Satellite L40-139 - cannot stop because it still restarts

Similar Questions

• Satellite L40-139 cannot boot from CD

  I have a Toshiba Satellite L40 - 139 that comes with vista installed!
  A month ago, I installed XP and it worked well!

  Yesterday I had to reinstal XP and I chose clean instal CD and an installation process, I pressed the button to open the dvd player and you finish her!

  Stupid mistake! From there if I try to boot Windows from a dvd player and the process stops at: check the configuration of your hardware! - and white screen!
  Nothing happens!
  What can I do?

  Evrything else seems to work ok!
  There is no problem with dvd player, because he reads a recovery for vista CD!
  Help, please!

  This is a really silly situation. I'm sure that this info on the suspended installation is recorded in the MBR. I recommend you do the drive clean HARD everything including MBR.

  After this try to reuse the CD of Windows XP Home edition installations.

  Good luck!

• Satellite L40-139 - cannot use function FN with Windows 7

  Hello

  I have Satellite L40 - 139 PSL40E computer laptop, I've been using windows Vista. When I was using Vista, I use the "FN" key to a sound or other, but then I have setuped the Windos7, but now I can't use the "FN" key for sound, becauze i cant find accessibility driver for Windows 7 to my laptop model.

  What can I do? How can I find?

  thnx

  For the FN feature, you must install Toshiba Value added Package.
  Have you already installed?

• Cannot use MS Paint tool - error with Vista on Satellite L40-139

  I recently reinstalled my windos vista family premium from the backup drive, because my laptop refuses to boot and start the recovery file not found...

  Since then, I have tried to load the application of paint and had an error: microsoft paint has stopped working.
  When I tried to access the event viewer to check the erros, I get another error...
  Management Console Microsoft has stopped working...

  I don't know what to do I need paint I have no office program and problems accessing a link of a site.
  I use regularly and need to send a screenshot...

  Any help would be much appreciated, I have

  Toshiba satellite l40-139
  Windows vista Home premium SP2 32-bit.
  1 GB of ram
  o free 31.1 Go Go 55.6 (c).
  54 GB of 54.6 GB free on (e)

  Hello

  Just a tip;
  If you need an office application then I recommend OpenOffice.
  It s software open source similar to MS Office and you can use and download it for free!

  The issue of your pain.
  The painting is part of the Windows OS. It of not possible to uninstall it.
  File paint.exe is placed in the folder c:\windows\system32\

  There seems to be an error of operating system... maybe the system is confused upward...
  try to clean the operating system using the CCleaner...
  It cleans the registry and maybe it helps to get rid of this error...

  otherwise, you need to reinstall the operating system...

• Cannot start XP installation on Vista Home Premium preinstalled Satellite L40-139

  Here's the problem:

  I bought a new Toshiba Satellite L40-139 in Austria and comes preinstalled Vista. OK, Vista is in German, and I don't know German. But I made a choice to learn German and to start using a Vista. After a month Vista drives me crazy (no language, just for Vista) and I want to just install XP. I didn't need something more.
  I spent more then five days trying to archive this, but without success and I am disappointed, much.

  I put aside all types of teaching and I did a lot of things, but none of them helped me.
  So the problem is like this:
  I made the partition for XP, so I have two partitions as: Vista (C), (D) XP and Datas (G) and my CD/DVD (E :).
  I activated just boot from the CD/DVD, but when I insert the CD and start the installation of Vista it tells me something like this:
  Press any key to boot from CD...
  When I do that, I get a message, which is very fast where it says something like that, (I'm not quiet sure what it says because it's fast):
  Checking your configuration...
  After that, nothing happens, don't know why, I just get black monitor and CD/DVD does not work anymore?

  It's driving crazy me and I can't install XP.
  It seems that does not recognize the CD/DVD, and I tried with several XP bootable CD/s and they work on my desk.

  Can someone help, please, because I'm going crazy?

