Satellite L40 - 139 - after watching the video, I can't use the virtual scrolling

Similar Questions

• No sound on Satellite L40-139 after installing XP

  Hello

  I'm trying to help a friend with his laptop computer Toshiba L40-139. It has recently (well his brother did) re-installed XP and independently to get the wireless to work, (which has now been fixed), I'll have a puzzle as to why there is no sound at all.

  He used to work in the past (before reinstalling).
  In the section "Sounds and devices" in the Panel under the volume it is said that there is "No audio device", and everything is grey. All under the "Audio" tab is also grayed out.

  I've been Googling for more than 6 hours to try to find a solution and have read a lot of threads in this section but still can not understand. I tried to find the drivers for Intel 82801GBM ICH7-M - High Definition Audio Controller everywhere, but I think I just everytime it does not work.
  I paste the Everest report below in order to give you more details on the machine.

  There is no CD with the machine he thinks he has lost them when he was moving house.
  If anyone can give me some advice on how to solve this problem, I would be grateful.

  Hi guys

  A little advice;
  You must use the option search advanced search all first issues and similar topics.
  I remember that this subject has been discussed a lot of time here and it s just a matter of research to find a solution ;)

  The solution is easy;
  Win XP needs additional MS patches; * KB835221 & KB888111 *.

  These hotfixes must be installed first before installing driver sound!

  Please check this thread for more information and details:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=100688

  Good bye

• Satellite L40 - 139 with the combination FN + volume problem

  Hello
  at first, I want to say sorry for may English. It's so good, but I'll try to explain my probblem.
  Yesterday I installed the XP system and everything works fine. After installation I can't press FN with the volume I want to say, some with works of function FN buttons, but some of them don't work. Only those function don't switch (FN + volume) volume of work and increase the volume level up/down(FN+ up/down arrow)

  Someone know how to fix/repair it?

  Marcin

  Satellite L40-139 belongs to the * PSL40E * series.
  Where did you find the Toshiba XP drivers for this laptop series?

  To my knowledge at THIS time the XP drivers are not released on the Toshiba driver page and so I guess that a driver missing XP or is not compatible BIOS might be the reason for you question.

  I think you have to wait until all drivers XP and BIOS XP will be available for you series!

  Greetings

• Satellite L40-139 - need driver Windows XP Home edition for 'ethernet '.

  Please can you send me the link to Satellite L40 ethernet control model of laptop for Windows XP Home edition?

  Hello

  Satellite L40-139 belongs to the PSL40E series. Am I wrong?
  You can check the serial number of your laptop. It should be placed somewhere at the bottom of the unit. Check all labels.

  Anyway, the Toshiba driver European page doesn't provide XP drivers for this series at this time. Seems you have to wait a bit until all pilots to be released!

  For the only moment that two versions of the BIOS for L40 PSL40E if released.
  The BIOS must be updated to the XP version, if you want to use XP on this laptop.

  By the way; It seems that this series is supported by the Base map - TX Ethernet Realtek 10/100.
  Then you can try the LAN driver from the site Web of Realtek. Should also work.

  Good bye

• Satellite L40-139: new graphics driver is causing the problem after waking from sleep

  I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.

  In the last days I've updated the software and drivers from the Microsoft Update web site.

  Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.

  Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.

  Does anyone have a definitive solution for Satellite L40?

  I looked at four options.

  1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.

  2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.

  3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.

  4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.

  Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?

  Hello Peter

  If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.

  I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.

  Please post the result.

• Cannot run the CHKDSK - Satellite L40-139 process

  When I start my laptop (Toshiba Satellite L40-139) always starts to run chkdsk
  He completed the phase 1 and then when it is at 30% through stage 2 it just goes directly to the login screen.

  I was wondering if someone can help me correct what I want to start the whole process.

  Thanks in advance.

  Hello

  You can run chkdsk after Windows has started.
  Type in the CMD COMMAND.
  The console should open and there you can use the command * chkdsk *.

  That's all.

• Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

  I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
  In the device manager says code 10 DEVICE can NOT START.

  Help, please!

  Thank you!

  Hello

  If you read here:

  http://support.Microsoft.com/kb/943104

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
  Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

  Welcome them

• Satellite L40 - 139 - I want to upgrade the RAM

  Hello
  My laptop is Toshiba Satellite L40 - 139 PSL40E model, operating system Windows XP SP3, 1 024 DDR2 RAM (667 MHz) (512 + 512).

  I want to increase the RAM memory using 2048 DDR2 RAM (1024 + 1024).

  Laptop manual can not find if support * _dual-channel memory_ *, which requires a dual-channel-capable motherboard. Theoretically, this technology double data rate of the memory.
  Someone has the manual for this laptop motheboard, or may indicate the site for download?

  Apologies for my bad English.
  Thank you.

  Hello!

  Satellite L40-139 can be upgraded to 2 GB of RAM. You can buy two modules with 1 GB of capacity with the specifications of DDR2 at 667 MHz.
  If you use two modules, they run in dual channel mode.

  The manual of the motherboard or repair for Toshiba laptops cannot be downloaded. They are only available if ASP.

  Good bye

• Satellite L40-139 - possible to disable the low battery alarm?

  I have a Toshiba Satellite L40-139 it comes with Windows Vista running. I think the battery is now a little age, because it does not load when the computer is plugged in - although the computer itself is capable of functioning when it is plugged in, which is how I use it.

  Battery sank to about 10%. For this reason, the computer will sound low-battery-warning beep every fifteen seconds or more. This seems to come from the computer itself and not the operating system, it sounds different from low battery alerts in Control Panel > sounds.

