia drivers this protection!

  If you can install the nVidia drivers, but only at your own risk!

  How to install it?
  Well, you have to do in the Device Manager.
  -Choose the graphics card in Device Manager
  -Update driver
  -now use the advanced option which would help you to select the driver that you downloaded from the nVidia page. You must point to the folder that contains the ini files. Ini files and DLLs are driver files.

  Welcome them

• Satellite A10: RGB Port is not installed - can not use external display

  Satellite A10 the RGB PORT is not installed & cannot be used as external display. I tried to install the communication or COM 1. interrupt code. What are the possible solutions?

  Hello

  What did you mean by "not installed"?
  Generally, you don't need to install anything. You don't need any drivers for this port 3.
  Windows XP drivers should work properly.

  Please check device manager if there are errors or yellow exclamation points.
  If the problem occurs for a short time, you can try to use the WinXP restore tool.
  This tool will reduce the BONE until the start.

• I downloaded Microsoft Security Scanner yesterday, and now it is not opening and not installed. Why is this?

  Original title: yesterday 01 December, I downloaded microsoft security scanner about 87.5 MB now afterdownloaded is not opening and why not installed

  I have downloaded microsoft security scanner which valid for nearly 10 days in the night yesterday now after downloading it is not opening let me open now obtaining a message tool use command-line sxstrace.exe for details please help

  Hi jagdishchaturvedi,

  1. what operating system do you use?
  2. you have made no changes to the computer before the broadcast took place?

  Try the steps from the following link:

  How to troubleshoot an error when you run the Microsoft Safety Scanner
  http://support.Microsoft.com/kb/2520970

  Additional information:
  The system configuration required
  http://www.Microsoft.com/security/scanner/en-us/sysreq.aspx

• VMware Tools for ESXi not in running and not installed

  (nested) Tools of ESXi does not.

  I installed an ESXi 5.5 nested on a physical and installed 5.5 ESXi host tools on the virtual ESXi5.5.

  However both the client c# as the Web Client report not (not running, not installed) tools.

  When I type 'list of software esxcli vib', I see the esx-tools-for-esxi in the list.

  I have attached the vmware.log for the nested ESXi, I use nesting for several years only and had no problems.

  Thanks in advance

  You are hiding the fact that you run in a virtual machine, if the tools do not start.  Shut down the virtual computer, remove this line from your configuration file and restart:

  monitor_control.restrict_backdoor = true

• Script out VM Tools 'Not running and not installed'

  Hi all

  I am using a script out VMs where VM tools is not installed or does not... I use the following code. It comes out all the list including toolsok and toolsold... and also has some empty fields in the output.

  I don't know there's a bug in my where statement out there... Pls help!

  Get - vm | {ForEach-Object
  $vm = get-view $_.ID | where {$_.guest.toolsstatus - not "toolsOk" - or "toolsOld"}
  $vms = "" | Select-Object VMName, VMState, ToolsStatus, ToolsVersion
  $vms. VMName = $vm. Name
  $vms. VMState = $vm.summary.runtime.powerState
  $vms. ToolsStatus = $vm.guest.toolsstatus
  $vms. ToolsVersion = $vm.config.tools.toolsversion
  $Report += $vms
  }
  $Report | ConvertTo-Html-title "VMware Tools out of Date, not installation and does not"-body "< H2 > VMware Tools out of Date, do not install and run not < / H2 > ' | Out-file - add $filelocation

  Screenshot of output is attached...

  Thank you

  VMSavvy...

  Your original script becomes

  $report = @()
  $fileLocation = "C:\test.html"
  Get-View -ViewType VirtualMachine | where {"toolsNotInstalled","toolsNotRunning" -contains $_.Guest.ToolsStatus} | %{
      $vms = "" | Select-Object VMName, VMState, ToolsStatus, ToolsVersion    $vms.VMName = $_.Name
      $vms.VMState = $_.summary.runtime.powerState
      $vms.ToolsStatus = $_.guest.toolsstatus
      $vms.ToolsVersion = $_.config.tools.toolsversion
      $Report += $vms}
  $Report | `ConvertTo-Html -title "VMware Tools Out of Date, Not Installed and Not Running" -body "
  VMware Tools Out of Date, Not Installed and Not Running
  " | `Out-File -Append $filelocation
  
  Note that the script only uses the Get-View cmdlet, this will make it considerably faster than your original version.
  

• VMWare Tools installed and not installed...

  3.5.0u4 ESX3i

  I created a Ubuntu VM. Then I added VMWare tools via the settings / installation/upgrade of VMware Tools

  (in the "status, if reported panel installation has succeeded).

  Yet, when I look in the summary of this Ubuntu VM tab, it says:

  VMware Tools: not installed

  Why is it (a power power off of the virtual machine does not change it)?

  ndhert wrote:

  I created a Ubuntu VM. Then I added VMWare tools via the settings / installation/upgrade of VMware Tools

  What you were doing just before the guest system the VMware Tools CD .iso image file. On the host Windows installation should start automatically. For Linux, you will need to mount the CD, copy the files from there to the directory and use the .tar and .rpm to install the tools.

  Read this:http://pubs.vmware.com/vi3i_e35u2/admin/BSA_Creating_VMs.14.8.html

  AWo
  VCP / VMware vEXPERT 2009

  \[:o]===\[o:]

  = Due to a lack of employees, human beings humans are working here. -Treat it with care, they are rare. =

• BT has disappeared and not install it on the Satellite A100-847

  Hello

  before 3-4 days, I changed my dvd - rom with a new because it worked not and after a few hours, I saw that the bluetooth icon is red (the bluetooth does not), but it has been turned on... (bluetooth is INTEGRATED, I'm using the toshiba bluetooth stack and I'm with Windows Vista 32-bit)

  I tried to turn on and off and he disappeared completely even from the Control Panel, and so on.
  I tried to reinstall the drivers, but it gets stuck in the window installation of drivers and what he shows me an icon of a key usb with this http://s10.photobucket.com/albums/a103/H34oBeK/?action=view¤t=bluetooth.jpg message

  It says that the usb device is faulty... and it's every time when I try to install the drivers or switch button wireless and bluetooth-> power

  I even reinstalled Windows and the same problem...

  You have any ideas?

  Please help :)

  I found the following in the post:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=133803𠪫
  --------------------------------------------------------------------------------------------------------------------------------------------
  The "Bluetooth ACPI" device is listed in the "System devices" section of the Device Manager?

  If this isn't the case, then no Bluetooth module is attached to the motherboard. It's may be unplugged if it worked before.

  If so, check your antenna switch of your laptop if it is really running material.
  Normally, a LED lights to indicate that it.
  Press + and select again the Bluetooth antenna.
  Right mouse click on the bluetooth system tray icon and select 'enable the Bluetooth radio '.
  If nothing works, then I guess that:

  * already installed another battery Bluetooth using the bluetooth module or
  * your bluetooth module has loosen or is damaged.
  --------------------------------------------------------------------------------------------------------------------------------------------