  If you have installed XP on this notebook L40 Vista you need a BIOS update to the XP version. All that s

• Cannot run the CHKDSK - Satellite L40-139 process

  When I start my laptop (Toshiba Satellite L40-139) always starts to run chkdsk
  He completed the phase 1 and then when it is at 30% through stage 2 it just goes directly to the login screen.

  I was wondering if someone can help me correct what I want to start the whole process.

  Thanks in advance.

  Hello

  You can run chkdsk after Windows has started.
  Type in the CMD COMMAND.
  The console should open and there you can use the command * chkdsk *.

  That's all.

• Satellite L40 - 139 - after watching the video, I can't use the virtual scrolling

  Hello

  I own a Toshiba Satellite L40-139 under Windows Vista 32-bit. However, I think that this problem only applies to this model as other users are experiencing the same thing.

  I often watch videos online mode full screen (like on YouTube), but when I leave full-screen mode, I noticed that virtual scrolling stops working on the touchpad. This occurs in the latest versions of Internet Explorer and Firefox. I can still move the pointer, but cannot scroll. I also note that the icon in the taskbar freezes, because it does not meet all the movements on the touchpad. I have the latest version of the driver installed (10.0.3.0).

  Is it possible for Toshiba to issue an updated driver for the Synaptics pointing device which solves this problem?

  Thank you

  Hello

  It's the first time that someone has posted this question
  I checked this on my Satellite U400 and quest that; the touchpad works ok
  There may be a registry problem with your operating system who knows
  It would be interesting to know how the touchpad scroll function works by using the new OS installed

• Satellite L40-139 does not start

  ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

  Hello, I have a problem with the SATELLITE L40-139

  the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

  I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

  Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
  And viola! It works it boots etc.

  After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

  Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

  Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

  Maybe someone could help me fix without sending it to the customer service.

  See you soon.

  On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

  Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

• Satellite L40 - 139 - I want to upgrade the RAM

  Hello
  My laptop is Toshiba Satellite L40 - 139 PSL40E model, operating system Windows XP SP3, 1 024 DDR2 RAM (667 MHz) (512 + 512).

  I want to increase the RAM memory using 2048 DDR2 RAM (1024 + 1024).

  Laptop manual can not find if support * _dual-channel memory_ *, which requires a dual-channel-capable motherboard. Theoretically, this technology double data rate of the memory.
  Someone has the manual for this laptop motheboard, or may indicate the site for download?

  Apologies for my bad English.
  Thank you.

  Hello!

  Satellite L40-139 can be upgraded to 2 GB of RAM. You can buy two modules with 1 GB of capacity with the specifications of DDR2 at 667 MHz.
  If you use two modules, they run in dual channel mode.

  The manual of the motherboard or repair for Toshiba laptops cannot be downloaded. They are only available if ASP.

  Good bye

• Satellite L40-139 - possible to disable the low battery alarm?

  I have a Toshiba Satellite L40-139 it comes with Windows Vista running. I think the battery is now a little age, because it does not load when the computer is plugged in - although the computer itself is capable of functioning when it is plugged in, which is how I use it.

  Battery sank to about 10%. For this reason, the computer will sound low-battery-warning beep every fifteen seconds or more. This seems to come from the computer itself and not the operating system, it sounds different from low battery alerts in Control Panel > sounds.

  I would like to disable this beep - it is not to tell me anything I don't already know. Until now, the only way to achieve this, I have found is by inhibition of the laptop altogether. But is not ideal, because it means that I can't use any other sound feature on the computer.

  I tried, without success, changing the settings in the control panel > power settings, including lower low and critical battery levels and fix warnings for low battery to "off".

  Any ideas?

  Hello

  Please check the BIOS settings.
  To access the BIOS F2 press Mobile start upward.
  There should be an option called something like low battery alarm
  Remember to save the changes before exiting the BIOS.

• Toshiba Satellite L40-139 - XP sound card driver problem

  Hello
  I'm having a problem to install the driver of sound card in Toshiba Satellite L40-139, I installed windows XP with SP3, all the other drivers that works very well, but I'm unable to install the sound card driver, I have tried all the King of the drivers from the site of toshiba and sites of HRD, I installed some microsoft pathces (KB835221 & KB888111) but still nothing.