  I would like to disable this beep - it is not to tell me anything I don't already know. Until now, the only way to achieve this, I have found is by inhibition of the laptop altogether. But is not ideal, because it means that I can't use any other sound feature on the computer.

  I tried, without success, changing the settings in the control panel > power settings, including lower low and critical battery levels and fix warnings for low battery to "off".

  Any ideas?

  Hello

  Please check the BIOS settings.
  To access the BIOS F2 press Mobile start upward.
  There should be an option called something like low battery alarm
  Remember to save the changes before exiting the BIOS.

• Question about the battery life of the Satellite L40-139

  It's maybe a stupid question, but I have a portable Satellite L40-139 and the battery lasts less time, is this correct.
  In the power management, I chose energy-saving. I used to be a mobile system and it could take 2-3 hours. The answers would be great.

  The laptop uses Vista. Am I wrong?
  Well, I don't wonder that you can run Notepad only for an hour approximately.
  Vista needs for more resources as a BONE at the beginning. In addition, there are a few bugs in Vista, who have a bad influence on the performance of the battery!
  You can perform a search in internet for Vista and the problem of battery on laptops and you will find a lot of information.
  The same laptop with XP runs twice as long on battery as with Vista.

• Satellite L40-139 does not start

  ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

  Hello, I have a problem with the SATELLITE L40-139

  the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

  I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

  Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
  And viola! It works it boots etc.

  After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

  Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

  Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

  Maybe someone could help me fix without sending it to the customer service.

  See you soon.

  On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

  Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

• Cannot start XP installation on Vista Home Premium preinstalled Satellite L40-139

  Here's the problem:

  I bought a new Toshiba Satellite L40-139 in Austria and comes preinstalled Vista. OK, Vista is in German, and I don't know German. But I made a choice to learn German and to start using a Vista. After a month Vista drives me crazy (no language, just for Vista) and I want to just install XP. I didn't need something more.
  I spent more then five days trying to archive this, but without success and I am disappointed, much.

  I put aside all types of teaching and I did a lot of things, but none of them helped me.
  So the problem is like this:
  I made the partition for XP, so I have two partitions as: Vista (C), (D) XP and Datas (G) and my CD/DVD (E :).
  I activated just boot from the CD/DVD, but when I insert the CD and start the installation of Vista it tells me something like this:
  Press any key to boot from CD...
  When I do that, I get a message, which is very fast where it says something like that, (I'm not quiet sure what it says because it's fast):
  Checking your configuration...
  After that, nothing happens, don't know why, I just get black monitor and CD/DVD does not work anymore?

  It's driving crazy me and I can't install XP.
  It seems that does not recognize the CD/DVD, and I tried with several XP bootable CD/s and they work on my desk.

  Can someone help, please, because I'm going crazy?

  If you have installed XP on this notebook L40 Vista you need a BIOS update to the XP version. All that s

• Satellite L40-139 cannot boot from CD

  I have a Toshiba Satellite L40 - 139 that comes with vista installed!
  A month ago, I installed XP and it worked well!

  Yesterday I had to reinstal XP and I chose clean instal CD and an installation process, I pressed the button to open the dvd player and you finish her!

  Stupid mistake! From there if I try to boot Windows from a dvd player and the process stops at: check the configuration of your hardware! - and white screen!
  Nothing happens!
  What can I do?

  Evrything else seems to work ok!
  There is no problem with dvd player, because he reads a recovery for vista CD!
  Help, please!

  This is a really silly situation. I'm sure that this info on the suspended installation is recorded in the MBR. I recommend you do the drive clean HARD everything including MBR.

  After this try to reuse the CD of Windows XP Home edition installations.

  Good luck!

• Need hardware drivers WXP for Satellite L40-139

  Hello!

  It seems that there is no XP drivers available for Satellite L40-139.
  Is could someone please tell me where I can download drivers for the following devices:

  -Satellite L40-139
  -Audio equipment
  -Graphics controller
  Controller - ACPI!
  -Some chipset drivers (?) (Subsystem PCI or something)

  I would really appreciate any help!

  Kind regards!

  Hello

  There are no drivers of toshiba for the moment, but you can try to use the generic drivers from the manufacturers of the equipment
  (for example if the soundhardware is a realtek sound card download then www.realtek.com drivers and so on..) and operate the machine with these drivers.

  Here is a link that might help you:

  Video drivers
  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Chipset drivers

  http://www.Intel.com

  Audio drivers

  http://www.Realtek.com

  I hope that you can find the drivers you need...

  Welcome them

• What card Firewire works with Satellite L40-139?

  I have Satellite L40-139 under Vista Home Premium.
  The laptop doesn't have a Firewire interface. He has a 54mm Express card slot. I would like to add a Firewire interface, so I can import video from a camcorder. If I understand correctly, it should be possible to install an Express card (34mm or 54mm will fit) which will provide the Firewire inputs.

  Although there are a lot of these cards on the market, there are also many stories of them does not not with Vista or some Toshiba laptops.

  Can someone advise please a card that is known to work with the L-series and with Vista?

  Thank you in advance.

  Hello

  > I would like to add a Firewire interface, so I can import video from a camcorder. If I understand correctly, it should be possible to install an Express card (34mm or 54mm will fit) which will provide the Firewire inputs

  This is right.
  Satellite L40-139 supports ExpressCard location and so you can use an Express which has been equipped with a firewire interface card.

  You should google a bit, there are a lot of offers on the internet

  For example something like this:
  [Express Card + Firewire ports | http://ecx.images-amazon.com/images/I/31%2BkULZc2gL._SS500_.jpg]

  See you soon