  > I found a solution

  Thanks for sharing

• Problem with Windows XP on Satellite L40-139

  Hello Toshiba user community!

  I'm new here but I'll cut right to the chase with my problem.

  I have a Toshiba Satellite L40 - 139 (PSL40E) model that was included with Windows Vista Home Premium installed and all perfectly installed software. I recently got a Windows XP Professional SP2 through MSDNA of my college (a Microsoft service for universities) and has installed because Windows Vista, although very looking shifted the laptop as hell.

  The installation went smoothly. I installed all the drivers that showed the question mark (as the display driver, audio, modem, etc.). I experienced a few problems. They are presented below as well as a few questions:

  1. I can't use the Fn function more. While Fn + F8 works, I can't turn the volume upwards or downwards using Fn + arrow up / Fn + arrow key or any other combination.

  2. the display driver although it shows that it is perfectly installed it seems that it is not.
  a. I do not have the optino of display properties when I right click on the desktop.
  b. I recently installed Gothic I, who had previously worked on my L40 and now after playing the intro, I do not see the menu. It's dark, but the sound can be heard as the navigation menu. If I manage to press new surprise of game, it's always black and sometimes it shows a random graphic error.
  I tried to install the Toshiba page display driver. And after that he has not changed a thing I downloaded one from the Intel site. Same thing!

  Do you know a sollution?

  3 another problem, although as unrelated to the laptop is the for my laptop model Toshiba download page only shows the "how to install Windows XP.pdf" file. " This is for the Windows XP operating system. If you change to Vista you get a lot of pilots. It would almost seem Toshiba would force me to HAVE Vista so that my Satellite wo works properly. Any ideas?

  4. do you know a good tutorial on how to install Windows XP for Toshiba L40 laptop? Especially for the L40 - 139 (PSL40E)?

  5. If Windows XP succeeded withought problem to see my hard drive is necessary to install the driver Toshiba mentions in his XP installation tutorial? I mean he should improve performance or not?

  Thank you in advance,
  I will adjust your answers tomorrow!

  Best regards!

  Robert Mocanu

  Hi Robert,.

  I think that there is no such thing as a tutorial for installing Windows XP on your machine. But you can count the installation instructions provided on the page to Toshiba, because WinXP installation is all about good pilot order.

  Have you tried to select as model number short "all"? You can find many drivers and I am sure that these will work very well for your laptop.
  I'd say reinstall with the Toshiba page display drivers and try again. And install the latest version of direct X 9.

  OK, Gothic I is not a new game, but worth a try anyway.
  Ditto for the FN keys. Just follow the installation instructions and download and run driver configurations.

• Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

  I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
  In the device manager says code 10 DEVICE can NOT START.

  Help, please!

  Thank you!

  Hello

  If you read here:

  http://support.Microsoft.com/kb/943104

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
  Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

  Welcome them

• Audio drivers for Satellite L40-139

  SOS,
  For the last 3 weeks I'm searching the Internet to find:

  * Sound drivers for toshiba Satellite L40-139 *.
  Toshiba even does not have.

  CAN someone HELP Sound drivers for toshiba Satellite L40-139 please.

  Thank you

  Hello

  Are you sure that Toshiba does not provide drivers for this laptop model?
  I think you are wrong buddy.

  Have you checked the Archive box on the European driver Toshiba page?
  I found the series Satellite L40 PSL40E and L40-139 belongs to this series

  There are all the drivers for this device

  It is interesting to check this new ;)

• Last update of BIOS for Satellite L40-139 model PSL40E

  Hello

  I have laptop Satellite L40 - 139 model PSL40E, operating system Windows XP SP3.
  I want to now what is the latest Bios Update for my laptop, a shortcut for the download.
  Thank you.

  Update the BIOS for Windows XP Home edition is not available. Only for the portable Vista preinstalled.
  You have some problems with the feature?
  If everything works well the BIOS update should not be done.